Top Ls1 Intake Manifold Gasket Reviews

Gen III LS Head Gasket Kit for GM Chevy LS1 LS6 LQ4 LQ9/4.8L 5.3L 5.7L 6.0L 1997-2007 Cylinder Engine Block Valley Cover Gasket 12589226 12612350 12558178

  • ...)Front Main Crank Seal#12585673/(2)Knock Sensor Grommet# 12558177/(4)Water Block Off Gaskets#12551933/(2)LS Water Pump Gasket #12630223/(1)Front Cover Gasket#12633904/(1)Rear Main Seal Gasket#12639249/(1)Oil Pan Gasket#12612350/(2)Cylinder Head Gasket#12589226/(1)Engine Block Valley Cover Gasket#12558178/(1)Exhaust Manifold Gasket#12617944/(1)Valve Cover Gasket#12637683.
Check Stock

Intake Manifold Runner Control Motor - Compatible with 2015-2018 Hyundai Sonata 2.4L 4-Cylinder

  • Compatible with or fits: 2015 - 2018 Hyundai Sonata 2.4L 4 Cyl.
  • Direct replacement - this replacement intake manifold runner motor matches the fit and function of the original equipment motor on specified vehicle....
  • Directly replaces the original motor ~ Made of quality materials and components for long-lasting, reliable service ~ Original Equipment Quality.
  • Package Contents: 1 Engine Intake Manifold Flap Motor.
Check Stock

A-Team Performance - Fabricated Intake Manifold w/Drive By Wire 102mm EFI Throttle Body - Compatible with LS LSX LS1 LS2 LS6 Black

  • 102mm Black Intake Manifold with EFI Drive by Wire 0° Opening Throttle Body Complete with Gaskets, Hardware, Black Fuel Rails, & Fuel Crossover Line.
  • Compatible with Chevrolet Small Block V8 GEN. III/IV (LS-Based) 4.8 L / 293 in3 (LR4) 5.3 L / 325 in3 (L33, L59, LM4, LM7) 5.7 L / 346 in3 (LS1, LS6) 6.0 L / 364 in3 (LQ4, LQ9, LS2).
  • Compatible With Cathedral Port LS LSX LS1 LS2 LS6 heads.
  • Hardware - 3mm (1/8") thick T6061 Sheet Aluminum construction.
  • Durability - The intake will not bend or flex With Boost Or Vacuum.
Check Stock

FEL-PRO VS 50442 R Valve Cover Gasket Set

  • BRTEC Automotive Replacement Head Gasket Sets Package List- Head Gasket, Intake & Exhaust Manifold Gasket, Valve Cover Gasket, Viton Valve Stem Seals/ Grommets, Other O-Rings/ Seals, Other Small Gaskets, and Other Engine Sealing Kits.
  • ( Please refer to the first image to confirm the components you may receive, we always check every package before shipment, please massage us for a replacement if there are missing parts after you receiving the package )..
  • Head Gasket Part Number: ES71313, HS26181PT, HS26181PT-1, HS26181PT-3, TS2618100HBSI.
  • Check Before Purchasing - Please check the d....
Check Stock

Dorman 615-380 Engine Intake Manifold for Select Buick/Chevrolet Models OE FIX

  • Improved design - this intake manifold has been redesigned to correct a common PCV valve failure in the original equipment design to reduce excessive....
  • Complete kit - this manifold includes a new throttle body gasket, port gaskets, fuel injector O-rings, MAP sensor O-ring and screws for a complete....
  • Quality American construction - this intake manifold is engineered and manufactured in the United States of tough nylon polymer to resist cracking and....
  • Related repair - this manifold often leads to failure in the valve cover's PCV diaphragm.
  • a damaged valve cover will often need to be replaced at the....
  • Ensure fit – to make sure this part fits your exact vehicle, input your make, model and trim level into the Amazon Garage.
Check Stock

POSENG LS LS1 LS2 LS6 Intake Manifold with 102mm Throttle Body Metal Fabricated EFI 15° Throttle Opening Compatible with Chevrolet Corvette Chevy SSR Cadillac CTS Pontiac GTO Firebird Saab 9-7X

  • 1.APPLICATION: For Cathedral Port LS1/LS2/LS6 Heads (for LS 4 bolt intake with cable drive only, not for drive by wire).For Specific Model Compatibility, please check the model list in the description.
  • 2.COMPATIBLE WITH: 1997-2004 Chevrolet Corvette.
  • 1998-2002 Pontiac Firebird Formula, Trans AM.
  • 3.NOTE: This intake manifold works well with 102mm Throttle Body, it can also work with 92mm throttle body (May be loose)..
  • 4.ROBUST PERFORMANCE: Made of 3MM thickness T6061 Sheet Aluminum, stay stable as always..
  • 5.PACKAGE INCLUDES: Intake manifold without rear map sensor port, 92mm throttle body, throttle position sensor (tps), gaskets, hardware, fuel rails, fuel crossover line.Injector not included..
Check Stock

JEGS Small Block Chevy Vortec Cast Iron Cylinder Head | Made In USA | 1 Per Package | Straight Spark Plug | 1.94” Intake / 1.5” Exhaust Valve | 170cc Intake Ports | .475” Max Lift

  • FITS ALL 1955-Present GM small blocks except LT1, LT4, and LS1-style engines.
  • UTILIZES FAST BURN COMBUSTION CHAMBERS and high-velocity intake and exhaust ports.
  • PERFORMS GREAT RIGHT OUT OF THE BOX and can be mildly ported and milled up to 0.040 inch.
  • REQUIRES A VORTEC-STYLE INTAKE MANIFOLD to complete installation.
  • SPECIFICATIONS: 1.94” intake / 1.5” exhaust valve, 170cc intake ports, .475” max lift, straight spark plug design, 3/8 “ rocker arm studs, 64cc combustion chambers, 1.25” valve springs.
Check Stock

Vortech 4GX218-150L V-3 Si-Trim EFI Truck LS-Engine Swap Supercharger Kit

  • For use with 1999-2013 GM Truck Front Engine Accessory Drive (Not....
  • Tuner Kit (Fuel & Tuning Components Not....
Check Stock

MOTO988 Carb Joint Intake Manifold Boot For Kawasaki Bayou 250 2003-2011 Bayou 220 1988-2002

  • ★High Quality: The main body of our Carburetor intake manifold boot is made of high-density rubber material, which has the advantages of corrosion resistance, high temperature resistance, friction resistance, longer service life, and longer service life..
  • ★Compatible Models: The carburetor intake manifold boot work with Kawasaki ATV Bayou 250 - KLF250 2003-2011 Kawasaki ATV Bayou 220 - KLF220 1988-2002.
  • ★Package content: You will receive these accessories after purchase: 1 x Intake Manifold Boot；1 x Gasket；2 x Screw.
  • ★Tips: Please carefully confirm your model and whether it is within the scope of application before purchasing, please refer to the applicable type and OEM number on the page..
  • ★After-Sales Service Guarantee: If the product you receive is defective or damaged and cannot be used, you can contact us at any time. We will try our best to solve it for you. We are committed to providing customers with the highest quality products and services as our goal..
Check Stock

Mid Valley - 102mm Intake Manifold & Throttle Body For Cathedral Port Heads LS1/LS2/LS6 LS Based Engines Fits Chevrolet Corvette Chevy SSR Cadillac CTS Pontiac GTO Firebird Saab 9-7X

  • Fits LS Based Engines with Cathedral Port Heads LS1/LS2/LS6 heads 6.0L 5.6L 5.3L 4.8L)Chevrolet Small Block V8 GEN. III/IV(LS-Based)4.8L / 293 CI (LR4).
  • Fits 1997-2004 Chevrolet Corvette , 1998-2002 Pontiac Firebird Formula, Trans AM , 2001-2004 Corvette Z06 , 2004-2005 Cadillac CTS V-series, 2005-2007 Chevrolet Corvette ,2005-2006 Chevrolet SSR ,2006-2009 Chevrolet TrailBlazer SS , 2006-2007 Cadillac CTS V-Series,2005-2006 Pontiac GTO,2008-2009 Saab 9-7X Aero.
  • Package including:Intake Manifold, 102mm Throttle Body, Gaskets, Hardware, Fuel Rails, Fuel Crossover Line. Extra Spacer on throttle body has been included ..
  • Intake Manifold Height: 9.00 inches (approx. 3 inches higher than stock).
  • Fabrication by Tig Welded Aluminum .One year warranty available..
Check Stock

5.3L AFM DOD Replacement Kit Lifters Camshaft Head Gaskets for 2005-2014 Buick Chevy Avalanche Silverado Suburban Tahoe Trailblazer Envoy Sierra Yukon V8

  • 5.3 overhaul kit include: multiple layers steel (MLS) head gasket, valve cover gasket, valve stem seals, intake manifold gasket, exhaust manifold gasket, front camshaft seal, o-rings, other small gaskets, 30 cylinder head bolts (20 long bolts: 100mm, 10 small bolts: 45mm), 8 AFM (active fuel management) hydraulic roller lifters, 8 NON-AFM hydraulic roller lifters, 4 AFM lifter tray w/ bolts, replacement dod camshaft (single bolt).
  • AFM kit fit for 2005-2007 Buick Rainier 5.3l V8, for 2005-2006 Isuzu Ascender 5.3l V8, for 2005-2009 Saab 9-7x 5.3l V8.
  • 5.3 head gasket kit for 2007-2013 Chevrolet Avalanche 5.3l V8, for 2007-2009 Chevrolet Avalanche 5.3l V8, for 2007 Chevrolet Silverado 1500 Classic 5.3l V8, for 2005-2013 Chevrolet Silverado 1500 5.3l V8, for 2007-2014 Chevrolet Suburban 1500 5.3l V8, for 2007-2014 Chevrolet Tahoe 5.3l V8, for 2005-2008 Chevrolet Trailblazer 5.3l V8.
  • AFM lifter and camshaft for 2005-2006 GMC Envoy Xl 5.3l V8, for 2005 GMC Envoy Xuv 5.3l V8, for 2005-2009 GMC Envoy 5.3l V8, for 2007 GMC Sierra 1500 Classic 5.3l V8, for 2005-2013 GMC Sierra 1500 5.3l V8, for 2010-2013 GMC Sierra 5.3l V8, for 2007-2....
Check Stock

A-Team Performance - Intake Manifold 102mm Throttle Body Sheet Metal Fabricated EFI 15° Throttle Opening - Compatible with Chevrolet GMC Pontiac LS LS1 LS2 LS6 Silver

  • Silver Intake Manifold 102mm Throttle Body Sheet Metal Fabricated EFI 15° Throttle Opening.
  • Compatible with Chevrolet Chevy GMC Pontiac Cathedral Port LS1/LS2/LS6 Heads.
  • Drive by Cable Throttle Body - 102mm Bore Throttle Body Openings.
  • 3mm (1/8") Thick T6061 Sheet Aluminum Construction the Intake Will Not Bend or Flex With Boost or Vacuum.
Check Stock

E1840P Sloppy Mechanics Stage 2 Camshaft LS7 Lifter 1218 Valve Spring Head Gaskets Bolts Kit for 1997-2007 LS LS1 5.3L 5.7L Engine

  • Cam and lifter kit include: 1 intake seal set, 1 timing cover gasket set, 1 valley cover gasket, 1 oil pan gasket, 2 exhaust manifold gaskets, 1 rear main seal, 1 rear main cover gasket, 2 multilayer steel cylinder head gaskets, 30 cylinder head bolts, 16 ls7 valve lifters, 16 beehive valve springs, 1 e-1840-p camshaft.
  • E1840P camshaft kit fit for 1997-2007 GM Chevy LS L92 L99 5.3L 5.7L V8 LSx Sloppy Stage 2.
  • 16pcs valve springs: outside diameter of outer spring (in): 1.290 in.
  • inside diameter of outer spring (in): 0.885 in.
  • We offer you a 12-month warranty. Any problems, just contact us through email, we ....
Check Stock