Top Power Miter Saws Single Bevel Reviews

Metabo HPT MultiVolt 36V Sliding Miter Saw 10-Inch Blade Dual Bevel Includes Battery & Charger C3610DRAQA

MULTIVOLT: Miter saw can be powered by a MultiVolt 36 Volt battery (included) or the MultiVolt AC adapter(sold separately).
FEATURING: Dual bevel sliding miter saw providing the power and precision a pro demands.
INCLUDES: 36 volt miter saw, 4 AH battery and charger.
AWARD: Rated Best 10-Inch Miter Saw by Pro Tool Reviews 2020.
MITER AND BEVEL: Miter and bevel: 0-60 degree miter angle to the right and 0-55 degree miter angle to the left and also 0-48 degree bevel angle range....

Check Stock

ACEgoes 12" Miter Box with Saw Included, Reinforced Steel Back Saw for Accurate Cutting, Preset 90 Degree 45 Degree 22.5 Degree and 0 Degree Cuts

☘【Accuracy】The cam-shaped pins can be twist and lock with honeycomb base to secure work for accurate cuts..
☘ 【4 Cut Angles】Vertical slots in the miter box allow for the wood to be cut at 45 degrees, 22 1/2 degrees, and 90 degrees. and bevel cut at 45 degrees..
☘【Durable】This miter box is made of high-impact polystyrene, sturdy built 1.5lb better than normal. and The reinforced saw blade is made of premium steel, double-sided mechanical grinding..
☘【Safe】Minor injuries are the most you can expect when properly using a manual miter saw.
☘【Quiet】Little noise will not bother others compared to power saws.

Check Stock

DEWALT FLEXVOLT 60V MAX* Circular Saw for Framing, 7-1/4-Inch, Tool Only (DCS577B)

A BETTER WAY TO MEASURE - The M1 Caliber is a fully integrated, patent-pending, measuring tool that clamps to almost any kind of saw fence and outputs measurements of materials slid underneath its wheel on a large, backlit, LCD screen..
DIGITIZE YOUR MITER SAW - Using modern technology with a focus on functionality, measure and cut stock materials up to 3 times faster than conventional methods and measuring tools. The M1 Caliber eliminates the need for a tape measure and pencil..
COMPATIBILITY - Displays both English and Metric measurements and is compatible with most miter, cut-off, chop and vertical band saws. Make miter, bevel, compound, and straight cuts on a variety of materials ranging from boards to composites to pipe..
INCREASED SAFETY - Whether cutting dimensional lumber to frame out a home, cutting composite planks for decking or putting the finish touches on an interior job, the M1 centralizes measurement related activity to a single location..
QUICK AND EASY SETUP - Clamp to your saw fence, release the arm, input your blade thickness and begin to cut. Perfect for professionals, contractors, woodworkers and other tradespeople. The M1 will provide the most accurate read on smooth materials..

Check Stock

MASTEC 8 Inch 64 Tooth Circular Saw Blade Anti Kickback Tooth for Wood Cutting with 5/8-Inch Arbor

【Application】:Fast smooth clean cutting and widely used in Miter Saws, Circular Saws, Table Saws, Hand Saws and Chop Saws..
【ATB Tooth】:Alternate Top Bevel Teeth blade ideal for cutting all kinds of wood.Such as Hard Wood,Soft Wood,Plywood,Chipboard..
【Anti-Kickback Shoulder】:For safety reasons,preventing inversion of saw blade during cutting..
【Specification】:8 inch 64T fine finishing wood cutting blade with a 5/8 inch arbor..
【Good Service】:Please contact us if you have any questions about this saw blade.We guarantee the 100% replacement.Any problems will be solved within 24 hours..

Check Stock

DEWALT 12-Inch Compound Miter Saw Double-Bevel, 15-Amp (DW716)

POWER AND DURABILITY: 15 amp, 3,800 rpm motor.
MITER DETENT PLATE IMPROVES PRODUCTIVITY AND ENSURES CUTTING ACCURACY: Adjustable stainless steel miter detent plate with 14 positive stops.
MITER DENTENT OVERRIDE that allows you to override the miter stops and adjust to the desired setting without the saw slipping into the miter detents.
EASIER BEVEL CUTS: Tall sliding fences support crown molding up to 6-5/8-inch nested and base molding up to 6-1/2-inch vertically against the fence while easily sliding out of the way for bevel cuts.
CROSS CUT CAPACITY up to 2x8-Inch dimensional lumber at 90 and a 2x6-Inch dimensional lumber at 45.
DOUBLE BEVEL DESIGN: Double bevel design allows saw to bevel left and right 0 - 48 degree with positive stops at 0, 33.9, 45, and 48 degrees both left and right allowing user to flip the saw not the material.
OPTIMIZED CUTTING ACCURACY: Innovative gearbox and belt-drive design increases vertical cutting capacity.
Precise miter system and machined-base fence support optimized cutting accuracy.
LIGHTWEIGHT & PORTABLE: Lightweight design, head lock-down pin, and built-in carry handle for portability.
INCLUDES carbide blade, blade wrench, dust bag, vertical clamp and comfortable side handles in the base.

Check Stock

DEWALT Miter Saw, Double-Bevel, Compound, 12-Inch, 15-Amp (DWS716)

POWER AND DURABILITY: 15 amp, 3,800 rpm motor.
MITER DETENT PLATE IMPROVES PRODUCTIVITY AND ENSURES CUTTING ACCURACY: Adjustable stainless steel miter detent plate with 14 positive stops.
MITER DENTENT OVERRIDE that allows you to override the miter stops and adjust to the desired setting without the saw slipping into the miter detents.
EASIER BEVEL CUTS: Tall sliding fences support crown molding up to 6-5/8-inch nested and base molding up to 6-1/2-inch vertically against the fence while easily sliding out of the way for bevel cuts.
CROSS CUT CAPACITY up to 2×8-Inch dimensional lumber at 90° and a 2×6-Inch dimensional lumber at 45°.
DOUBLE BEVEL DESIGN: Double bevel design allows saw to bevel left and right 0 – 48 degree with positive stops at 0, 33.9, 45, and 48 degrees both left and right allowing user to flip the saw not the material.
OPTIMIZED CUTTING ACCURACY: Innovative gearbox and belt-drive design increases vertical cutting capacity. Precise miter system and machined-base fence support optimized cutting accuracy.
LIGHTWEIGHT & PORTABLE: Lightweight design, head lock-down pin, and built-in carry handle for portability.
INCLUDES carbide blade, blade wrench, dust bag, vertical clamp and comfortable side handles in the base.

Check Stock

Metabo HPT 10-Inch Sliding Compound Miter Saw Double-Bevel Electronic Speed Control 12 Amp Motor Electric Brake 5-Year Warranty C10FSBS

MOTOR: 12 amp motor for professional power.
BEVEL: 0-45 degree bevel angle range, to the right and left allowing users to quickly and easily flip the saw blade and leave the material in place.
MITER: 57 degree miter angle to the right, for ultra flexibility with 45 Degree miter angle to the left.
MITER SCALE: White on black miter scale for superior accuracy and visibility.

Check Stock

Portamate Tool Mounts for Miter Saw Stands and Work Centers PM-7002

Attach and detach power tools and machines to tool stands quickly and easily.
Works with miter saws, routers, band saws, scroll saws, and many other power tools.
Mounts sit flat when not attached to stand and tools can be used on bench or other work surface.
Set of 2 power tool mounts work with most Bora Portamate miter saw stands.

Check Stock

CMT 213.040.10 Industrial General Purpose Saw Blade, 10-Inch x 40 Teeth 20° ATB Grind with 5/8-Inch Bore, PTFE Coating

For rip and crosscuts with exceptional finish. Excellent rip and crosscut on wood. Good on plywood..
To be used on adial arm saws, miter saws, table and special saws..
0.126 kerf thickness, 0.098 plate thickness, 18° hook angle, 20° Alternate Top Bevel Grind..
Micrograin carbide teeth to last longer and deliver smooth cuts..
Non-Stick PTFE Coating keeps blade running cool, reduces pitch buildup, protects against corrosion..

Check Stock

POWERTEC - MT4000 Deluxe Portable Miter Saw Stand with Wheels

INCLUDES: (1) Portable Miter Saw/ Planer Table.
FUNCTION: A hassle-free and practical workstation stand for miter saws, planers, chop saws and other bench top-tools.
FEATURES: Portable design with super-grip 8-inch rubber wheels, spring-loaded locking legs for easy set-up and break down, universal quick-release....
SELF POWER SUPPLY: Flaunts a convenient 110V 3-3 prong power strip along the lower base to eliminate the need of a nearby outlet for your power tools.
PREMIUM BUILD: Miter saw work station is made with high quality round steel tubing for superior industrial strength that supports a 330 lbs maximum....

Check Stock

REEKON M1 Caliber Measuring Tool for Miter, Chop, and Band Saws – Eliminates Need to Measure & Mark Materials, Reduces Cut Time and Increases Safety, Measures Flat & Round Materials

A BETTER WAY TO MEASURE - The M1 Caliber is a fully integrated, patent-pending, measuring tool that clamps to almost any kind of saw fence and outputs measurements of materials slid underneath its wheel on a large, backlit, LCD screen..
DIGITIZE YOUR MITER SAW - Using modern technology with a focus on functionality, measure and cut stock materials up to 3 times faster than conventional methods and measuring tools. The M1 Caliber eliminates the need for a tape measure and pencil..
COMPATIBILITY - Displays both English and Metric measurements and is compatible with most miter, cut-off, chop and vertical band saws. Make miter, bevel, compound, and straight cuts on a variety of materials ranging from boards to composites to pipe..
INCREASED SAFETY - Whether cutting dimensional lumber to frame out a home, cutting composite planks for decking or putting the finish touches on an interior job, the M1 centralizes measurement related activity to a single location..
QUICK AND EASY SETUP - Clamp to your saw fence, release the arm, input your blade thickness and begin to cut. Perfect for professionals, contractors, woodworkers and other tradespeople. The M1 will provide the most accurate read on smooth materials..

Check Stock

SKIL 75540 4-3/8-Inch by 40T Carbide Flooring Blade

Home Power Tools Saws Parts Circular Saw Blades.
Great for cutting laminate floor, solid wood floor, and engineered wood floor.

Check Stock

CMT 222.080.10 Industrial Plexiglass and Plastic Saw Blade, 10-Inch x 80 Teeth MATB Grind with 5/8-Inch Bore

Heavy-duty cutting, smooth finish with no melting. For radial arm saws, miter/table, special saws..
Cut thin plastic, phenolic, plexiglass, vinyl, laminate flooring and plywood..
0.110 kerf thickness, 0.087 plate thickness, -3° hook angle, Alternate top bevel with chamfer grind..
Chrome carbide cutting edges guarantee long cutting performance..
Anti-vibration design, expansion slots to reduce noise, tight tolerance, longer lifetime..

Check Stock