Top Wire Wound Inductor Reviews

MFJ-1982HP EndFed 1/2 Wave 800W 80M-10M Wire Antenna

  • Full 1.8-30MHz Operation Custom designed inductor switch, 1000 volt tuning capacitors, Teflon insulation washers and proper L/C ratio gives you arc-free no worries operation with up to 300 Watts 1.8 to 30 MHz.
  • Tunes any Antenna Tunes out SWR on dipoles, verticals, inverted vees, random wires, beams, mobile whips, shortwave receiving antennas.... Nearly anything! Use coax, random wire or balanced lines. Has heavy duty 4:1 balun.
  • Custom Inductor Switch The inductor switch is the most likely component to burn up in any antenna tuner. MFJs inductor switch in the MFJ-949E was custom designed to withstand the extremely high RF voltages and currents that are developed in your tuner..
  • 8 Position Super Antenna Switch Lets you select two coax fed antennas, random wire/balanced line or built-in dummy load through your MFJ-949E or direct to your transceiver..
  • More hams use MFJ-949s than any other antenna tuner in the world! Has MFJs full size 3 inch lighted Cross Needle Meter (not a puny "meter" you cant read). Lets you easily read SWR, true peak forward and average reflected power simultaneously on 300 Watt or 30 Watt ranges. Lamp has on/off switch, requires 12 VDC or 110 VAC with MFJ-1312D (Not included).
Check Stock

MFJ Enterprises Original MFJ-949E 1.8-30 MHz 300 Watt Deluxe Versa Tuner II Antenna Tuner

  • Full 1.8-30MHz Operation Custom designed inductor switch, 1000 volt tuning capacitors, Teflon insulation washers and proper L/C ratio gives you arc-free no worries operation with up to 300 Watts 1.8 to 30 MHz.
  • Tunes any Antenna Tunes out SWR on dipoles, verticals, inverted vees, random wires, beams, mobile whips, shortwave receiving antennas.... Nearly anything! Use coax, random wire or balanced lines. Has heavy duty 4:1 balun.
  • Custom Inductor Switch The inductor switch is the most likely component to burn up in any antenna tuner. MFJs inductor switch in the MFJ-949E was custom designed to withstand the extremely high RF voltages and currents that are developed in your tuner..
  • 8 Position Super Antenna Switch Lets you select two coax fed antennas, random wire/balanced line or built-in dummy load through your MFJ-949E or direct to your transceiver..
  • More hams use MFJ-949s than any other antenna tuner in the world! Has MFJs full size 3 inch lighted Cross Needle Meter (not a puny "meter" you cant read). Lets you easily read SWR, true peak forward and average reflected power simultaneously on 300 Watt or 30 Watt ranges. Lamp has on/off switch, requires 12 VDC or 110 VAC with MFJ-1312D (Not included).
Check Stock

uxcell 50Pcs 0510 Color Ring Inductor 33uH 1W Axial RF Choke Coil Inductor

  • USER-FRIENDLY:More user-friendly, it can be distinguished via the recognition value and the five color wheels..
  • HIGH PERFORMANCE:Working as the 1/4W metal film inductor set, this experimental inductor set is for high performance according to strict rule..
  • HIGH QUALITY MATERIALS:The inductor is made with high quality materials, it has stable performance and has long serving life..
  • SET INCLUDES:This product includes 12 general inductance values(1UH, 10UH, 22UH, 33UH, 47UH, 100UH, 150UH, 220UH, 330UH, 470UH, 560UH, 1MH), there are 10PCs for each value..
  • WIDE RANGE OF APPLICATIONS:This inductor is especially suitable for various electrical and experimental projects such as for Arduino, breadboards, general-purpose boards, and circuits..
Check Stock

uxcell Wirewound Ceramic Potentiometer Variable Rheostat Resistor 200W 1K Ohm with Knob

  • With the compact structure and heat dissipation design, a capability of overload has been built..
  • [ADVANTAGE]- Metal wire is wound on the tube coated with non-flammable material, good dissipation, high stability and long life. Wire Wound Resistor owns high stability and accuracy. Moreover, it was used for various application because of the wide resistance range..
  • [BEST CHOICE]High precision, high power, high precision of resistance, High temperature resistance, low noise during operation, stable and reliable, can withstand high temperature and long service life..
  • [WIDELY - USED]- This variable wire wound resistor is widely used in power supply, transducer, elevators, arena and high requirement equipment industry. aging, load, simulation load test and inverter. Consumption of brakes, cranes, etc..
Check Stock

LaBella LTF-4A Low Tension Flexible Flats Electric Bass Strings

  • EXCELLENT QUALITY AND PERFORMANCE:La Bella’s Low Tension Flats are the best-selling light tension flat wound string on the market. Adopting the same techniques behind our world-famous Deep Talkin’ Bass strings, the Low Tension Flats deliver the same classic sound but without the floppy-string effect associated with other light tension flat wound strings..
  • LOW TENSION FLATS STRINGS: Stainless Steel Flat Wound, Round cores for greater flexibility and narrower ribbon for an unrivaled smooth feeling Light Tension. These hand-wound and hand-polished strings are equipped with round cores for flexibility, and narrower ribbon wire to achieve that unrivaled smooth feeling strings uniquely characteristic to La Bella Strings..
  • EASY TO INSTALL: Replace your strings in minutes with La Bella guitar nylon strings. They're labeled for quick and fool-proof installation..
  • MADE IN THE USA: La Bella guitar strings are made in the USA with American wire. Our strings are packaged using MAP Technology (Modified Atmosphere Packaging). This process controls the amount of oxygen and moisture in the packaging, which helps keep your strings fresh..
Check Stock

ADUCI BBYPP 1Pairs 200W Two Bass Crossover Treble + Midrange + Dual Woofer Speaker Crossover Audio 3 Way Crossover Frequency Divider 4-8OHM

  • The frequency divider for a treble, a midrange, two bass, the speaker can also use a single bass for high,Mid and low speakers, speakers for 4-8 ohm impedance, the design is to take 4-8 OHM public value design Of the market products are mostly the same, in order to better improve the sound quality,.
  • Material: Inductor with oxygen-free copper around the system, pure copper wire diameter thick, has been verified, 100% pure copper wire, never with enameled aluminum production.
  • capacitor with audio-specific non-polar capacitor, Need more, design reasonable, beautiful appearance,.
  • Size: 11 cm length, 7 cm wide, 2.5 cm thick..
Check Stock

uxcell Fixed Type 100W Watt 2 Ohm 2R Tubular Wire Wound Resistor

  • 14.5x6.5mm(L*W) : 18 x 8mm/0.7" x 0.3"(L*W).
  • Package Content : 1 x Wire Wound Resistor.
Check Stock

D’Addario XLB120 Nickel Wound Bass Guitar Single String, Long Scale.120

  • XLB120 is a .120 gauge nickel wound bass guitar string. Perfect as a replacement string or for creating custom sets. Part of the D’Addario XL Nickel Wound string series.D’Addario XL Nickel Wound Electric Bass strings are world-renowned as “The Player’s Choice” amongst bass players of all genres and styles. All XL strings are precision wound on our exclusive digitally-controlled machines, ensuring each string has excellent intonation, clear fundamentals, and unparalleled consistency. Each string is wound with a nickelplated steel wrap wire known for distinctive bright tone with excellent magnetic output delivering a universally appealing and versatile tone for all playing styles.D’Addario, the world’s largest manufacturer of musical instrument strings, is known as The Players Choice with a reputation for unsurpassed quality and consistency. D’Addario’s innovative, environmentally friendly packaging reduces waste and provides protection from corrosion. All D’Addario strings are manufactured in the U.S.A. using proprietary, digitally controlled, state-of-the-art machinery for unmatched performance, set after set..
  • .120 gauge nickel wound bass guitar string.
  • Round wound with nickelplated steel for a distinctive bright tone with cle....
Check Stock

MXR CAE Dual Inductor Wah Wah

  • Select between a yellow or red Fasel Inductor for two distinct tones.
  • Features a custom designed CTS extended life low noise potentiometer.
  • User selectable gain output stage with kick switch and LED indicator.
  • Designed with low noise Class 'A' Operational amplifiers.
  • Bright LEDs indicate effect status, Inductor Mode, and boost on or off mode.
Check Stock

D'Addario XLB080 Long Scale Electric Bass Strings

  • 003cp003eXLB080 is a .080 gauge nickel wound bass guitar string. Perfect as a replacement string or for creating custom sets. Part of the D'Addario XL Nickel Wound string series. 003c/p003e003cp003eD'Addario XL Nickel Wound Electric Bass strings are world-renowned as "The Player's Choice" amongst bass players of all genres and styles. All XL strings are precision wound on our exclusive digitally-controlled machines, ensuring each string has excellent intonation, clear fundamentals, and unparalleled consistency. Each string is wound with a nickelplated steel wrap wire known for distinctive bright tone with excellent magnetic output delivering a universally appealing and versatile tone for all playing styles.003c/p003e003cp003eD'Addario, the world's largest manufacturer of musical instrument strings, is known as The Players Choice with a reputation for unsurpassed quality and consistency. D'Addario's innovative, environmentally friendly packaging reduces waste and provides protection from corrosion. All D'Addario strings are manufactured in the U.S.A. using proprietary, digitally controlled, state-of-the-art machinery for unmatched performance, set after set.003cp003e.
  • .080 gauge nickel wound bass guitar string.
  • Round wound with nickelplated steel f....
Check Stock

Electronics-Salon 200W 5 OHM High Power Wirewound Potentiometer, Rheostat, Variable Resistor.

  • Product Name : Adjustable Wire Wound Resistors.
  • Installing Hole Size(Approx) : 0.52cm / 0.2"(Dia).
  • 1.4 x 0.66cm / 0.55" x 0.26"(L*W) : 1.4 x 0.66cm / 0.55" x 0.26"(L*W).
  • Total Size(Approx) : 28 x 2.7 x 6.1cm / 11" x 2.5" x 2.4"(L*W*H).
  • Package Content : 1 x Adjustable Wire Wound Resistor.
Check Stock

BHSKJSZ 13 Values 130 Pcs Inductor kit 1MH to 3.5 MH DIP Radial Power Choke Inductors Assortment Kit for Circuit Board Indoor/Outdoor LED Strip Lights

  • Industrial Electrical Inductors can be widely used in circuit boards,LED equipment, power switches, notebook, television, computers, automotive....
  • I-Shaped Inductor , for better stability, are protected with PVC/UL pipes, and can provide better stable performance. With a special guide needle....
  • inductor choke meticulous craftsmanship, compression and corrosion resistance, durable and practical, low energy consumption, stable performance, and....
  • We pack the inductors into a 13-grid plastic storage box, which is convenient for users Use and search, the inductor set box is small in size, does....
  • You will get 130Pcs DIP radial power choke inductors, including 1MH, 2MH, 2.5MH, 3MH, 3.5MH, 3.6MH, which are classified in 13 grid transparent box..
Check Stock

uxcell Vertical Toroid Magnetic Inductor Monolayer Wire Wind Wound 100uH 20A Inductance Coil

  • 【Parameters】- Outer diameter: 16mm/0.63".
  • 【Features】- The electrical characteristics of an inductor are the opposite of capacitors, "passing low frequencies and blocking high frequencies." The resistance to direct current is almost zero.
  • 【Advantage】- The inductance coil has stable performance and long service life, which is an ideal choice for your work.
  • 【Application】- Widely used in supply circuits, miniature TVs, adapters, DC-DC step-up / step-down power modules, various electronic products, etc.
  • 【Package Content】-10Pcs x Inductance Coil.
Check Stock