Top With Metal Applications Reviews

Permatex 80345 White Lithium Grease, 1.5 oz.

  • All-purpose white lubricant for metal-to-metal and metal-to-plastic applications.
  • Protects against rust and makes surfaces friction-free.
  • Suggested Applications: Door hinges, hood latches, trunk latches, hatchback struts, seat tracks, garage door and delivery truck door tracks.
Check Stock

Diablo D1472CF 14-inch Steel Demon 72T Cermet II Carbide Ferrous Metal Saw Blade

  • Cermet Blend Teeth for cutting metal withstands impact, reduces wear, and lasts up to 3X longer than standard carbide..
  • Improved Laser Cut Stabilizer Vents trap noise and vibration for maximum stability, keeping it cool and accurate in metal cutting applications..
  • Triple Chip Metal Cutting Grind designed to maximize life, speed, and durability, giving burr-free cuts in metal cutting applications.
  • Tri-Metal Shock Resistant Brazing a three metal brazing system allows metal cutting carbide tips to withstand extreme impact for maximum durability.
  • Spark free Cold Cutting blades are "Hot work" compliant saving you the time and hassle of obtaining a Hot Work permit for jobsites (Check local laws).
Check Stock

Diablo D0842CF 8-inch Steel Demon 42T Cermet II Carbide Ferrous Metal Saw Blade

  • Cermet Blend Teeth for cutting metal withstands impact, reduces wear, and lasts up to 3X longer than standard carbide..
  • Improved Laser Cut Stabilizer Vents trap noise and vibration for maximum stability, keeping it cool and accurate in metal cutting applications..
  • Triple Chip Metal Cutting Grind designed to maximize life, speed, and durability, giving burr-free cuts in metal cutting applications.
  • Tri-Metal Shock Resistant Brazing a three metal brazing system allows metal cutting carbide tips to withstand extreme impact for maximum durability.
  • Spark free Cold Cutting blades are “Hot work” compliant saving you the time and hassle of obtaining a Hot Work permit for jobsites (Check local laws).
Check Stock

National Hardware N342-543 Hinge, 3-1/2\

  • Designed for 2x4 or 4x4 post applications..
  • Designed for 2x4 or 4x4 post applications.
  • Patented bearing design eliminates metal-to-metal contact for smooth, quiet operation.
  • When subjected to 312 hours of salt fog spray testing (BHMA A138.18), zinc plated hardware showed severe corrosion while hardware with WeatherGuard protection withstood these harsh conditions with very little deterioration.
Check Stock

Diablo D1472CF 14-inch Steel Demon 72T Cermet II Carbide Ferrous Metal Saw Blade (Thrее Расk)

  • Cermet Blend Teeth for cutting metal withstands impact, reduces wear, and lasts up to 3X longer than standard carbide..
  • Improved Laser Cut Stabilizer Vents trap noise and vibration for maximum stability, keeping it cool and accurate in metal cutting applications..
  • Triple Chip Metal Cutting Grind designed to maximize life, speed, and durability, giving burr-free cuts in metal cutting applications.
  • Tri-Metal Shock Resistant Brazing a three metal brazing system allows metal cutting carbide tips to withstand extreme impact for maximum durability.
Check Stock

Warehouse of Tiffany Miyaka 6-light Metal 3-blade 29-inch Lighted Ceiling Fan with Remote (Optional Finishes)

  • Cermet Blend Teeth for cutting metal withstands impact, reduces wear, and lasts up to 3X longer than standard carbide..
  • Improved Laser Cut Stabilizer Vents trap noise and vibration for maximum stability, keeping it cool and accurate in metal cutting applications..
  • Triple Chip Metal Cutting Grind designed to maximize life, speed, and durability, giving burr-free cuts in metal cutting applications.
  • Tri-Metal Shock Resistant Brazing a three metal brazing system allows metal cutting carbide tips to withstand extreme impact for maximum durability.
  • Spark free Cold Cutting blades are "Hot work" compliant saving you the time and hassle of obtaining a Hot Work permit for jobsites (Check local laws).
Check Stock

Buyers Products B2429X Forged Hinge Strap (Short)

  • National catalog model No. V281. The heavy strap hinge is designed for applications with wide mounting surfaces. Tight pin for right or left handed applications. Rust-resistant.
  • ACQ safe - safe for use with premium woods like cedar and redwood. Patented bearing design eliminates metal-to-metal contact for smooth, quiet operation. Meets ANSI/BHMA A156.20 bearing grade cycle requirements (100K). Made of stainless steel. 1 per pack. Carded.
Check Stock

Yodaoke 2pcs Magnesium Alloy Sheet AZ31B Plate Silver 1 x 100 x 100mm

  • Use for aerospace, defense and satellite applications where weight reduction is critical..
  • Use for automotive/Motor sports applications where weight reduction and strength are required..
  • Magnesium is the third-most-commonly-used structural metal, following iron and aluminum. And magnesium is the lightest structural metal with a density of 1.74 g/cm3 in its solid state..
  • It is used in a wide variety of applications from medical and metallurgical to chemical and pyrotechnic..
  • Cast magnesium alloys are used for many components of modern automobiles, and have been used in some high-performance vehicles.
  • Die-cast magnesium is also used for camera bodies and components in lenses..
Check Stock

SQINAA Magnesium Alloy 150x150mm Magnesium Foil Sheet Metal Plates AZ31B Magnesium Carving Board,4mm

  • Use for aerospace, defense and satellite applications where weight reduction is critical..
  • Use for automotive/Motor sports applications where weight reduction and strength are required..
  • Magnesium is the third-most-commonly-used structural metal, following iron and aluminum. And magnesium is the lightest structural metal with a density of 1.74 g/cm3 in its solid state..
  • It is used in a wide variety of applications from medical and metallurgical to chemical and pyrotechnic..
  • Cast magnesium alloys are used for many components of modern automobiles, and have been used in some high-performance vehicles.
  • Die-cast magnesium is also used for camera bodies and components in lenses..
Check Stock

Marine Grade Anti-Seize Stainless Steel Lubricant MRO 2400 8oz

  • MRO Solution 2400 Marine Grade Anti-Seize.
  • USA Made Product Available in 8 oz Brush-Top container.
  • Designed specifically for marine applications, Solution 2400 protects fasteners and assemblies from rust, corrosion and wear caused by fresh and salt water via direct contact and humidity. Excellent water resistance and water wash-out resistance and temperature resistant to 2400ºF. Perfect addition to stainless steel fasteners as it eases assembly and disassembly of fastener applications..
  • A simple application of the paste with the included brush to any bolt prevents metal on metal contact which eliminates the problem of galling/seizing, or, "locking up" sometimes experienced with stainless steel..
  • Manufacturer Recommended Uses: Threaded Connections Metal Fittings, Pumps, Seals, Valves Winches, Engines and Steam Traps Ship Yard Maintenance, Marinas Waste and Water Treatment Plants.
Check Stock

VISCOSITY Multi G Transmission Hydraulic Fluid - Compatible with Mahindra, McCormick Tractors - 1 Gallon - 77462JX2US

  • All-purpose white lubricant for metal-to-metal and metal-to-plastic applications.
  • Protects against rust and makes surfaces friction-free.
  • Suggested Applications: Door hinges, hood latches, trunk latches, hatchback struts, seat tracks, garage door and delivery truck door tracks.
Check Stock

Survival Flint Rod Mg Flint Rod Fire Lighter Starter Mg Flint Rod Portable Flint Rod hunting use for camping

  • Use for aerospace, defense and satellite applications where weight reduction is critical..
  • Use for automotive/Motor sports applications where weight reduction and strength are required..
  • Magnesium is the third-most-commonly-used structural metal, following iron and aluminum. And magnesium is the lightest structural metal with a density of 1.74 g/cm3 in its solid state..
  • It is used in a wide variety of applications from medical and metallurgical to chemical and pyrotechnic..
  • Cast magnesium alloys are used for many components of modern automobiles, and have been used in some high-performance vehicles.
  • Die-cast magnesium is also used for camera bodies and components in lenses..
Check Stock

MIKMAYTOO 1 Inch Carbide Hole Cutter, 25.4mm Hole Saw Metal, 1 inch Drill Hole Cutter for Thick Metal, Stainless Steel, Iron Pipes and Hard Material, Shank 3/8 inch Depth 1 inch

  • 【 Extremely Long Life 】25.4mm tungsten carbide hole saw is Industrial grade hole cutter, extremely durability for any tough material with over 10x times longer life than bi-metal and HSS hole cutters..
  • 【 Fast & Precise Cuts 】1 hole saw metal drill bit is carbide technology and optimized tooth geometry make hole saws provide superior lifetime and fast cutting in the most demanding applications..
  • 【 Applications 】1 carbide metal hole saw bit for metal provide fast and precise cuts into 3/4-inch thickness material such as : stainless steel, mild steel, alloy steel, aluminum, FRP, and plastic..
  • 【 Perfect Cutting Surface 】1 inch metal drill bit can precisely cut very high quality and smooth holes due to the excellent control of the concentricity rate..
  • 【 Double the cutting depth than other products 】1 inch metal hole saw bit cutting depth : 1 inch(25mm) ,but the other cutting depth is only 1/2 inch, so MIKMAYTOO hole saw bit for metal almost meets all metal material hole cutting..
Check Stock