Top Barbed O ring Fittings Reviews

iMopo 70 Pack Drip Irrigation Universal 1/4 Barbed End Plug Fittings Barbed Connectors for Drip or Sprinkler System

【Great Value】：Comes with 70 pieces barbed end plug fittings in total,enough to meet your daily use..
【DURABLE MATERIAL】：Made of high-impact,UV-resistant and chemical-resistant materials,durable and reliable to assure a long life using time..
【BARBED DESIGN】：Barbed end plug fittings tight fits universal 1/4" drip tubing,barbed design ensures the tubing will not slip and leak..
【EASY TO INSTALL】:Barbed end plug fitting is easy to be installed without glue, tools, or clamps.Push the tubing firmly over the end plug fitting.Warm tips:Put the tubing end into 75°~85° hot water 10 seconds before pushing them..
【FOR WIDE APPLICATIONS】:Barbed end plug fittings are Great for use with raised garden beds,lawn,greenhouse gardening and agricultural watering applications..

Check Stock

US Cargo Control Enclosed Utility Trailer E Track Starter Kit, Convenient E Track Kit Includes E Track Rails, Cargo Straps, Fittings, End Caps and Storage Bag, Easily Secure Cargo in Your Trailer

CONVENIENT TRAILER E TRACK KIT - This kit includes everything you need to get you started with your E Track System! The kit includes E Track Rails, Ratchet Straps, E Track Fittings with O-Ring, J Hook Fittings, End Caps and a storage bag!.
EASY TO USE - The included Cargo Straps, O-Ring Tie Downs, J-Hook Fittings, and Storage Bag all have E-Fittings which makes it easy to snap them in and out of the E Track Rails so you can customize your setup depending on what you are hauling..
BUILT TO LAST - Our E Track Rails, Cargo Straps, and E Track Accessories are made from high-quality materials such as galvanized steel and 6,000 lbs polyester webbing. They're strong and durablE - so you can secure your cargo with confidence..
KIT INCLUDES - (4) 5' Horizontal E Track Rails, (8) Plastic End Caps, (6) Straps (12', 16' and 20', 2 each), (4) O-Ring Fittings, (2) 2" J Hook Fittings, (2) 4.5" J Hook Fittings and (1) Storage Bag. NOTE: Hardware to fasten the Track not included..
SPECS - E Track Rails Made of 12-gauge Galvanized Steel | Cargo Straps Working Load Limit (WLL): 1,467 lbs. |....

Check Stock

DEWALT 20V Pro Press Tool For Copper Pipe and Stainless Steel Pipes, Plumbing, ½”-1 ¼”, Includes Crimping Head, 2 Batteries and Charger Included (DCE200M2K)

DIY: Perfect kit for the home-owner or the professional looking to get started with PEX plumbing bundle. Save time looking for all parts needed to get the job done..
HIGH QUALITY: Comes with great PEX tools that makes it comfortable and easy to work with. It also has the ability to work in hard to reach tight spaces. Compatible with PEX piping system..
TOOLS: 1x PEX Crimper Tool With Lock Hook.
1x PEX Scissor Shear Cutter Tool - Spring-Loaded Handle, Lock Hook & Convenient Carrying Case.
FITTINGS: Lead Free Brass Barbed 1/2 inch 90-Degree Elbow Fittings (Bag of 25) + Lead Free Brass Barbed 1/2 inch Straight Coupling Fittings (Bag of 25).
TUBING & CLAMPS:1/2 Inch Blue Pex Tubing 100 Feet Coil + 1/2 Inch Red Pex Tubing 100 Feet Coil, Stainless Steel half inch Cinch Clamp Rings (Bag of 100) + Half Clamp with Nail (Bag of 100).

Check Stock

iCrimp Pex Pipe Crimping Tool kit for 3/8,1/2,3/4,1-inch Copper Ring with Free Gauge&Pex Pipe Cutter -Meet ASTM F1807 and Portable

DIY: Perfect kit for the home-owner or the professional looking to get started with PEX plumbing bundle. Save time looking for all parts needed to get the job done..
HIGH QUALITY: Comes with great PEX tools that makes it comfortable and easy to work with. It also has the ability to work in hard to reach tight spaces. Compatible with PEX piping system..
TOOLS: 1x PEX Crimper Tool With Lock Hook.
1x PEX Scissor Shear Cutter Tool - Spring-Loaded Handle, Lock Hook & Convenient Carrying Case.
FITTINGS: Lead Free Brass Barbed 1/2 inch 90-Degree Elbow Fittings (Bag of 25) + Lead Free Brass Barbed 1/2 inch Straight Coupling Fittings (Bag of 25).
TUBING & CLAMPS:1/2 Inch Blue Pex Tubing 100 Feet Coil + 1/2 Inch Red Pex Tubing 100 Feet Coil, Stainless Steel half inch Cinch Clamp Rings (Bag of 100) + Half Clamp with Nail (Bag of 100).

Check Stock

PIILOO High Pressure Oil Pump HPOP Master Service Kit with O-Ring Seals & Base Gasket Compatible with Ford Powerstroke 7.3L 1994-2003 and Navistar DT466 & T444E 1995-2004

APPLICATION–Perfectly compatible with Ford Powerstroke 7.3L 1994-2003 and Navistar DT466 & T444E 1995-2004. (Part Numbers ISK635, ISK617, ISK795, and TL3).
MATERIAL–High quality rubber material o-rings seal and high standard fittings and gaskets, durability, anti-wear, anti-tear, leakproof, corrosion resistance, and longer service life..
FUNCTION–A complete tool kit prevents oil leakage and help replace all seals and o-rings on the high-pressure oil pump, and reinstall the pump correctly..
KIT CONTAINS–2-Discharge port O-rings / 1-Rear Port Plug O-ring / 1-Non-Serviceable Port O-Ring / 1-IPR Valve O-Ring / 1-IPR Nut / 1-Fill Plug O-Ring/ 1-Non-serviceable port long threaded repair plug / 1-Replacement Check Ball / 1-5ml Thread Sealer / 2-Diesel High Pressure Oil Pump STC Fittings / 1-STC Quick Disconnect Tool / 1-High Pressure Oil Pump Mounting Gasket..
SATISFACTION–Goupgo offer 100% brand new and high quality High Pressure Oil Pump Service Kit to every customer. If you are not satisfied with the item, simply return it for a full refund within 30 days. Don’t hesitate to contact us if you have any questions..

Check Stock

Hydrofarm Active Aqua DRM58T 55 Gallon Drum Hydroponic Reservoir with Pre-Drilled Holes Cover Lid and Bolt Ring Closure, Black

HYDROPONIC RESERVOIR: This Hydrofarm 55-gallon drum is perfect for use as a reservoir for larger hydroponic systems.
HIGH QUALITY: High quality 55-gallon drum that comes with a pre-drilled cover and bolt ring closure.
DESIGN: Pre-drilled holes can be used for the grommets and barbed fittings necessary to outfit the drum with tubing for filling and draining.
MODIFIABLE LID: A larger hole can also be cut in the lid to act as a port for adding nutrients, checking pH, etc..
SIZE: Dimensions (L x W x H): 22 x 22 x 35.5 inches.
The solid lid can be drilled for the grommets and barbed fittings necessary to outfit the drum with tubing for filling and draining.

Check Stock

10Pcs Propane Tank Gasket and 10Pcs O-Rings for All Soft Nose P.O.L. Fittings, Soft Rubber Leakage-Proof Sealing, Fit for Propane Gas Adapters, Connectors, Valves, Regulators, Accessories and More

[WHAT YOU GET] You will get 10 pieces of Propane Tank Gasket and 10 pieces of O-Rings for All Soft Nose P.O.L. Fittings..
[MONEY-SAVING PROPANE ACCESSORIES] - Propane leakage preventing washers can avoid thread sealing leakage. If the seal ring worn, aged or compressed, there would cause a dangerous gas leak. Just change to new washers, there would be no more gas leak. Save much money on buying new gears and we can have a safe cooking or grill with our old equipment..
[Propane tank Gaskets] The Propane tank Gaskets can prevent leakage on propane tank connectors, valves, Regulators, adapters, fittings. Outer Diameter 0.716inch(18.2mm), inner diameter 0.394inch(10mm), and Thickness 0.12inch(3.0mm). Ensure replacement O-rings are in same size with your stock gasket..
[SOFT NOSE O-RING] - Replacement Part for Soft Nose O-Ring on Propane P.O.L. Fittings. Suitable for propane adapters, pipe connectors, elbow sealing material, cold and hot water pressure. Approximate size OD 0.587 inch or 14.9mm, ID 0.4 Inch or 10.1 mm, Thickness 0.1 inch 2.5 mm..
[DURABLE AND STURDY] Made of high-quality Soft Rubber, all the seal rings are durable and sturdy for long time usage..

Check Stock

Pexflow PXKT10012 Starter Kit for 1/2-In Pex with Crimper & Cutter Tools - Set includes Brass Elbow & Coupling Fittings, Cinch Clamps, Half Clamps, and 2 Rolls of 1/2-In X 100ft PEX Tubing

DIY: Perfect kit for the home-owner or the professional looking to get started with PEX plumbing bundle. Save time looking for all parts needed to get the job done..
HIGH QUALITY: Comes with great PEX tools that makes it comfortable and easy to work with. It also has the ability to work in hard to reach tight spaces. Compatible with PEX piping system..
TOOLS: 1x PEX Crimper Tool With Lock Hook.
1x PEX Scissor Shear Cutter Tool - Spring-Loaded Handle, Lock Hook & Convenient Carrying Case.
FITTINGS: Lead Free Brass Barbed 1/2 inch 90-Degree Elbow Fittings (Bag of 25) + Lead Free Brass Barbed 1/2 inch Straight Coupling Fittings (Bag of 25).
TUBING & CLAMPS:1/2 Inch Blue Pex Tubing 100 Feet Coil + 1/2 Inch Red Pex Tubing 100 Feet Coil, Stainless Steel half inch Cinch Clamp Rings (Bag of 100) + Half Clamp with Nail (Bag of 100).

Check Stock

228 Buna-N O-Ring, 50A Durometer, Round, Black, 2-1/4\ ID, 2-1/2\ OD, 1/8\ Width (Pack of 10)

O-RING ASSORTMENT KIT: NEIKO introduces our Rubber O-Ring Assortment Set. Each O-ring acts as a joint gasket to seal and protect water lines in any oil line, faucet, sink, filter, toilet, or other machinery..
VERSATILE & RELIABLE: Thanks to the NBR construction, these O-rings are resistant to water, UV, lubricants, hydraulic fluids, gasoline, alkalis, and grease. Each O-ring creates a long-lasting seal system that protects your devices from leaks..
DURABLE O-RING KIT: Each O-ring in this 270-piece set is built for long-lasting use with static and dynamic motion cylinder fittings. The rings are made of commercial-grade nitrile butadiene rubber for liquid resistance..
COMPACT SIZE: Our O-ring kit comes organized in a case by ring size and shape. Carry this seal tool set with you wherever you’ve got a leak that needs extra sealing protection, and be ready to repair against water leaks and other liquids..
WHAT’S INCLUDED: This rubber O-ring set includes 18 common small and large SAE and metric sizes for a range of home, hydraulic, industrial, and pneumatic applications. A sturdy plastic case is included..

Check Stock

Steel Power Steering Box Adapter Fitting 18mm-1.5 IFM/-6 AN, 80-Up GM

This adapter fitting is commonly used to adapt power steering boxes to AN 6 connections.
18 mm-1.5 O-ring seal on one end and AN6 male on the other.
Inverted flare fittings are used on most GM power steering boxes 1977 and older.
Metric thread O-ring fittings are used on later model GM power steering boxes 1978 and newer.

Check Stock

Steel Power Steering Box Adapter Fitting 14mm-1.5 IFM/-6 AN, 80-Up GM

This adapter fitting is commonly used to adapt power steering boxes to AN 6 connections.
14 mm-1.5 O-ring seal on one end and AN6 male on the other.
Inverted flare fittings are used on most GM power steering boxes 1977 and older.
Metric thread O-ring fittings are used on later model GM power steering boxes 1978 and newer.

Check Stock

Captain O-Ring BOSS Hydraulic SAE 900 O-Ring Seal Kit (Buna-N 70-255 Piece Kit)

Includes high quality BN70 (Buna Nitrile 70 durometer) o-rings - the most common o-ring material.
Used in sealing straight thread tube fittings (BOSS Type) in hydraulic equipment.
O-Rings are conveniently sorted by size in individual compartments..
Assembled in the USA. Manufactured and Warrantied by Captain O-Ring LLC, with decades in a sealing and chemical industry.

Check Stock

Precision 40mm Wastegate Outlet Flange Discharge Dump

Fits any 40mm Standard V-Band Wastegate Port.
Stainless Steel Weldable Flange Inlet / Outlet Flanges.
Easy to Remove Locking Collar for Fast Spring Changes.

Check Stock