Top Water cooled Engine Oil Reviews

TFCFL 4 Stroke 6.0HP Electric Outboard Motor,Outboard Motor Boat Engine Water Cooling CDI System,Heavy Duty Inflatable Fishing Boat Engine 3.75KW 2500 R/MIN

【2 STROKE 6 HP OUTBOARD MOTOR BOAT ENGINE】2 stroke 6HP power, Water cooling technology to improve the reliability of the whole machine. Superior engine water cooling system for improved engine performance Made of special high-strength aluminum alloy material with high hardness, strong durability, good rust and corrosion resistance..
【SIZE & PREFORMANCE】Overall length 1040mm(40.9 in).
Full throttle operating range 5000-6000r/min.
Idling speed ( in neutral) 1000±100 r/min.Engine oil mixing ratio Fuel 50: Engine oil 1.
Spark plug 25.0Nm(18.4 ft-lb) (2.55 kgf-m).
Engine oil drain bolt 18.0Nm(13.3 ft-lb) (1.84 kgf-m)..
【WIDE APPLICATION】Perfect match inflatable boats, fishing boats, sailboats, and small yachts.(The outboard motors are all installed on the stern straight plate and cannot be installed in other places).
【WARM TIPS】Please add gear oil to the gears before use the motor and replace gear o....

Check Stock

EONLION 10 Row AN10-10AN Oil Cooler Kit Universal Engine Transmission Aluminium Alloy Black Usable To Cool Down Engine Oil Increases Engine Oil Capacity Available Comes with 2 Oil Lines

ADVANTAGES- Made of high quality T-6061 aluminum. It can be used to cool engine oil, transmission and rear differential..
FUNCTION- Keep the oil temperature low to prevent damage or even seizure of the engine..
HOW IT WORKS- The 10-row oil cooler is basically like a radiator to cool your oil. Install the engine oil in a reasonable location with good air, your engine oil will enter the engine oil from here, and then reflux and cool down, and ensure that the engine oil is within a certain working temperature range..
ADAPTATION- This is a universal oil cooler kit. The design of this oil cooler is smaller and lighter, suitable for narrow spaces and meet the needs of more lines at the same time..
WHY DO WE NEED AN OIL COOLER KIT-When the engine rotates at high rpm under high load, it will generate friction, and the heat generated by friction will be transferred to the oil instead of overheating. After the engine oil is decomposed, it cannot be lubricated well, thus shortening the service life of the engine..

Check Stock

Arnold 2-Cycle Engine Oil - 1-Mix 16 oz.

For use with any 2-cycle engine with a ratio of 32:1, 40:1 and 50:1.
Provides superior lubrication for 2-cycle air-cooled gasoline engines..
Convenient Tip "n" Measure plastic bottle, with fuel stabilizer: holds 16 oz..

Check Stock

BJTDLLX 2 Stroke 12 HP Outboard Motor 169CC Heavy Duty Fishing Boat Engine Marine Engine with CDI Ignition System Water Cooling System

【2-stroke 12HP Outboard Engine】Displacement: 169CC.
Control System: Tiller control Starting System: Manual start..
【Details】Control System: #93 gasoline.
Recommended Propeller range: 3 -9"1/4''x8".
Recommended Lubricant: 2 Stroke Lubricating oil.
【Advantages】water cooling technology improves the reliability of the whole machine.
light weight, easy to carry, unique appearance, large fuel tank capacity. Standard fuel tank capacity: 24L..
【Reminder】The oil must be two-stroke special oil. The two oils must be mixed evenly.
after use, the fuel in the carburetor must be completely discharged. Mixing ratio: fuel: oil=50:1..
【Gear Oil Filling Method】There is a screw on the gear box, unscrew the screw to add gear oil. Each outboard engine is filled with gear oil before leaving the factory, so it does not need to be refilled for the first time. After that, add it according to personal use and check it every ten hours..

Check Stock

6HP 2-Stroke Outboard Motor, Heavy Duty Boat Motor Kayak Motor Fishing Boat Motor Engine Water Cooling System (6HP 2-Stroke, Water-Cooling)

【2 Stroke, 6 Horsepower】The 6HP 2-Stroke engine provides all the power you need for motoring in your boat. The superior engine water cooling system improving engine performance. It will make you more relaxed and efficient whether work or play!.
【Main Parameters】Full throttle operating range 5000-6000r/min.
Idling speed ( in neutral) 1000±100 r/min.
Engine oil mixing ratio Fuel 50: Engine oil 1.
Spark plug 25.0Nm(18.4 ft-lb) (2.55 kgf-m).
Engine oil drain bolt 18.0Nm(13.3 ft-lb) (1.84 kgf-m)..
【360° Steering】360 degree rotation, rotating in the opposite direction without changing speed. Allows you to reverse without shifting gears. It is suitable for various styles of small watercraft, such as kayaks, canoes, dinghies, and inflatable boats..
【Inline Propeller Design】The propeller of this item adopts an inline design, with high-speed engine that can more effectively play the outboard exhaust and thrust. And it has a tilt or lift function, and can be used for shallow water operation for your convenience..
【CDI Ignition System】The ignition system of this motor is a CDI ignition system. You can start the motor quickly and safely. It saves your ti....

Check Stock

Minn Kota E-Drive - Electric Outboard - 2Hp - 48V - 20" Shaft

♛ 246CC Outboard Stroke Petrol Heavy Duty Boat Engine Motor Description -- Displacement: 246CC.
Recommended Lubricant: 2 Stroke Lubricating oil.
♛ Outboard Stroke Motor Boat Engine Works with little noise.Economical and compact structure. Durable, lightweight and and easy to carry,anti-corrosive construction. forward and neutral design.Maneuverable and safe twist grip throttle control.Packing size: 133x71x38.5cm.
Recommended Propeller range: 3 -9"1/4''x8".
♛ Outboard vertical mount engine design for increased power, performance and durability, superior CDI Ignition system for increased efficiency, twist grip throttle handle and engine stop button for improved response..

Check Stock

Viewer Questions: Fuel System Requirements When Converting From Gas to Diesel

【Accurate Fuel Injection】Air-cooled diesel engine four-stroke single cylinder adopts direct injection fuel system with good atomization to achieve accurate fuel injection and save fuel for you. Commodity parameters:Crankshaft: Horizontal,Size: 13.2 * 14.96 * 16.3 inches,Net weight : 59.5 lb,Material: aluminum alloy box,System: direct injection fuel system,Rated power: 3.6kw,Displacement (L): 0.247,Fuel tank volume (L): 2.5,Engine speed: 3600r / min..
【Speed Control Handle】Diesel motor engine can be positioned at any speed, equipped with throttle cable mount, you can install the throttle cable as needed..
【Fast Heat Dissipation】4 Stroke single cylinder air cooled vertical engine has an air-cooled diesel engine made of aluminum alloy with reinforced and thickened treatment, which makes it have good heat dissipation and protect the machine..
【Small Space Occupation】Tiller crude oil engine has compact structure and small size, occupying less space than other engines..
【Wide Range of Application】Heavy duty single cylinder air- cooled diesel motor engine is suitable f....

Check Stock

Diesel Water Parking Heater Hydronic Heater 5KW 12V Boat Caravan Motorhome Truck Camper Trailer Remote Control Diesel Water Heater Kit

PROTECT YOUR ENGINE ➤ The water heating type parking heater uses automobile coolant to exchange heat, preheats the engine and the cab, solves the problem of difficult engine startup at low temperature, greatly reduces air-cooled wear caused by low temperature startup, and extends engine life by more than 30%..
LESS FUEL PREHEATING ➤ Compared with cold-start engine preheating, the water heating parking heater preheating consumes less fuel. In the cold winter, you can warm up the engine and cab before getting on the car to drive away the severe cold. Improve the driving environment and no longer need a warm store..
FULL INSTALLATION SET ➤ 1 x Water Parking Heater, 1 x Auto Switch And Remote Control (Batteries Not Included), 1 x Water Pump, 1 x Wiring Harness, 1 x Tube, 1 x Oil Pump, 1 x Pump Holder, 1 x Fuel Filter, 1 x Oil Tube, 1 x Big Elbow, 1 x Small Elbow, 1 x Air Inlet Hose, 1 x Exhaust Pipe, 1 x Exhaust Silencer, 1 x Hose Holder, 1 x Cross, 1 x Air Filter, 6 x Short Pipe, 1 x Oil Extractor, 12 x Hose Clamps, 12 x Small Hose Clamp, 5 x Screwiv, 4 x Screw, 1 x Iron Stent..
TECHNICAL PARAMETERS ➤ Material: Metal &....

Check Stock

BILT HARD 420cc 15HP Gas Engine with Electric Start, Horizontal Shaft 4 Stroke OHV Gas Motor, Gas Powered Multi-Use Engine

POWERFUL ENGINE - Our 420cc displacement 4-stroke horizontal cylinder gas engine has a max torque of 19.56ft.lbs @2500RPM, max 3600 RPM speed, 15 maximum horsepower, 1.7 gal fuel tank. Built to meet & exceed industrial grade quality standards & provide dependable performance. The engine is shipped dry so make sure you add gasoline and engine oil correctly before starting (not included)..
SHAFT SPECS - 1 in Diameter, 3.48 in Length, end tapped with 3/8 in.-24 UNF.
Mounting pattern 7.7L x 4.06W-4.09W in. Durable design runs quiy and provides smooth operation.This engine spark plug system can take Torch: F6TC spark plugs, with a clearance of: 0.027-0.0.31 in. The engine runs on a minimum 87+ unleaded gasoline (10%003e ETHANOL recommended)..
SAFETY & WIDELY APPLICATIONS - Built-in Force Air-Cooled and Splash Lubrication System, keeping the motor cool during extended use of time and ensure the operator's safety. A low oil shutoff functionality turns the engine off to prevent serious damage or failure. It's the perfect replacement engine for a pressure washers, cement mixers, compressors, mowers, log splitters, vacuums, tillers, water pumps, chipper/shredders and blowers..
GREAT REPLACEMENT - Our 420cc 15HP Horizontal Engine is a great replacem....

Check Stock

Diesel Engine 247CC 4 Stroke 5HP Single Cylinder Air Cooling Vertical Engine Motor Hand Start Direct Injection 3.6KW (Black, 173FA)

【HIGH PERFORMANCE DIESEL ENGINE】247CC 4 Stroke Diesel Engine, equipped with self-injection diesel system, good atomization, low diesel consumption, more punctual diesel injection, and long service life. Widely Applicable for road cutting machine, grinding machine, water pump, micro tiller, air conditioning compressor, micro tiller, etc..
【RELIABLE COOLING DESIGN】Strengthen thickening aluminum alloy box, fast heat dissipation, low oil temperature, light weight. Through advanced software analysis and optimized design, the reliability of the diesel engine in terms of structure and cooling is ensured..
【EASILY SPEED CONTROL】Comes with a speed control handle, it can be positioned at any speed, equipped with throttle cable mounting seat, and can install throttle cable according to needs. Compact structure, small size and light weight. Compared with gasoline engines, it is more economical and lighter..
【SUPERIOR DIESEL SYSTEM】Large capacity diesel tank, enhanced thickening, large diesel tank volume, special painting process, seam welding, and oil leakage. Optimize the diesel system and intake and exhaust systems to save energy and diesel..
【MAIN PARAMETERS】Displacement: 247CC, Rated power: 3.6KW, Engine speed: 3600 RPM, Cooling mode: Air coo....

Check Stock

X-PRO Long Case 150cc 4-stroke GY6 Air cooled Moped Scooter Engine with CVT Automatic Transmission, Electric/Kick Start…

【Parameters】Engine type: Gy6 single-cylinder four-stroke, engine oil type: Sf15w-40 without oil, carburetor type: pd24j, carburetor type: horizontal vacuum carburetor, spark plug type: a7tc, ignition type: cfw, cooling: air cooling, oil number: >=87#, compression ratio: 9.2:1, clutch: shoe type automatic centrifugal dry clutch, transmission: cvt, ignition system: Cdi, starting method: electric/kick.
【Specification】 Displacement: 150cc, maximum power (Kw/R/Min): 6kw/7500r/Min, rated power (Kw/R/Min): 5.2kw/7000r/Min, maximum torque (Nm/R/Min) : 7.6nm/6500r/Min, minute steady idle speed 1600±150r/Min, piston diameter: 57.4mm, piston stroke: 57.8mm, bore and stroke 2.26" X 2.28" (57.4mm X 57.8mm), lubrication capacity: 0.26 gallons (1200ml), cylinder working volume: 0.03 gallons (149.6ml), speed: 8 poles.
【Features】 Large-flow oil pump: reduce friction pair wear and prolong engine service life.
aluminum cylinder head and cylinder block: improve heat dissipation, reduce weight, and increase engine torque.
crankshaft: engine low-speed high torque, crankshaft connecting rod adopts large diameter bearing, Increase the reliability of the bearing.
lubricating oil filter: help to remove solid pollutants in the lubricating oil, greatly reduce the wea....

Check Stock

150CC GY6 Complete Engine Motor, 4 Stroke Single Cylinder Long Case Engine Motor Kit for Scooter ATV Go Kart CVT CFW + CDI (USA STOCK)

☀【Engine Specifications】Engine Type: GY6 Single Cylinder 4-Stroke.
Engine oil type: SF15W-40 not come with oil.
Carburetor Type: Horizontal Vacuum Carburetor.
☀【CVT design】CVT is mainly composed of 2 transmission belts and 2 transmission pulleys. It adopts a compact and simple design, which can seamlessly switch between an unlimited number of different gear ratios to achieve smooth acceleration..
☀【Lubricating oil filter】Helps to remove solid pollutants in the lubricating oil, greatly reducing the wear of the friction pair and prolonging the service life of the engine. High-flow Oil Pump: Reduces the wear of friction pairs and prolongs the engine service life..
☀【Forced air-cooled engine】The outside of the cylinder is covered with metal fins. When the cooling fan blows air over the fins, the heat generated by the engine is directly released into the air. It has the advantages of simple structure, light weight, wide adaptation to climate change, quick start-up, and no need of radiator..
☀【Logistics and Service】Sometimes the carrier is not very good at taking care of our packages, so it may cause some damage in trans....

Check Stock

LCGP 800ml Cooling Catch Bottle Aluminum Radiator Coolant Tank Black Overflow Oil Catch Tank for Universal Car

OVERFLOW OIL CATCH TANK: Improve the cooling efficiency of the water tank. Save the cooling systems of your car. And keep the engine within the operational temperatures to improves its performance..
MATERIAL&SIZE: The radiator coolant tank is made of high quality T6061 aluminum, and anodized polished. These make the radiator coolant tank more durable and anti-corrosive. And the volume of the cooling catch bottle is 800ml, height 8.27”, bottom diameter is 2.96”, the length of hose is 39.37”..
Application: Our coolant overflow tank bottle can fit for most vehicle. It’s used in the cooling system of your car to save the cooling system from rust. Also protects the necessary components from oil..
WORKING PRINCIPLE: When the engine works, the coolant in the radiator will sealed through the pressure cap and flows through the hose into our cooling catch bottle. And when the radiator cools, the coolant in the cooling catch bottle recycle back into the radiator..
INSTALL AND WARRANTY: Install the bottle in the car’s pipe, away from the heat source, connect the bottle to the radiator with a hose. We provide this overflow oil catch tank have 1-year warranty. Our customer service will try our best to help you..

Check Stock