Top O ring Fittings Reviews

Steel Power Steering Box Adapter Fitting 14mm-1.5 IFM/-6 AN, 80-Up GM

This adapter fitting is commonly used to adapt power steering boxes to AN 6 connections.
14 mm-1.5 O-ring seal on one end and AN6 male on the other.
Inverted flare fittings are used on most GM power steering boxes 1977 and older.
Metric thread O-ring fittings are used on later model GM power steering boxes 1978 and newer.

Includes high quality BN70 (Buna Nitrile 70 durometer) o-rings - the most common o-ring material.
Used in sealing straight thread tube fittings (BOSS Type) in hydraulic equipment.
O-Rings are conveniently sorted by size in individual compartments..
Assembled in the USA. Manufactured and Warrantied by Captain O-Ring LLC, with decades in a sealing and chemical industry.

【WIDE APPLICATION】Nitrile Rubber O-ring kit for faucet plumbing, high pressure washer, water hose nozzles or pipe fittings, sinks, filters, hydraulics fluid, auto engines, machinery bearings, pumps, boats, oils, gas control valves, spray, air kitchen bathroom water fitting seal leak repair..
【MULTIPLE SIDES】Assorted rubber washer gasket oring set in 24 different size with OD of 6mm, 6.5mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 20mm, 21mm, 22mm, 23mm, 24mm, 25mm, 26mm, 27mm, 28mm. Have thickness of 1.5mm, 2.4mm, 3.1mm. Those size could meet most daily needs.
【HIGH QUALITY RUBBER】Black o rings set are made of high quality nitrile rubber. It has high force pressure over 30kg. The working temperature range is from -55 to 150℃(-131°F to 302°F).
The black o ring kit also has good characteristic on oil resist, wear resist and cause no leak after applying to the fittings.
【TOOLS INCLUDED】Rubber O Rings Kits comes with 4 piece pick hook set, 1-piece straight pick, 1-piece 45 degree pick.
1-piece 90 degree pick, 1 pieces full hook. These 4 types tools could be used in different situation and some not easy going position to do the replacement for the o rings.
【CONVENIET STORAGE】The 24 sizes different o ....

Barbed male-to-male 1/4 inch O-ring Fitting for hose-to-valve.
Made with medical grade nylon and nitrile o-ring. Mates to specifically-designed female fittings.
For use with 1/4 Inch (6.35 mm) inside diameter hose.
Allows you to maintain vacuum within the cylinder/cup when disconnected.
Specially design to fit LeLuv/Eyro brand cylinders and fittings with 100% guarantee. We do not guarantee that the item(s) will fit any other brands..

Barbed male-to-male 1/4 inch O-ring Fitting for hose-to-valve.
Made with medical grade nylon and nitrile o-ring. Mates to specifically-designed female fittings.
For use with 1/4 Inch (6.35 mm) inside diameter hose.
Allows you to maintain vacuum within the cylinder/cup when disconnected.
Specially design to fit LeLuv/Eyro brand cylinders and fittings with 100% guarantee. We do not guarantee that the item(s) will fit any other brands..

★High Pressure Oil Pump Master Service Kit includes all the components you need to replace all seals and O-rings on your high-pressure oil pump and correctly reinstall the pump..
★Comes with many components you won’t find in other HPOP seal kits on the market today.
★Suitable for 1994-2003 Powerstroke 7.3L Diesel and 1995-2004 Navistar DT466 & T444E.
★Package Include:2- Discharge port O-Rings,1- Rear Port Plug O-Ring,1- Non- Serviceable Port O-Ring,1- IPR Valve O-Ring,1- IPR Nut,1- Fill Plug O-Ring,1- Non-serviceable port long threaded repair plug,1- Set of Repair instructions,2- Diesel High Pressure Oil Pump STC Fittings,1- STC Quick Disconnect Tool,1- High Pressure Oil Pump Mounting Gasket.
★100% satisfaction：If you are not satisfied with our High Pressure Oil Pump Master Service Kit ,please contact us,we will try our best to solve your problem..

Universal hose kit for connecting power steering pump to gear box or rack and pinion, and returning to reservoir.
Suitable for most GM vehicles from 1950-2000.
Fittings include 1- straight hose end, 2- M16-1.5 o-ring, 2- 5/8"-18 inverted flare, 1- M14-1.5 o-ring, 1- M18-1.5 o-ring, 1- 1/2"-20 inverted flare, 1- 11/16"-18 inverted flare, 3- 90 degree hose ends.
1 year warranty for it.If you have any problem ,please contact us and we will respond you on 24 hours.

Considerable amount：20 pieces replacement o-rings sealing ring and 10 pieces garden hose washers rubber washers seals spares kit.
The O-ring size: outside diameter: 17.1 mm.
Designed fitting for 3/ 8 inch quick connect.
Garden hose washer size: outside diameter: 1 inches/ 25 mm, inside diameter: 5/ 8 inches/ 16 mm.
Fit all standard 3/ 4 inch standard garden hose fittings, hose thread connections.
Water saving: save water by reducing your leaks due to worn washers and O rings, and simply use one to replace any cracked or leaking washer to fix leaks at hose connections.
Good quality NBR rubber: resists most types of weather: hot, cold, freezing, hardening, and cracking.

1-piece Retainer Ring that won’t fall off the fitting during installation..
Convenient, hand-tightening followed by ¼ to ½ turn with a wrench to seal the fitting..
Dual-size, inside-tapped fittings - ask any installer how handy this feature can be..
Annealed tube that allows the tubing to bend and stay bent..
Same dual-seal, gasket & O-ring fittings work with both traditional yellow and Flak Jacket products..

This adapter fitting is commonly used to adapt power steering boxes to AN 6 connections.
16 mm-1.5 O-ring seal on one end and AN6 male on the other.
Inverted flare are used on most GM power steering boxes 1977 and older.
Metric thread O-ring fittings are used on later model GM power steering boxes 1978 and newer.

Compact size: 5.5′ long x 2′ diameter.
ORB-10 ports. Fittings available to adapt these filters to AN-10, -08 and -06 line sizes. (see Fittings & Adapters).
All filter assemblies feature an O-ring for positive sealing in high pressure applications..
CNC-machined from 6061-T6 aircraft aluminum..

At least two fittings needed per installation.
Used to attach CSST Catalog ID: 40753204 or 42847302 to both the beginning and.
Includes: a retainer ring, a slide ring, a silicone o-ring and a high temperature sealin.
Refer to manual Catalog ID: 42845283 for proper installation.

ORB-10 ports. Fittings available to adapt these filters to AN-10, -08 and -06 line sizes. (see Fittings & Adapters).
All filter assemblies feature an O-ring for positive sealing in high pressure applications..
CNC-machined from 6061-T6 aircraft aluminum..
Bright dip red anodized finish for a corrosion resistant, show car quality appearance..