Top Polypropylene Barbed Fittings Reviews

Metaland 3/8 Hose Barb Elbow Plastic 90 Degree L Right Angle Barbed Fitting Pack of 6

√【Material】100% PP polypropylene plastic, better then PVDF. Lead free, durable, safety for potable drinking..
√【Size】3/8" Hose Barb, suitable for 3/8" ID hoses or tubings..
√【Quantity】Package including 6PCS plastic barbed fittings..
√【Working Temperature&Pressure】Temperature range from -120 to +280 degrees F, Maximum working pressure of 150 psi..
√【Application】Suitable for pharmaceutical,fooand beverage,laboratory,chemical processing and handing,and printing and labeling..

Check Stock

PVC Barbed Tee Fitting - 3/4 PVC Tee Barb Fitting - 3/4 Inch Barbed Insert Tee - Hose Barb Fittings for Tubing Hose Water Line - SCH 40 Barbed Hose Tee Fitting – Barbed Tee PVC Fitting

TOP QUALITY: The water line barbed fitting tees are carefully manufactured under strict quality guidelines and in full compliance with ASTM. Only the highest-grade PVC materials are used offering you the best durability.
MEASUREMENTS: 3/4 Inch barbed Insert x 3/4 Inch barbed Insert x 3/4 Inch barbed Insert barbed tee. Pipe Fitting Class is Sch 40 with Max. Temp of 140 F. Max Pressure 200 psi @ 72 Degrees F. Tee Fitting Connection Type is Insert x Insert x Insert.
WIDE APPLICATION: PVC Barb Tee Fitting can be used for running water lines as flexible tube and hose fittings at home, RV or any commercial plumbing systems.
EASY TO INSTALL: PVC tee hose fittings are lightweight and require no professional knowledge. The fitting process is simple and effortless. PVC can be cut, shaped, welded and joined easily.
MADE IN USA: Our PVC hose connectors are produced in US and have clear environmental advantages over traditional materials - 100% recyclable with increased wear resistance.

Check Stock

300Pcs Barbed Connectors Irrigation Fittings Kit HOINCO Drip Irrigation Barbed Connectors for 1/4 Inch Tube for Flower Pot Garden Lawn Elbows End Plug Straight Barbs Tees 4-Way Coupling

【Barbed Connectors Irrigation Fittings Kit】：300Pcs irrigation kits total, including 100Pcs straight barbs, 80Pcs tees, 40Pcs oblique barbed elbows fittings, 40Pcs end plug, 40Pcs 4-way coupling. Drip irrigation connectors can save the water needed for irrigation in an efficient way and easily pass water to anywhere, bringing more convenience for your life..
【Drip Irrigation Barbed Connectors 】：Drip irrigation barbed connectors are made of high-strength plastic, which has a long service life and is not easy to fold and deform. The sufficient quantity is enough for your daily use and replacement..
【Suitable Size】：These irrigation kits are designed with barbs and can be used to connect 1/4 inch drip irrigation pipes. (Suitable for 4mm ID 7mm OD tube). Our drip irrigation accessories help to build a practical and useful irrigation system. Please check the size carefully before purchasing..
【Easy to Install】：Directly insert the irrigation fittings kit at the end of the pipe, without tools or glue, making gardening more convenient and efficiently. If convenient, you can also use a heat gun or hair dryer to soften the end of the tubing before inserting..
【Wide Applications】：Suitable for gardens, patio, lawn, flower beds, terra....

Check Stock

Northern Brewer - Silver Serpent Stainless Steel Immersion Wort Chiller

A simple tweak, adding barbed fittings and a drop-angle to our favorite immersion chiller, spawns a new best-in-class product. Introducing Silver....
Simply drop your clean chiller into the kettle a few minutes before the end of the boil and it will be ready to go..
Brew with peace of mind like never before. Drop-angle connections keep surprise leaks outside your kettle and away from cooling wort..
Standard garden hose connection allows for brewing outside or connects to a laundry sink faucet as your chilling water source..
Comes fully assembled with tubing, barbed fittings, and hose clamps..

Check Stock

Brass 1/4 Barb X 1/4 NPT Male End Air Hose Pipe Fitting Threaded Connector Adapter Pack of 12

✅ Function -- Barb head for connecting hoses, NPT end used to connect NPT pipes. Air hose pipe can apply to water, gas, oil and fuel as well as air tools..
✅ Premium material -- Brass barbed hose fitting is made of high quality solid brass, firm and durable, providing high resistance to abrasion and corrosion. Solid brass hose barb can withstand up to 100 °C (212 °F)..
✅ Durable -- Air hose fittings is not a cast product and has a thick wall, providing a longer service life than iron and iron galvanized pipe fittings..
✅ Superior threads -- Deeper and smoother threads with barbed edges provide effective connection..
✅ CUSTOMER SERVICE -- Professional factories produce brass air line fittings. Every detail reflects a strong texture performance. Fast Delivery and 30 Days Free Refund..

Check Stock

ANPTGHT Hose Barb Fitting Elbow 3/8 Hose Barb x 1/2 Male NPT Barbed Adapter for Fuel Gas Liquid Air Pack of 5

【Material】Plastic barb connector, made of high-quality PP（Polypropylene） material.
【Size】3/8" Hose Barb x 1/2" Male Male thread..
【Usage】Plastic hose barb can be easily connected with tubing hose line and female thread..
【Advantage】 Barbed fittings can be used with PVC, PU, Rubber hose or tubing Easy to install and not easy to drop off, good strength and durability..
【Wide range of use】Suitable for applications in pharmaceutical, food and beverage, laboratory and others..

Check Stock

50 Pcs Drip Irrigation Coupling Fittings 1/4 Drip Irrigation Tubing Straight Coupling/Single Barbed Connectors for Universal 1/4 Inch Irrigation Tubing

✔【High Quality】: Made of high-impact, high-strength plastic material, Durable, strong, water resistant.
✔【Fits 1/4 inch irrigation hose】: This irrigation straight coupling connectors connect two sections of any brand 1/4" drip irrigation tubing in a straight line. Two barbed ends makes the connection more strong and firm. Kindly Note:Please check the size carefully before purchasing..
✔【Easy to Install】: This coupling fittings for 1/4 inch irrigation tubing is easy to be installed without glue, tools, or clamps. Push the tubing firmly over the tee fitting.Tips:Put the tubing end into 75°~80° hot water for 30 seconds before pushing them..
✔【Wide Application】:This drip irrigation single barbed connector for 1/4 inch irrigation tubing helps to build a maintenance-free irrigation system, it is ideal to be applied for garden, greenhouse, flower bed, patio and other agricultural watering system..
✔【 Package Included】: 50 pieces of 1/4 inch barbed straight coupling fittings connectors are included in..

Check Stock

ANPTGHT 3/8 Tee Fitting Equal Barb 3 Way Hose Barb Fitting，Splicer Joint Mender Adapter Union Fitting for Fuel Gas Liquid Air Pack of 5

【Material】 Plastic barb connector, made of high-quality PP（Polypropylene）material.
【Size】Can be connected with 3/8" Hose ID..
【Compatible】Plastic barbed fittings can be used with PVC, PU, Rubber hose or tubing..
【Applicability】 It can withstand 125 psi (70°F) pressure and temperatures from -9°F to 175°F, but it is not resistant to oil.
【Use】Suitable for applications in pharmaceutical, food and beverage, laboratory, chemical processing and handing, and printing and labeling..

Check Stock

Hose Barb Fitting Plastic Barb Joint Splicer Mender Adapter Union for Pipe Air Line,5/32 x5/32 ,3/16 x3/16 ,7/32 x7/32 ,1/4 x1/4 ,5/16 x5/16 ,3/8 x3/8 ,7/16 x7/16 ,1/2 x1/2 ,5/8 x5/8 ,3/4 x3/4 ,50Pcs

...x7/32", 5pcs 1/4"x1/4", 5pcs 5/16"x5/16", 5pcs 3/8"x3/8", 5pcs 7/16"x7/16", 5pcs 1/2"x1/2", 5pcs 5/8"x5/8", 5pcs 3/4"x3/4".Almost all sizes are included to meet different diameter pipes..
【Material】The 3/4"x3/4" barbed hose fittings are made of milky white PE (polyethylene) plastic, and the others are made of PP polypropylene plastic, they are durable, strong, water resistant, chemical-resistant materials to assure long life..
【Working Temperature & Pressure】 1. Translucent PP (polypropylene) temperature range: -22 °F to 284 °F. It is resistant to corrosion by acid, alkali, salt solution and various organic solvents below 176 °F, and can be decomposed under high temperature and oxidation. The melting point is 329 °F, and it softens at about 311 °F. 2. Milky white PE (polyethylene) temperature range: -76 °F to 197.6 °F. Melting point is 233.6°F..
【Easy Installation】 Barb hose is easy to install without glue, or other tools required. Barbed ends grab the tubing tightly that won't leak.
If necessary, you can use a heat gun or blower to soften the end of the tube before inserting it, after cooling, the tube will remain tight..
【Wide Application】 Pipe connectors Suitable for applications in pharmaceutical, food and beverage, labora....

Check Stock

ANPTGHT 1/2\ Hose Barb 90 Degree Elbow L Fitting, Equal Barbed Joint Splicer Mender Adapter Union Adapter for Boat Aquarium Fuel Gas Liquid Air (Pack of 5)

【Material】 Plastic barb connector, made of high-quality PP（Polypropylene） material.
【Size】Can be connected with 1/2" Hose ID.
【Compatible】Plastic barbed fittings can be used with PVC, PU, Rubber hose or tubing..
【Applicability】 It can withstand 125 psi (70°F) pressure and temperatures from -9°F to 175°F, but it is not resistant to oil.
【Use】Suitable for applications in pharmaceutical, food and beverage, laboratory, chemical processing and handing, and printing and labeling..

Check Stock

Mudder 100 Pieces 1/4 Inch Straight Barbed Connectors Fitting Drip Irrigation Barbed Coupling Single Barbed Connector for Irrigation Tubing System and Garden

Wide range of applications: drip irrigation single barbed connector works well in connecting 2 sections of 1/4 inch mm tubing to direct water to another location, which can be applied for drip irrigation tubing system, flower beds, vegetable gardens, herbs gardens.
How to install: just easily install the barbed coupling fitting by push the tubing firmly over the barbed part for a tight fit, not easy to fall off, which has strong holding power with barbed ends, making the connection more firm.
No need for glues or tools: after fully inserting straight barbed connectors at the ends of the water pipe, you don't have to use any glue, tools, or clamps to fix the drippers or nozzles, garden work can be much easier and more relaxing.
Long term to use: made of quality plastic, this drip irrigation barbed coupling is water and rust resistant, not easy to fade or deform, sturdy and durable to use, which can work as practical fitting for your drip irrigation tubing system for a long time.
Sufficient quantity: 1 package comes with 100 pieces of 1/4 inch single barbed connectors, sufficient quantity to use or take as backup, sharing some with close people in your life will also be nice, they are practical fittings for tubing.

Check Stock

EcoPlus Eco 185 Water Pump Fixed Flow Submersible Or Inline For Aquariums Ponds Fountains & Hydroponics - UL Listed 158 GPH Black

Included fittings: . 75" Barbed x . 625" Threaded, two-. 5" Barbed x . 625" Threaded and . 375" Barbed x . 625" Threaded.
Suitable for installation on dry land for in-line use or submersibly into the water.
Suitable for use in hydroponic systems, ponds, fresh and saltwater aquariums, fountains and filter systems.

Check Stock

Habitech Irrigation Fittings Kit for 1/2 Tubing - 20 Piece Set - 6 Tees 6 Couplings 2 Elbows 6 End Cap Plugs - Barbed Connectors For Rain Bird And Compatible Drip or Sprinkler Systems

Use these durable irrigation fittings to your connect 1/2" drip irrigation tubing. This 20-piece kit includes 6 tees, 6 couplings, 2 elbows and 6....
These 17mm barbed fittings work with half inch drip tubing from 0.560 to 0.600 Inside Diameter (ID). Compatible with many types of Rainbird, Orbit,....
The go-to fitting option for most contractors will always be the standard 17mm barbed insert fitting. These 17mm drip fittings are made with....
Save money and time buying everything you need at once in this 20-Piece Set. Jumpstart your drip irrigation system installation with this set of....
Easy and secure installation without glue, tools, or clamps. Simply push the tubing firmly over the barbs for a very tight fit that won't leak. If....

Check Stock