Top Performance Intake Manifold Gasket Reviews

Mota Performance A40250 Manifold Heat Spacer Kit - 1/2\ Ford GT40

Manufactured from heat resistant phenolic resin.
Cooler and denser upper intake air improves throttle response and performance.
Manufactured from heat absorbing phenolic resin.
Insulates Throttle Body and Manifold from engine heat.

Check Stock

Tektall Intake manifold adapter for TBI adapts a small block 1.75" bore throttle body injection 1" thick Fits Pattern 2-barrel Manifold 500 350 CFM early carbs Alloy Durable

【Fitment】Tektall Alloy Intake manifold adapter for TBI adapts a small block 1.75" bore throttle body injection 1" thick Fits Pattern 2-barrel Manifold 500 350 CFM early carbs..
【Good Quality】 It is made of solid alloy with high finish. The installation hardware and installation sealing gasket are as shown in the figure. It can be installed without purchasing additional bolts. Everything you need is in the package, as shown in the picture. Please use studs if possible, do not over-tighten, and the correct design is suitable for its intended application without vacuum leakage..
【High performance】 Tektall intake manifold adapters are threaded into smooth aluminum castings to safely install carbohydrate studs. The shape of the holes provides a smooth transition from carbohydrates to air intakes. Just turn the key and it will start immediately. It will definitely improve your throttle response..
【Package includes】 1 X Intake manifold adapter, 2 X Gaskets, 1 X Mounting Hardware kit, 1 X Manual..
【NOTE】 Please confirm the item if it matches your machine before you purchase. All Tektall products will undergo strict inspections and strong packaging before shipment.Please rest assured to purchase.Thanks..

Check Stock

FEL-PRO VS 50442 R Valve Cover Gasket Set

BRTEC Automotive Replacement Head Gasket Sets Package List- Head Gasket, Intake & Exhaust Manifold Gasket, Valve Cover Gasket, Viton Valve Stem Seals/ Grommets, Other O-Rings/ Seals, Other Small Gaskets, and Other Engine Sealing Kits.
( Please refer to the first image to confirm the components you may receive, we always check every package before shipment, please massage us for a replacement if there are missing parts after you receiving the package )..
Head Gasket Part Number: ES71313, HS26181PT, HS26181PT-1, HS26181PT-3, TS2618100HBSI.
Check Before Purchasing - Please check the d....

Check Stock

Dorman 615-380 Engine Intake Manifold for Select Buick/Chevrolet Models OE FIX

Improved design - this intake manifold has been redesigned to correct a common PCV valve failure in the original equipment design to reduce excessive....
Complete kit - this manifold includes a new throttle body gasket, port gaskets, fuel injector O-rings, MAP sensor O-ring and screws for a complete....
Quality American construction - this intake manifold is engineered and manufactured in the United States of tough nylon polymer to resist cracking and....
Related repair - this manifold often leads to failure in the valve cover's PCV diaphragm.
a damaged valve cover will often need to be replaced at the....
Ensure fit – to make sure this part fits your exact vehicle, input your make, model and trim level into the Amazon Garage.

Check Stock

MOSTPLUS 615-175 329-01780 W7Z9424AA1 Intake Manifold Compatible with Ford Crown Victoria Explorer Mustang 4.6L

【Fitment】— Compatible for 2001-08 Ford Crown Victoria Intake Manifold V8 4.6L (8th Vin Digit W) , Compatible for 2006-11 Ford Crown Victoria Intake Manifold V8 4.6L (8th Vin Digit V) , Compatible for 2001-05 Ford Crown Victoria Intake Manifold V8 4.6L (8th Vin Digit 9) , Compatible for 2002 Ford Explorer Intake Manifold V8 4.6L (8th Vin Digit W) , Compatible for 1999-04 Ford Mustang Intake Manifold V8 4.6L (8th Vin Digit X)(Detailed Apllication below).
【OEM Part Number】 — 1W7Z9424AB, 329-01780,3W7Z9424AA,3W7Z9424AD,615-175.
【Function】— The intake manifold supplies air to the cylinders of an engine. High quailty material, excellent performance, high resistance..
【High Quality】— This intake manifold is made to meet or even exceed the standard quality to help your car start normally..
【Note】— Not correct for models with coolant-heated PCV. Please check the year, make, model and trim of your vehicle in the garage before purchase..

Check Stock

Miaowa Racing Performance Intake Pipe Inlet Manifold For GX200 6.5HP OHV Engines/Predator 212cc 196cc Engines Mini Bike Go Kart

Fitment: Racing Performance Intake Pipe Inlet Manifold For GX200 6.5HP Chinese OHV Engines 196cc Clone Engines Mini Bike Go Kart.
It’s A CNC Machined Performance Manifold To Adapt To A Predator 212cc 196cc Clone Engines And 6.5HP OHV Engines.
Package Include: 1pc Mainfold + 1pc Gasket + 1set Mounting Screws.
Commitment::Please feel free to conact us if you have any question.We will reply ASAP!.

Check Stock

SPEEDER Exhaust and Intake Manifold Stud Bolt Nut Gaskets Kit Stainless Extended M8 1.25MM*50MM Compatible with Honda Acura B D H F B18 GSR 20Pcs

Exhaust manifold Stud Bolt Nut Gaskets Kit is designed compatible with Honda Acura B, C, D, F, H series engines. also works for the intake manifold.
You can also remove the gasket (exhaust manifold stud designed compatible with Ford 4.6 & 5.4 Liter V8 Engine).
Standard 304 stainless steel studs and serrated flange nuts kit is great replacement for your orginial stud and bolt that are rusted and broken.
Exhaust manifold stud nuts kit thread size, M8*1.25MM, also fit other vehicle, such as Chevrolet, GMC, Dodge and so on. Please Check and measure the lengths(50mm) and thread sizes(M8*1.25MM) needed for your specific vehicle application.
The exhaust manifold bolts and studs kit has been heat-treated for enhancing its stable performance and durability. All parts are engineered and tested to meet or exceed original standards and performance.
We value your shopping experience, If you encounter any problems in installing the exhaust manifold stud bolt nut kit, you can feel free to contact us via Amazon Mail. We provide 24-hour mail service and will help you as soon as possible.

Check Stock

615-178 Upper Intake Manifold for 1996-2000 Fo-rd Crown Victoria Thunderbird Mus-tang Lin-coln Town Car Mercury Grand Marquis Cougar V8 4.6L F8AZ9424AAA F8AZ9424CA

The primary function of the intake manifold is to distribute the inlet air or air / fuel mixture to each of the cylinders evenly so that the engine can run properly and the vehicle can move..
The most common problem with the intake manifold is a blown gasket. Since gaskets are made of steel and rubber and are relatively thin, they can break very easily. Here are some Common Signs of a Bad Intake Manifold: 1. Engine Overheating.
2. Loss in Engine Performance or Misfires.
Replacement OEM Part Numbers: 615-178 / F6SZ9424AA / F8AZ9424AAA / F8AZ9424BC / F8AZ9424CA.
Replacement for: Fo-rd: 1996-2000 Cro-wn Victoria, 1996-1998 Mus-tang, 1996-1997 Thunder-bird --- V8 4.6L, Mer-cury: 1996-2000 Grand Marquis, 1996-1997 Cougar.
Thank you for choosing our high quality parts. With the favorable price you can contact us anytime by e-mail. Please check the YEAR / MANUFACTURE / MODEL carefully under PRODUCT DESCRIPTION to make sure it fits..

Check Stock

Tektall Alloy 1\ Intake Manifold Spacer Replace for Ford GT-40 5.0 Mustang explorer Cobra 1987-1993 Durable

【Good Quality】 Tektall 1" Intake Manifold Spacer made of High quality alloy.Sturdy and durable, and has reached OEM specifications..
【Fitment】Tektall Alloy 1" Intake Manifold Spacer fit for Ford Mustang 5.0L GT-40 explorer Cobra 1987-1993 year..
【Product Dimension】 THICKNESS 1" Made of High quality alloy..
【High Performance】Tektall Intake Manifold Spacer can reduce heat transfer from the engine to the intake manifold. The result is a colder IAT (don’t forget, colder air is more dense, which means more horsepower!). The end result is increased horsepower and allowed to increase time with fewer explosions..
【Package Includes】 1 X Intake Manifold Spacer, 2 X Gaskets, 1 X Mounting Hardware kit. Please confirm the item if it matches your machine before you purchase..

Check Stock

MOTO988 Carb Joint Intake Manifold Boot For Kawasaki Bayou 250 2003-2011 Bayou 220 1988-2002

★High Quality: The main body of our Carburetor intake manifold boot is made of high-density rubber material, which has the advantages of corrosion resistance, high temperature resistance, friction resistance, longer service life, and longer service life..
★Compatible Models: The carburetor intake manifold boot work with Kawasaki ATV Bayou 250 - KLF250 2003-2011 Kawasaki ATV Bayou 220 - KLF220 1988-2002.
★Package content: You will receive these accessories after purchase: 1 x Intake Manifold Boot；1 x Gasket；2 x Screw.
★Tips: Please carefully confirm your model and whether it is within the scope of application before purchasing, please refer to the applicable type and OEM number on the page..
★After-Sales Service Guarantee: If the product you receive is defective or damaged and cannot be used, you can contact us at any time. We will try our best to solve it for you. We are committed to providing customers with the highest quality products and services as our goal..

Check Stock

BATONECO Polished Airgap Intake Manifold High Rise Dual Plane Compatible with SBC Chevy 350 400

100% NEW - Made of high-quality aluminum material, Natural Intake Finish, Package Contents: Intake Manifold..
COMPATIBILITY - Intake Manifold Compatible with Chevy Small Block SBC 350 400..
ADVANTAGE - Basic Operating RPM Range: Idle-5500.
FEATURE - intake manifolds are the perfect performance upgrades for your engine. These cast-aluminum manifolds are pressure-tested for leaks..
DESIGN - The intake manifolds feature a high-flow runner design to deliver improved power from idle to 5500 rpm..

Check Stock

Intake Manifold w/Runner Control Valve & Air Pressure Sensor Compatible with 09-17 Dodge Journey Avenger/Jeep Compass Patriot/Chrysler Sebring 1.8L 2.0L 2.4L Part# 4884495AK 4884495AH 911-902

✔ 【WORTH YOUR EVERY PENNY】 ✴ Fair price for Dodge Jeep Chrysler 1.8L/ 2.0L/ 2.4L with RUNNER CONTROL VALVE & AIR PRESSURE SENSOR + GASKETS. ✴ Fits well and high performance make your car more horsepower. ✴ Highly durable marerial to meet or exceed OE standard quality and performance requirements. ✴ The gasket with upgrade materials to ensure a perfect seal with no risk of leaking. ✴ Heat stabilized nylon providing better resistance to cold/hot cycles and further prevent any chances of cracking..
✔ 【PACKAGE】1 pcs Intake Manifold kit Includes: 1 * NEW Intake Manifold with Gasket + 1 * NEW Flow Control Valve & 1 * NEW Air Pressure Valve with Bolts and washers【NOTE】 Please reference to the first picture as shown..
✔ 【EXCAT MATCH】 Engines: 1.8L/ 2.0L/ 2.4L ✴ 2007-2010 Jeep Patriot, Jeep Compass, Dodge Caliber ✴ 2011-2017 Jeep Patriot, Jeep Compass, Dodge Caliber - 2.4L ✴ 2007-2010 Chrysler Sebring & Dodge Avenger - 2.0L 2.4L ✴ 2009-2011 Dodge Journey Engine - 1.8L, 2.0L, 2.4L (Pls check detailed fitment in the product description below.).
✔ 【OE NUMBERS】 4884495AK/ 4884495AH/ 4884495AI/ 4884495AJ/ 4884495AC/ 4884495AD/ 4884495AE/ 4884495AF/ 4884495AG/ 911-902.
✔ 【PURCHASE WITH CONFIDENCE】In BSOC AUTO Store, r....

Check Stock

Versachem 99839 Mega Black OEM Silicone - 3 oz.

High performance, high temperature, silicone gasket maker.
resists oil, water, and antifreeze mixtures.
maintains long term durability and flexibility to make formed-in-place gaskets.
Temperature Range: -100°F to 650°F (-73°C to 343°C).
Suggested Applications: Use on all engines.
make gaskets for valve covers, oil pans, intake manifold end seals, water pumps, transmission pans, cam covers, and thermostat housings.

Check Stock