Top Vortec Carb Manifold Reviews

Aluminum Stain SBC Small Block Chevy 350 400 Air Gap intake manifold Dual Plane Chevy Small Block 265-400 Idle-5500RPM, DM-3602

  • Square bore carb bolt pattern for the Holley 4150/4160 style carburetor.
  • Open air gap under plenum for cooler fuel charge.
Check Stock

Aluminum High Rise Small Block Chevy SBC Vortec Hurrican Single Plane Intake Manifold 350 Single Plane Modified 3000-7500 RPM

  • This Satin Vortec Hurricane Single Plane Intake Manifold is the best performing single plane race style manifold available for engines using the 1996 and later Vortec (Gen 1+) cylinder heads..
  • It has been proven over and over in dyno tests and on track use to provide unequaled power and performance..
  • It features four corner water ports, a tapped fifth port in the front face, nitrous bosses, and dual distributor holddowns..
  • 360° single plane high rise design for outstanding power from 3000~7500 RPM.
Check Stock

Carburetor Intake Manifold Boot Joint for Yamaha Warrior 350 YFM350X 1987-2004, Fit for Yamaha Wolverine 350 YFM350FX 4x4 1995, 1UY-13586-01-00, 1UY-13586-02-00, CNC 6061-T6 Aluminum Alloy

  • 1. Fitment - CNC aluminum alloy carburetor carb intake manifold boot fit for Yamaha Warrior 350 YFM350X 1987-2004, fit for Yamaha Wolverine 350 YFM350FX 4x4 1995.
  • 2. Reference OE Number - 1UY-13586-01-00, 1UY-13586-02-00.
  • 3. Function - Replacing the new intake manifold interface can solve problems such as high idle speed, weak acceleration and easy flameout during acceleratio. The carburetor intake manifold boot replaces the old or broken manifold boot perfectly..
  • 4. Material + Installation - Carburetor carb intake manifold boot made of premium quality rugged design with aluminum alloy material, for extended lifetime, with high temperature resistance, high pressure resistance and other advantages. Easy to install, just replace the old or broken intake manifold interface during installation.
  • 5. Service - We offer CNC aluminum alloy carburetor carb intake manifold boot 2-years shelf life, hassle-free return and money back policy, buy with confidence! any questions about carburetor carb intake manifold boot, please contact us by email, we will reply you within 12 hours, you will get a brand new CNC aluminum alloy carburetor carb intake manifold boot.
Check Stock

Dokili High Rise Single Plane Intake Manifold for Small Block SBC Vortec 350

  • 【Fitment】Dokili aluminum intake manifold for small block engines using the 1996 and later Vortec (Gen 1+) cylinder heads..
  • 【Features】Dokili intake manifold comes with 360° single plane and high rise designs, providing excellent high RPM power, from 3,000 to 7,500 RPM. It features four corner water ports, a tapped fifth port in the front face, nitrous bosses and dual distributor holddowns..
  • 【Premium Material】Built with natural finish aluminum of superb quality and fit. Permanent mold casting. Angles and straightness comparable to factory manifolds. The port size on this manifold is 2.06" x 1.18". Manifold Height is 6.06"..
  • 【Superior Design】Cast-in bosses on intake runners can be drilled and tapped for use with nitrous. Dual distributor hold-down provisions for extra protection against distributor rotation. Ideal port position allows custom porting for maximum power..
  • 【Package Include】1X SBC Intake manifold. Professional installation in highly recommended..
Check Stock

New 4.3L, 262 CID 4 barrel Vortec Marine Intake Manifold Assembly. Replaces Mercruiser 824330T1, Volvo Penta 3855806

  • New 4 Barrel 4.3L Vortec marine intake manifold assembly..
  • Direct replacement for Mercruiser 824330T1.
  • Direct replacement for Volvo Penta 3855806.
  • 8-bolt intake manifold applications. Years 1997-newer..
Check Stock

New 4.3L, 262 CID 2 barrel Vortec Marine Intake Manifold Assembly. Replaces Mercruiser 824324T02, Volvo Penta 3855805

  • New 2 Barrel 4.3L Vortec marine intake manifold assembly..
  • Direct replacement for Mercruiser 824324T02.
  • Direct replacement for Volvo Penta 3855805.
  • 8-bolt intake manifold applications. Years 1997-newer..
Check Stock

Speedmaster 1-147-001 LowRise Intake Manifold 1957-1995 Small Block Chevy 350 He

  • Satin Finish The Speedmaster LowRise Manifolds are our lowest profile manifold and is also the only one that is street legal on pollution controlled vehicles. It is set up to accept a spread bore carb but comes with an adapter plate that permits the use of square bore carbs. To remain street legal with a square bore carb, you must use one that is also approved as street legal for your application. This Speedmaster LowRise manifold is a direct replacement for the stock manifold on 1957-95....
Check Stock

Remflex 2008 Exhaust Gasket for Chevy V8 Engine, (Set of 2)

  • Chevy V8 - 4.8L, 5.3L, 6.0L LS2 ('99-'08), 5.7L, LS1 LS6 ('97-'08), includes Vortec, Manifold or Headers, 2/Set.
  • Port configuration comparable to Fel-Pro 1440.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
  • Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock

Carburetor Intake Manifold Boot,for Yamaha Big Bear 350 Yamaha Warrior YFM 350 YFM350 1987-2004 ATV Carb, by NAKAO

  • ➤[Replace]: Replace your old cracked and broken intake boot. Perfectly connects the carburetor and the engine, provides new power for better operation Replace Part Number：3HN-13586-02-00, 3HN-13586-01-00..
  • ➤[Fitment]: This Carburetor Intake Manifold Boot Fits for Yamaha warrior 350 YFM350 1987-2004, Yamaha MOTO-4 350 YFM350 1987-1990, Yamaha MOTO-4 350 YFM3501992-1995, Yamaha Big Bear 350 YFM350 4WD 1993-1996,Yamaha Big Bear 350 YFM350 2WD 1996-1998, Yamaha Kodiak 400 YFM400 4WD 1996-1998, Yamaha wolverine 350 YFM35F 1995.
  • ➤[Installation]:This Carburetor Intake Manifold Boot installation is super easy and Direct fitment and perfect replacement,meets or exceeds OEM standards.fit for warrior 350 intake boot, yamaha warrior intake boot, warrior 350 intake, yamaha intake manifold, wolverine intake boot, warrior 350 parts, warrior carb boot, banshee intake boots, banshee carb boots, intake manifold, efi yamaha warrior 350 part, yamaha warrior banshee parts, yamaha warrior carburetor, intake manifold rubber boot.
  • ➤[Package include]: 1x Intake Manifold, 1x Carburetor O-Ring ,2x spring pads , 2x Bolts, 2x Washers, 2x Nuts. please check it befor carefully to make sure it is what you need..
  • ➤Providing high quality and professional parts with great serv....
Check Stock

T4 TURBO MANIFOLD CAST for VORTEC LS MOTORS 4.8 5.3 5.7 6.0 6.2 4x2 4x4

  • STRONG CAST TURBO MANFOLD with T4 FLANGE.
  • T4 CAST MANIFOLD FOR PASS. SIDE ON ALL LS/VORTEC MOTORS...
  • AMAZING STYLE with EXTRA THICK HEAD FLANGE.
Check Stock

Dokili Aluminum Intake Manifold Small Block Air Gap for SBC Vortec 350 1996-up

  • 【Fitment】Dokili aluminum intake manifold is compatible with 96+ Vortec engines..
  • 【Features】Dokili intake manifold comes with 180° high rise and dual-plane designs, providing excellent high RPM power, from 1,500 to 6,500 rpm. It features four corner water outlets, dual distributor hold down provisions, accepting late model water neck, A/C, alternator and HEI brackets..
  • 【Premium Material】Built with natural finish aluminum of superb quality and fit. Angles and straightness comparable to factory manifolds. Port size measures 2.06" x 1.18" and intake measures 4.65" tall..
  • 【Dual Plane】The intake is square bore style and works with all 4150 Holley style carburetors. Dual plane designs have two smaller plenums that receive air from the carburetor or throttle body, which results in a higher velocity through the booster making the engine more responsive to the driver..
  • 【Air Gap】The air gap design allows air to flow under the plenum to prevent heat transfer from the engine resulting in more horsepower..
Check Stock

Mikuni Round Slide VM Series Carburetor 30mm Bore VM30-83

  • ...BK200 / Powersports BT200X / Powersports CT200U Trail / Powersports KT196 / Mega Moto Mega Max (MM-B212MX) Mini Bike / Moto / Mega Moto MM-B212 / Predator 212cc 6.5 HP / TrailMaster Buggy Interceptor / TrailMaster MB200-1 /.
  • Other spare parts：Apart from VM22 26mm carburetor, 38mm air filter, fuel filter,Inlet Pipe Manifold. At the same time, we also have intimately equipped with other parts that may need to be used, 10 models Carburetor Carb Main Jets(#88-#125),Gaskets,Mounting Screws,Three types of wrenches.
  • Package Include:1 pcs carburetor,1 pcs air filter,1 pcs fuel filter,1 pcs Inlet Pipe Manifold,1 Set Gaskets,1 Set Carburetor Carb Main Jets ,3 pcs wrench,1 set Mounting Screws.
Check Stock

Carburetor for YERF DOG DOGG GY6 150 150cc Scooter Moped Go Kart Carb

  • Fits YERF DOG DOGG GY6 150 150cc scooter moped go kart carb..
Check Stock