Top Window Regulator Track Bolts Kit Reviews

DCT 5 Star Knobs Kit 1/4in-20 Threaded Knob Bolt with Knob Clamping Knob Jig Knobs T Track Knobs and Bolts 4-Pack

  • TIGHTEN & ADJUST JIGS, FIXTURES, FENCES: The DCT | 5 Star Knob T Track Knobs Kit with Bolts & Washers 4-Pack is a package of screw-on clamping knobs that can be used on your existing saw fence, drill press, lathe, routing jig, fixture, feather board, or anywhere else that a 1/4-Inch-20 internal thread is required.
  • Many 3/4-inch wide x 3/8-inch deep (19.1mm x 9.5mm) T-tracks will not only accept this knob set but will allow you to use the 1/4-inch T-bolts.
  • PERFECT SIZE: Knobs have a 2-inch diameter and 1-inch height (5.1cm x 2.5cm).
  • T track knob threading has 1/4-inch (6.4mm) diameter and 20 threads per inch (if you turn a nut 20 revolutions it will move 1 inch).
  • Bolts and washers are 1/4”-20 x 1-1/2-inch.
  • Works with any material that is less or equal to 1-inch in thickness or any T-track that accepts standard 1/4-inch bolt heads.
  • EASY TO USE: Insert the bolt into the T-Slot head down with the screw facing upwards, place the washer on the threaded bolt facing upwards, thread the T knob onto the bolt, then lock the entire unit in place on your T-track.
  • Ergonomic design of this plastic knob set allows for easy adjustment and tightening with maximum control and agility without the use of additional tools.
  • BUILT TO LAST: T knobs package includ....
Check Stock

Kit For Build Woodworking Jigs Fixtures Tabletop | For Cutting Routing Drilling Sanding Assembling | Inline Track Clamps | Dovetail Aluminum Tracks | T-Track Accessories | T-bolts Star Knobs FullKit

  • VERSATILE - build versatile jigs, fixtures, or hold-downs, create your own clamping jigs and fixtures, such as drill press table, bench vise, corner clamp, fence clamp and more of new clamping solutions.
  • REFRESH- use our system alongside your T-track system, Ike with T tracks woodworking (T track rail or t track clamps), this kit includes all the parts to design and build any camping jigs just the way you want.
  • COMPETIBILITY- our dovetail tracks can accept t track accessories (t track clamp, like t track hold down clamp, t track stop) that uses standard 5/16'' t bolts.
  • INNOVATIVE- Revolutionary all-in-one kit includes -30⁰ dovetail aluminum tracks, T track accessories (T bolts, star knobs), inline auto-adjust clamps (dovetail clamps) and self-adhesive measuring tape. The perfect kit for woodworking as a hobby or pro.
  • HIGHLY EFFICIENT- 18’’/450mm long track and clamping capacity of the inline clamps (dovetail clamps) up to 125Lb is more than enough for your projects. The auto adjust clamps slides into dovetail sturdy aluminum tracks for fast and easy clamping. This carpentry kit will turn your woodworking projects from a headache to an enjoyable experience, while saving you time and effort!.
Check Stock

VIP KROM Window Regulator Repair Kit Compatible with VW Beetle Convertible 2003-2010 Rear Left 1Y0898292

  • Window Regulator Repair Kit Compatible With VW Beetle Convertible 2003-2010 Rear Left 1Y0898292.
  • Compatible With: Volkswagen VW Beetle 2003-2010.
  • OEM Numbers (Only for Comparison): 1Y0898291, 1Y0-898-291, 1Y0 898 292, 1Y0-898-292, 1Y0898292, ATPP1314127002, 932 54168 001, 1Y0847271C.
  • Important: Please compare your parts with the pictures before purchasing an item..
  • Package Included: 1x Window Regulator Repair Kit Rear Left Side.
Check Stock

The Long, Long Hauler!

  • CONVENIENT TRAILER E TRACK KIT - E Track Kits make it easy to get started with E-Track or to pick up coordinated essentials. This kit includes components well-suited for securing cars, ATVs, and other recreational vehicles on your flatbed trailer..
  • EASY TO USE - The included wheel straps are fitted with E-Fittings so you can easily snap them in and out of the horizontal E Track Rails. The rubber blocks fit into the rain grooves of the tire for a secure fit. Great for low-profile vehicles..
  • STRONG AND DURABLE - Our E Track Rails are made from high-quality 12-gauge galvanized steel and the wheel straps carry a working load limit of 2,000 pounds each. This kit is a great system for your vehicle transportation needs!.
  • E TRACK KIT INCLUDES - (4) 5' Horizontal E Track Rails, (8) Plastic End Caps for Horizontal E Track, and (4) Wheel Straps with E-Fittings. NOTE: Hardware (screws/bolts) to fasten the E Track is not included..
  • SPECS - Utility Car Hauling Kit | E Track Rails Made of 12-gauge Galvanized Steel | Wheel Straps Working Load Limit: 2,000-pounds each | For safety, it's recommended....
Check Stock

Window Regulator Repair Kit with Clips Rear Left or Right Door for Jaguar XK8 XKR Cabriolet Convertible CC 1996-2006

  • Window Regulator Repair Kit with Clips Rear Left or Right Door for Jaguar XK8 XKR Cabriolet Convertible CC 1996-2006.
  • Compatibility: Jaguar XK8/XKR Cabriolet Convertible CC 1996–2006.
  • Important: Please compare your parts with the pictures before purchasing an item..
  • Placement on Vehicle: Rear, Left or Right.
  • Package Included: 1x Window Regulator Repair Kit.
Check Stock

For Makita Rip Fence Circular Guide Cutting-Set for Jigsaw 4324 4327 4329K JV100 192732-4

  • INCLUDES: (2) 36-inch Universal T-Tracks (1) T Track Intersection Kit and Wood Screws.
  • UNIVERSAL T-TRACKS: Feature a double-cut design with a smooth and straight profile, delivering optimal hardware versatility – Comes with pre-drilled mounting holes for easy installation.
  • INTERSECTION KIT: Allows you to install your t-track assembly in an assortment of practical configurations, sliding your jigs and fixtures in a variety of directions.
  • VERSATILE DESIGN: Universal t track designed to accommodate 5/16” and 1/4” t-bolts, and 1/4” hex bolts.
  • PREMIUM BUILD: T-Tracks and Intersection components are constructed out of anodized aluminum, providing you with long-term durability, anti-corrosion and wear resistance.
Check Stock

6.0 Blue Spring Kit Upgrade - Fuel Regulator Kit - Compatible with Ford Trucks - Blue Spring Kit 6.0 Powerstroke F250, F350, F450, F550 2003, 2004, 2005, 2006, 2007-Replaces 3C3Z-9T517-AG, 3C3Z9T517AG

  • Increase fuel pressure for increased performance. This upgrade will increase the fuel pressure 10-15psi on your 6.0 powerstoke. Increases the life of fuel injectors too..
  • Easy To Install. The 6.0 blue spring kit includes all the gaskets, seals, bolts, spring, and regulator housing needed for installation. This fuel regulator kit includes a detailed installation video (link included in packaging) with step by step instructions for the blue spring upgrade..
  • Compatible with Ford 6.0L Powerstroke Trucks - F250, F350, F450, F550 model years 2003, 2004, 2005, 2006, 2007.
  • Equivalent to factory part 3C3Z-9T517-AG Perfect for stock or modified trucks. The 6.0 Blue Spring Kit is a common upgrade because it increases injector life, increases drive-ability, and gives smoother power delivery..
  • Complete kit with everything needed for installation on your 6.0 Powerstroke: blue spring upgrade, 4 rubber o-ring seals, 3 orifice seals, 4 screws, fuel pressure regulator housing.
Check Stock

SANKEYTEW 6FT Barn Door Hardware Kit, lite Version- Combination Track- Easy to Install- Manual Included- Black (J-L-5)

  • ✅[UPGRADE DESIGN-LITE VERSION] Adapt the new type carbon steel instead of the standard one(lighter but load maximum 265lbs, More sturdy and stable), Make it easy to hold up the barn door track during installation. Low clearance barn door hardware system, Less space required above the doorway, only 5" required from top of barn door to ceiling ..
  • ✅[HIGH STANDARD RAW MATERIAL] Barn door hardware kit are made of Super quality steel in 5/32" thickness, Ensure barn door system will be more sturdy and stable durability. The wheel part are pom made with 2 pcs Bearings inside(more function than steel, less scratch to barn door rail), All these making the sliding smoothly and quietly..
  • ✅[WHY US] Get high quality barn door hardware kit from us ,All the barn door track had inspected in factory before delivery，Passed more than 100,000 times opening and closing test. Barn door hardware kit with a manufacturer price,why not ? In case you got any confustions on installation or missing parts after got the package ,kindly feel free to contact us via amazon directly ,we will get back to you in 24 hours ,thank you ..
  • ✅[DO MY BARN DOOR FIT] 6ft Barn door hardware kit hold up to 265 lbs, Fit for door panel width up to 36", Fit for door panel thickness from 1-3/8" t....
Check Stock

Deadwood Crafted Tools 3 Star Knobs Kit - 10pk 1/4in-20 Threaded Knob Set with Jig Knobs and Bolts for Clamping Projects

  • [Adjust and Tighten]: The DCT 3 Star Knob 10 pack T Track Knobs Kit is the perfect package of screw-on clamping knobs that can be used on your saw....
  • [Perfect Size]: T track knob threading has 1/4-inch (6.4mm) diameter and 20 threads per inch (if you turn a nut 20 revolutions it will move 1 inch).
  • [Easy to Use]: Ergonomic design of this plastic knob set allows for easy adjustment and tightening with maximum control and agility without the use of....
  • [Built to Last]: T knobs package includes plastic knobs that are constructed from polypropylene plastic with molded-in brass insert that will not....
  • [Contents]: Tightening knob kit includes (10) T track knobs, (10) bolts, and (10) washers for your convenience.
Check Stock

POWERTEC 71703 Table Saw Sled and Blade Guard Kit w/T-Track, Miter Bars, Crosscut Bladerunner, Flip Stop, Bolt and Screws Set

  • INCLUDES: 24” universal t track, 19” HDPE miter bars, 3” flip stop, blade guard, flat head wood screws, hex head bolts and nuts.
  • FUNCTION: Provides you with an easy DIY kit that includes a t-track for mounting flip stops and fixtures, a premium 3” flip stop, blade guard and hardware needed to cut boards to precise lengths while preventing measuring and cutting errors.
  • 100% SAFE: Makes crosscutting safer, more efficient and convenient, while avoiding risking your limb when crosscutting smaller pieces with a crosscut sled specifically calibrated with your table saw.
  • PREMIUM QUALITY: The t-track included in this kit is made of solid extruded aluminum and the miter bars are crafted with high durability, high stability HDPE (high density polyethylene).
  • DIMENSIONS: Universal T-Track (24" long) | High Density Polyethylene bars 19" long x 3/4" x 3/8" | 3" Flip stop | Flat Head Wood Screws #6 x 1/2" | 1/4"-20 x 1/2" hex bolts | 1/4"-20 acorn hex nuts.
Check Stock

Bayou Classic DB250 Double Burner High-Pressure Cooker with Extension Legs

  • 31-1/2-inch-long cooking surface with two 14-inch-round burners.
  • Burners accommodate two 60-quart stockpots.
  • 13-inch-tall heavy-duty welded steel frame.
  • Extension legs raise height to 25 inches with no screws or bolts.
  • Includes 3-foot pressure hose, valve assembly kit, regulator kit.
Check Stock

CCH Portable AIR Conditioner Parts Combo Sale

  • UNIVERSAL: YoleShy window vent kit includes 4 plates, 5 diameter coupler, sealing tape, and screw accessories. Suitable for all air conditioner hoses....
  • SLIDING TRACK: YoleShy ac vent kit has a humanized rail design, which is easy to slide the seal plates, and fast lock. No tools required, length....
  • VERTICAL & HORIZONTAL USE: It is suitable for most vertical and horizontal sliding windows. You can use a 2-plates combination, 3-plates combination,....
  • GOOD SEALING: Embed the plates into the window track and clamp them to achieve a good sealing effect, which can keep your room cool at all times,....
  • EASY TO INSTALL AND DISASSEMBLE: YoleShy window seal kit is made of high-quality PVC, which anti-extrusion, anti-aging, and can be used year after....
Check Stock

SKYSEN 6FT Barn Door Hardware Kit, Sliding Barn Door Hardware Kit, Barn Door Track, Combination Track- Smooth and Quiet- Easy to Install- Manual Included- Lite Version- Black (J-Lite-5)

  • ✅[INNOVATION DESIGN-LIGHT VERSION] By using the light version carbon steel for barn door hardware system(lighter but hold maximum 265lbs, More stronger and stable), The barn door track will be easy to lift up during installation. Low clearance barn door hardware, Less space required, The barn door roller is shorter, Which make the space required from top of barn door to ceiling will be only 5"..
  • ✅[PREMIUM RAW MATERIAL] Barn door hardware kit are made of premium quality carbon steel in thickness of 5/32", Which make the barn door kit system more sturdy and stable durability. The wheel part are made of POM(better than steel, few scratch to barn door track), 2 pcs Bearings in side wheel, All these ensure the sliding will be smoothly and quietly..
  • ✅[REASONS FOR CHOOSING US] Get super quality barn door hardware kit from us ,All the barn door hardware kit have been inspected in factory before delivery，Passed 100,000 times opening and closing test.Get barn door hardware kit with a manufacturer price,why not ? In case you got any confustions on installation or missing parts after got the package ,kindly feel free to contact us via amazon directly ,we will ....
Check Stock