Top Power Tile Masonry Saws Reviews

Dremel US540-01 Ultra-Saw 3.5-Inch Tile Diamond Blade , White

  • 3.5” premium diamond coated cutting wheel for cutting wall tile & floor tile..
  • Cuts most tile and masonry materials with ease and precision..
  • Ability to also cut porcelain, slate, stone, cement backer board..
  • Compatible with all Dremel corded and cordless Ultra Saws..
Check Stock

BRSCHNITT Diamond Blade Set,5 Inch Arbor 7/8\ - 5/8\ for Granite,Stone,Masonry,Terrazzo,Paver,Concrete,Pack of 2 Dry/Wet Circular Saw Cutter Angle Grinder Diamond Cutting Disc 125mm

  • ✔Size --Total 2pcs,5"(125mm),segment height 7mm ,turbo rim segment thickness 2.4mm ,segmented rim segment thickness 2mm,Arbor 22.23mm(7/8-Inch) ,includes a 20mm(4/5") and 16mm(5/8") arbor adapter Bushing in the package.
  • ✔Our diamond cutting wheel are designed to provide fast, smooth and extremely clean cutting in a variety of materials, including masonry brick, granite, marble,concrete,stone,slate and stucco.
  • ✔Turbo rim diamond cutting saw blade and general purpose power saw segmented diamond blade for smooth & fast cutting of Granite,Stone,Masonry,Terrazzo, Paver,Concrete.
  • ✔Our blades are suitable for Dry or Wet Cutting,More efficient by Dry Cutting and Wet Cutting for long life time.
  • ✔Machine --For use on Tile saws, circular saws, and angle grinders.It is suitable for 7 / 8 "inner hole machine, also suitable for 4/5" or 5 / 8 "inner hole machine through arbor adapter Bushing.
Check Stock

Delta Diamond Boss Hog 7 Inch Turbo Premium Diamond Blade for Masonry, Brick, Block, Pavers, Concrete, Stone, Wet/Dry Cutting, Continuous Rim (7\)

  • PREMIUM TURBO DIAMOND BLADE - Boss Hog Turbo diamond blades are high performance, fast cutting, and long lasting. Ideal for when you need to leave a smooth, clean finish. Cooling holes help keep the blade cool for continuous use for construction. Comparable to other major brands..
  • GENERAL PURPOSE CHIP FREE CUTTING - Use for general purpose cutting of concrete, masonry, brick, block, pavers, roofing tile, terrazzo, and all similar materials. Compatible with all hand-held angle grinders, circular saws, or masonry saws with DM, 5/8.
Check Stock

BRSCHNITT Diamond Blade Set,4-1/2 Inch Arbor 7/8" - 5/8" for Granite,Stone,Masonry,Terrazzo,Paver,Concrete,Pack of 2 Dry/Wet Circular Saw Cutter Angle Grinder Diamond Cutting Disc 115mm

  • ✔Size --Total 2pcs,4 1/2"(115mm),segment height 7mm ,turbo rim segment thickness 2.2mm ,segmented rim segment thickness 2mm,Arbor 22.23mm(7/8-Inch) ,includes a 20mm(4/5") and 16mm(5/8") arbor adapter Bushing in the package.
  • ✔Our diamond cutting wheel are designed to provide fast, smooth and extremely clean cutting in a variety of materials, including masonry brick, granite, marble,concrete,stone,slate and stucco.
  • ✔Turbo rim diamond cutting saw blade and general purpose power saw segmented diamond blade for smooth & fast cutting of Granite,Stone,Masonry,Terrazzo, Paver,Concrete.
  • ✔Our blades are suitable for Dry or Wet Cutting,More efficient by Dry Cutting and Wet Cutting for long life time.
  • ✔Machine --For use on Tile saws, circular saws, and angle grinders.It is suitable for 7 / 8 "inner hole machine, also suitable for 4/5" or 5 / 8 "inner hole machine through arbor adapter Bushing.
Check Stock

Delta Diamond Boss Hog 7 Inch 3 Pack Turbo Premium Diamond Blade for Masonry, Brick, Block, Pavers, Concrete, Stone, Wet/Dry Cutting, Continuous Rim (7\ 3 Pack)

  • PREMIUM TURBO DIAMOND BLADE - Boss Hog Turbo diamond blades are high performance, fast cutting, and long lasting. Ideal for when you need to leave a smooth, clean finish. Cooling holes help keep the blade cool for continuous use for construction. Comparable to other major brands..
  • GENERAL PURPOSE CHIP FREE CUTTING - Use for general purpose cutting of concrete, masonry, brick, block, pavers, roofing tile, terrazzo, and all similar materials. Compatible with all hand-held angle grinders, circular saws, or masonry saws with DM, 5/8.
Check Stock

6 Inch Carbide Hole Saw Bit Concrete Hole Saw 152mm Carbide Hole Cutter Drill Stucco Brick Fiberglass Reinforced Plaster And Ceramic Tile Saw Through Cement Block and Drywall For Recessed Lighting

  • ...rick Walls To Run Conduit For Electric Cables And Pvc Water Pipes And Waste Pipes..
  • TILE HOLE SAW Drill Ceramic Wall Tiles And Low Density Subway Tile Without Hammer Drill Setting, When Used As Concrete Tools Hammer Drill Is A Must So The Tct Hole Saws Are Best Used With Our Hole Saw Abors That Already Come With Tct Masonry Drill Bits For Pilot Bit No Point Having A Hole Saw That Can Cut Holes In Brick If The Pilot Drill Set Will Not..
  • MANY SIZE GRIT HOLESAW BITS Available Either As Carbide Hole Saw Kit Or Individually From 5/8 16mm To 7" 178mm, These Tungsten Holesaw Bits Are Also Available Including Hex Hole Saw Arbor Or Including Sds Plus Hole Saw Arbor Mandrel inc TCT Pilot.
  • WHO USES OUR CARBIDE HOLE SAWS Plumbers Electricians Contractors for Masonry Tools Home Builders Boat Builders Aviation FiberGlass Car Body Installers Fiberglass Pool and Fiberglass Tub Manufacturers Carbon Fiber Modellers Hobbyists..
Check Stock

4.5 Inch Diamond Blade, Segmented Diamond Saw Blade for Angle Grinder, General Purpose Cutting Concrete, Block, Paver, Brick, Masonry and Stone, Wet/Dry Cut, 7/8\ Arbor

  • Manufacturing Technique: Sinter Hot-pressed Segmented Diamond Saw Blade. It achieves a faster cutting speed and longer cutting life-span in different materials..
  • Superior Quality designed for fast speed and stable life to cut Concrete, Block, Paver, Brick, Masonry and Stone and other abrasive materials..
  • The segmented diamond cutting blade is suitable to be used on the angle grinders, circular saws, tile saws, hand-held power saw. Please follow the safety symbols before the cutting work starts..
  • It’s Universal application in dry or wet cutting.
  • Segment Height: 10mm, Arbor Size: 7/8” with 5/8” copper bushing..
Check Stock

4 Inch Carbide Hole Saw Bit Concrete Hole Saw for Dryer Vent and Drywall for Recessed Lighting 102mm Carbide Hole Cutter for Stucco Brick Fiberglass Reinforced Plaster Ceramic Tile and Cement blocks

  • ...rick Walls To Run Conduit For Electric Cables And Pvc Water Pipes And Waste Pipes..
  • TILE HOLE SAW Drill Ceramic Wall Tiles And Low Density Subway Tile Without Hammer Drill Setting, When Used As Concrete Tools Hammer Drill Is A Must So The Tct Hole Saws Are Best Used With Our Hole Saw Abors That Already Come With Tct Masonry Drill Bits For Pilot Bit No Point Having A Hole Saw That Can Cut Holes In Brick If The Pilot Drill Set Will Not..
  • MANY SIZE GRIT HOLESAW BITS Available Either As Carbide Hole Saw Kit Or Individually From 5/8 16mm To 7" 178mm, These Tungsten Holesaw Bits Are Also Available Including Hex Hole Saw Arbor Or Including Sds Plus Hole Saw Arbor Mandrel inc TCT Pilot.
  • WHO USES OUR CARBIDE HOLE SAWS Plumbers Electricians Contractors for Masonry Tools Home Builders Boat Builders Aviation FiberGlass Car Body Installers Fiberglass Pool and Fiberglass Tub Manufacturers Carbon Fiber Modellers Hobbyists..
Check Stock

4.5 Inch Diamond Blade, Diamond Turbo Saw Blade for Angle Grinder, General Purpose Cutting Concrete, Masonry, Brick, Granite, Marble and Other Stone, Wet/Dry Cut, 7/8\ Arbor

  • Manufacturing Technique: Sinter Hot-pressed Segmented Diamond Saw Blade. It achieves a faster cutting speed and longer cutting life-span in different materials..
  • Superior Quality designed for fast speed and stable life to Cut Concrete, Masonry, Brick, Granite, Marble and Other Stone materials..
  • The diamond turbo cutting blade is suitable to be used on the angle grinders, circular saws, tile saws, hand-held power saw. Please follow the safety symbols before the cutting work starts..
  • It’s Universal application in dry or wet cutting..
  • Segment Height: 10mm, Arbor Size: 7/8” with 5/8” copper bushing..
Check Stock

Bardland JC-156 Diamond Blade 6” (156mm) - Fast and Smooth Wet and Dry Cutting Circular Saw for GP Construction/Concrete/Roof Tiles/Stone(JC-156 6\/ 1 Packing)

  • SPECIFICATIONS: Made of premium Metal Components and High Quality Diamond Grits - Diameter - 6" (156mm) / Thickness 0.086"(2.2mm) – For Wet & Dry Cutting - ⅞” Arbor suitable for Angle Grinders, Circular Saws, Masonry Saws and Gas Cut-Off Saws..
  • FAST SMOOTH CUTTING – With Max 9000 RPM, these premium general purpose blades are produced specifically for use with construction materials such as concrete, roof tiles, stone and more..
  • FOR THE PERFECT JOB EVERY TIME - High quality and high performance these circular saw blades perform better and longer than other diamond saw blades. Whether you are a construction worker, plumber, tile installer, roof worker, DIY enthusiast or for work in your home studio, this is the perfect blade for you..
  • SPEEDY CUT WITH MINIMAL DUST due to the thin kerf we have used in developing this high-quality diamond masonry blade..
  • MAIN FEATURES: The product is 6" High Performance Blade, High Performance diamond matrix provides 200x's the life of conventional abrasives and enhanced material removal..
Check Stock

Bardland HNT-156 Diamond Blade 6” (156mm) - Fast and Smooth Wet and Dry Cutting Circular Saw for GP Construction/Concrete/Roof Tiles/Stone(HNT-156 6\/ 1 Packing)

  • SPECIFICATIONS: Made of premium Metal Components and High Quality Diamond Grits - Diameter - 6" (156mm) / Thickness 0.086"(2.2mm) – For Wet & Dry Cutting - ⅞” Arbor suitable for Angle Grinders, Circular Saws, Masonry Saws and Gas Cut-Off Saws..
  • FAST SMOOTH CUTTING – With Max 9000 RPM, these premium general purpose blades are produced specifically for use with construction materials such as concrete, roof tiles, stone and more..
  • FOR THE PERFECT JOB EVERY TIME - High quality and high performance these circular saw blades perform better and longer than other diamond saw blades. Whether you are a construction worker, plumber, tile installer, roof worker, DIY enthusiast or for work in your home studio, this is the perfect blade for you..
  • SPEEDY CUT WITH MINIMAL DUST due to the thin kerf we have used in developing this high-quality diamond masonry blade..
  • MAIN FEATURES: The product is 6" High Performance Blade, High Performance diamond matrix provides 200x's the life of conventional abrasives and enhanced material removal..
Check Stock

Super Thin Diamond Porcelain Saw Blade with X Teeth,BRSCHNITT 8 Inch (200mm) Diamond Cutting Disc with Reinforced Core Center for Dry/Wet Cutting Porcelain Tile Ceramic Marble Granite

  • ✔Size --8 inch (200mm),diamond height 10mm ,segment thickness 1.8mm ,Arbor 1"-7/8"-5/8"(25.4mm-22.23mm-16mm) , wet or dry cutting.
  • ✔High Performance --The reinforced core center helps to keep balance,unique X Mesh Rim design allows for less friction and more efficient heat dispersion for superior cutting performance.
  • ✔Wide Applications --A blade engineered for extremely smooth cutting of porcelain tile, ceramic tile, marble, granite,masonry and other natural stone.
  • ✔Fast And Smooth Cutting --Chip-free,offer faster cutting speed,guarantee a precise and smooth edge finish.
  • ✔Machine --For use on Tile saws, circular saws, and hand-held angle grinders.
Check Stock

PEAKIT Tile Cutter Blade 4.5 Inch Porcelain Diamond Blade Ceramic Cutting Disc Wheel for Angle Grinder Reversible Color

  • ✔ Peakit Super thin turbo mesh rim diamond blade provide fast, precise, smooth and chip-free cutting experience for you. Thicker center to avoid....
  • ✔ Our Diamond blade can be used as porcelain tile blade, ceramia tile blade, granite blade and other thin masonry blade..
  • ✔ This 4 1/2 inch tile cutter blade features a 3/8" diamond rim, can be used dry or wet, fits most tile saws and hand-held angle grinders with a....
  • ✔ It is the ideal diamond saw blade for tile installer, general contractors, home made DIYers and tradesmen..
  • ♥ What you will get: fast 4 1/2" diamond blade 1 pcs, lifetime warranty against warping, cracking and material defects, superior customer service..
Check Stock