Top Cold Air Intake For 4 vortec Reviews

Aluminum High Rise Small Block Chevy SBC Vortec Hurrican Single Plane Intake Manifold 350 Single Plane Modified 3000-7500 RPM

  • This Satin Vortec Hurricane Single Plane Intake Manifold is the best performing single plane race style manifold available for engines using the 1996 and later Vortec (Gen 1+) cylinder heads..
  • It has been proven over and over in dyno tests and on track use to provide unequaled power and performance..
  • It features four corner water ports, a tapped fifth port in the front face, nitrous bosses, and dual distributor holddowns..
  • 360° single plane high rise design for outstanding power from 3000~7500 RPM.
Check Stock

UTV INC Polaris RZR RS1 Intake or CVT Intake Air Scoop

  • RAM AIR / AIR SCOOP for BMW e90/91/92/93 316d, 318d, 320d, 325d, 330d, 335d, 316i, 318i, 320i, 325i, 328i, 330i, 335i M3. InTake + is supposed to cause cold air intake effect on the stock intake of your E90/91/92/93, without requiring corrections and putting a cone filter..
  • Directs cold air directly to the filter, through the front grill of the car. RAM AIR / AIR SCOOP is effective and contributes enhancing horsepower and torque after 60 km/h..
  • Made of stainless steel, not plastic and low quality 3D models that can't withstand 6 months of weather and are quite difficult to install.this RAM AIR INTAKE SCOOP can withstand the various weather for a long time and has anti-corrosive..
  • Directs cold air directly to the filter through the front grill of the car, preventing re-absorbing the heat in engine compartment. RAM AIR / AIR SCOOP is effective and contributes enhancing horsepower and torque after 60 km/h..
  • Very easy to install! Do not need anything, but tools for removing the stock air duct!Compulsory mod for anyone, who wants to improve the performance of his car!.
Check Stock

Dokili High Rise Single Plane Intake Manifold for Small Block SBC Vortec 350

  • 【Fitment】Dokili aluminum intake manifold for small block engines using the 1996 and later Vortec (Gen 1+) cylinder heads..
  • 【Features】Dokili intake manifold comes with 360° single plane and high rise designs, providing excellent high RPM power, from 3,000 to 7,500 RPM. It features four corner water ports, a tapped fifth port in the front face, nitrous bosses and dual distributor holddowns..
  • 【Premium Material】Built with natural finish aluminum of superb quality and fit. Permanent mold casting. Angles and straightness comparable to factory manifolds. The port size on this manifold is 2.06" x 1.18". Manifold Height is 6.06"..
  • 【Superior Design】Cast-in bosses on intake runners can be drilled and tapped for use with nitrous. Dual distributor hold-down provisions for extra protection against distributor rotation. Ideal port position allows custom porting for maximum power..
  • 【Package Include】1X SBC Intake manifold. Professional installation in highly recommended..
Check Stock

Canitu Dynamic Air Intake Scoop, Ram Air, Cold Air Intake Kit Systems for BMW 323i 325i 328i 330i M52 M54 E46 M3 2001-2006, Increasing Horsepower & Improving Throttle Response, Black

  • Fit for BMW e46 316i, 318i, 320d, 330d, 320i, 323i, 325i, 328i, 330i, M3. InTake + is supposed to cause cold air intake effect on the stock intake of your E46, without requiring corrections and putting a cone filter..
  • Directs cold air directly to the filter, through the front grill of the car. InTake + is effective and contributes enhancing horsepower and torque after 60 km/h..
  • Compulsory mod for anyone, who wants to improve the performance of his car!.
  • The air scoops are designed to introduce a RAM-AIR effect by directing COLD air into the intake from the front grille of your for BMW 3 Series e46 . Using the stock intake in conjunction with the scoop you reap the benefits of an intake system without the heat soak that most aftermarket intakes suffer from. The scoops are especially effective at producing more horsepower at higher speeds(35mph+). A must have mod for BMW 3 Series(E46) 1997 - 2006，if you want more performance from your car!.
Check Stock

K&N Cold Air Intake Kit: Increase Acceleration & Engine Growl, Guaranteed to Increase Horsepower up to 18HP: Compatible with 6.2L, V8, 2008-2013 Chevy Corvette, 63-3073

  • GUARANTEED INCREASE IN HORSEPOWER & TORQUE: K&N cold air intake systems provide a less restrictive path for airflow, increasing the volume of cool, oxygen-rich air into your engine an estimated increase up to 18HP and up to 20 ft.lbs. of Torque.
  • HEAR THE GROWL: K&N’s intake systems allow your engine to breathe and sound as it should- your engine will growl on acceleration and return to quiet once at speed.
  • DYNO TESTING YOU CAN TRUST: K&N air intake horsepower/torque testing is performed on wheel-based dynamometers and the reports are include with each intake system.
  • FEATURING K&N’s SIGNATURE, REUSABLE AIR FILTER: Combines 4 layers of pleated, breathable cotton with K&N’s red filter oil to absorb dirt and dust particles, allowing clean air to continue flowing into your engine, only needs cleaning every 100,000 miles under normal highway driving conditions.
  • DURABLE ROTO-MOLDED INTAKE TUBE & CUSTOM HEAT SHIELD: A high-density polyethylene (HDPE) rotationally-molded intake tube helps increase the volume of airflow to your engine, while the heat shield helps protect intake air from the high temperature of your engine bay.
Check Stock

K&N Cold Air Intake Kit: Increase Acceleration & Engine Growl, Guaranteed to Increase Horsepower up to 13HP: Compatible with 1.6L, L4, 2013-2017 Hyundai Veloster Turbo, 69-5312TS

  • GUARANTEED INCREASE IN HORSEPOWER & TORQUE: K&N cold air intake systems provide a less restrictive path for airflow, increasing the volume of cool, oxygen-rich air into your engine and giving an estimated increase up to 13HP and up to 16 ft.lbs. of Torque.
  • HEAR THE GROWL: K&N’s intake systems allow your engine to breathe and sound as it should- your engine will growl on acceleration and return to quiet once at speed.
  • DYNO TESTING YOU CAN TRUST: K&N air intake horsepower/torque testing is performed on wheel-based dynamometers and the reports are include with each intake system.
  • FEATURING K&N’s SIGNATURE, REUSABLE AIR FILTER: Combines 4 layers of pleated, breathable cotton with K&N’s red filter oil to absorb dirt and dust particles, allowing clean air to continue flowing into your engine, only needs cleaning every 100,000 miles under normal highway driving conditions.
  • DURABLE ALUMINUM INTAKE TUBE & CUSTOM HEAT SHIELD: For a more custom look under the hood, a mandrel-bent and powder coated aluminum intake tube helps increase the volume of airflow to your engine, while the heat shield helps protect intake air from the high temperature of your engine bay.
Check Stock

K&N Cold Air Intake Kit: Increase Acceleration & Engine Growl, Guaranteed to Increase Horsepower up to 19HP: Compatible with 6.2L, V8, 2010-2015 Chevy Camaro, 63-3074

  • GUARANTEED INCREASE IN HORSEPOWER & TORQUE: K&N cold air intake systems provide a less restrictive path for airflow, increasing the volume of cool, oxygen-rich air into your engine and giving an estimated increase up to 19HP and up to 19 ft.lbs. of Torque.
  • HEAR THE GROWL: K&N’s intake systems allow your engine to breathe and sound as it should- your engine will growl on acceleration and return to quiet once at speed.
  • DYNO TESTING YOU CAN TRUST: K&N air intake horsepower/torque testing is performed on wheel-based dynamometers and the reports are include with each intake system.
  • FEATURING K&N’s SIGNATURE, REUSABLE AIR FILTER: Combines 4 layers of pleated, breathable cotton with K&N’s red filter oil to absorb dirt and dust particles, allowing clean air to continue flowing into your engine, only needs cleaning every 100,000 miles under normal highway driving conditions.
  • DURABLE ROTO-MOLDED INTAKE TUBE & CUSTOM HEAT SHIELD: A high-density polyethylene (HDPE) rotationally-molded intake tube helps increase the volume of airflow to your engine, while the h....
Check Stock

K&N Cold Air Intake Kit: Increase Acceleration & Engine Growl, Guaranteed to Increase Horsepower up to 18HP: Compatible with 6.2L, V8, 2010-2015 Chevy Camaro SS, 69-4519TP

  • GUARANTEED INCREASE IN HORSEPOWER & TORQUE: K&N cold air intake systems provide a less restrictive path for airflow, increasing the volume of cool, oxygen-rich air into your engine an estimated increase up to 18HP and up to 18 ft.lbs. of Torque.
  • HEAR THE GROWL: K&N’s intake systems allow your engine to breathe and sound as it should- your engine will growl on acceleration and return to quiet once at speed.
  • DYNO TESTING YOU CAN TRUST: K&N air intake horsepower/torque testing is performed on wheel-based dynamometers and the reports are include with each intake system.
  • FEATURING K&N’s SIGNATURE, REUSABLE AIR FILTER: Combines 4 layers of pleated, breathable cotton with K&N’s red filter oil to absorb dirt and dust particles, allowing clean air to continue flowing into your engine, only needs cleaning every 100,000 miles under normal highway driving conditions.
  • DURABLE ALUMINUM INTAKE TUBE & CUSTOM HEAT SHIELD: For a more custom look under the hood, a mandrel-bent and mirror finish aluminum intake tube helps increase the volume of airflow to your engine,....
Check Stock

K&N Cold Air Intake Kit: Increase Acceleration & Engine Growl, Guaranteed to Increase Horsepower up to 13HP: Compatible 2.0L, L4, 2015-2019 Volkswagen (Arteon, Golf, Golf R, GTI, Alltrack), 69-9506TTK

  • GUARANTEED INCREASE IN HORSEPOWER & TORQUE: K&N cold air intake systems provide a less restrictive path for airflow, increasing the volume of cool, oxygen-rich air into your engine an estimated increase up to 13HP and up to 19 ft.lbs. of Torque.
  • HEAR THE GROWL: K&N’s intake systems allow your engine to breathe and sound as it should- your engine will growl on acceleration and return to quiet once at speed.
  • DYNO TESTING YOU CAN TRUST: K&N air intake horsepower/torque testing is performed on wheel-based dynamometers and the reports are include with each intake system.
  • FEATURING K&N’s SIGNATURE, REUSABLE AIR FILTER: Combines 4 layers of pleated, breathable cotton with K&N’s red filter oil to absorb dirt and dust particles, allowing clean air to continue flowing into your engine, only needs cleaning every 100,000 miles under normal highway driving conditions.
  • DURABLE ALUMINUM INTAKE TUBE & CUSTOM HEAT SHIELD: For a more custom look under the hood, a mandrel-bent and powder coated aluminum intake tube helps increase the volume of airflow to your engine,....
Check Stock

Universal Car Air Intake Pipe, 63mm 2.5\ Modified Air Intake Flexible Expansion Pipe Ducting Silicone Hose

  • Compatible with Universal Cold Air Intake fits for most vehicles with intake/tube/hose size 63mm/2.5inch.
  • Designed for Designed for discharging cold or hot air from car engine compartment and braking system. Air intake Expansion Pipe is very flexible ducting and easy installation.
  • Extendable Easy to buckle and good tensile. It can extend to 1 meter, easy to use. Air intake Expansion Pipe is very flexible ducting and easy installation.
  • Durable Made of high quality silicone. heat-resistant, excellent electric insulating and waterproof. Bore size 63mm. Please check the size before purchasing.
  • Quality Warranty Friendly return policy and customer service. Any questions, please feel free to contact with us.
Check Stock

K&N Cold Air Intake Kit: Increase Acceleration & Towing Power, Guaranteed to Increase Horsepower up to 11HP: Compatible with 5.7L, V8, 2019 Dodge Ram 1500, 63-1578

  • GUARANTEED INCREASE IN HORSEPOWER & TORQUE: K&N cold air intake systems provide a less restrictive path for airflow, increasing the volume of cool, oxygen-rich air into your engine an estimated increase up to 11HP and up to 15.5 ft.lbs. of Torque.
  • HEAR THE GROWL: K&N’s intake systems allow your engine to breathe and sound as it should- your engine will growl on acceleration and return to quiet once at speed.
  • DYNO TESTING YOU CAN TRUST: K&N air intake horsepower/torque testing is performed on wheel-based dynamometers and the reports are include with each intake system.
  • BETTER TOWING: Air intake kit improves acceleration and uphill performance when towing by improving throttle response and overall horsepower and torque.
  • FEATURING K&N’s SIGNATURE, REUSABLE AIR FILTER: Combines 4 layers of pleated, breathable cotton with K&N’s red filter oil to absorb dirt and dust particles, allowing clean air to continue flowing into your engine, only needs cleaning every 100,000 miles under normal highway driving conditions.
Check Stock

K&N Cold Air Intake Kit: Increase Acceleration & Towing Power, Guaranteed to Increase Horsepower up to 17HP: Compatible with 3.5L, V6, 2016-2019 Toyota Tacoma, 63-9039

  • GUARANTEED INCREASE IN HORSEPOWER & TORQUE: K&N cold air intake systems provide a less restrictive path for airflow, increasing the volume of cool, oxygen-rich air into your engine an estimated increase up to 17HP and up to 12.84 ft.lbs. of Torque.
  • HEAR THE GROWL: K&N’s intake systems allow your engine to breathe and sound as it should- your engine will growl on acceleration and return to quiet once at speed.
  • DYNO TESTING YOU CAN TRUST: K&N air intake horsepower/torque testing is performed on wheel-based dynamometers and the reports are include with each intake system.
  • BETTER TOWING: Air intake kit improves acceleration and uphill performance when towing by improving throttle response and overall horsepower and torque.
  • FEATURING K&N’s SIGNATURE, REUSABLE AIR FILTER: Combines 4 layers of pleated, breathable cotton with K&N’s red filter oil to absorb dirt and dust particles, allowing clean air to continue flowing into your engine, only needs cleaning every 100,000 miles under normal highway driving conditions.
Check Stock

K&N Cold Air Intake Kit: Increase Acceleration & Towing Power, Guaranteed to Increase Horsepower up to 12HP: Compatible with 5.0L, V8, 2011-2014 Ford F150, 57-2581

  • GUARANTEED INCREASE IN HORSEPOWER & TORQUE: K&N cold air intake systems provide a less restrictive path for airflow, increasing the volume of cool, oxygen-rich air into your engine and giving an estimated increase up to 12HP and up to 13 ft.lbs. of Torque.
  • HEAR THE GROWL: K&N’s intake systems allow your engine to breathe and sound as it should- your engine will growl on acceleration and return to quiet once at speed.
  • DYNO TESTING YOU CAN TRUST: K&N air intake horsepower/torque testing is performed on wheel-based dynamometers and the reports are include with each intake system.
  • BETTER TOWING: Air intake kit improves acceleration and uphill performance when towing by improving throttle response and overall horsepower and torque.
  • FEATURING K&N’s SIGNATURE, REUSABLE AIR FILTER: Combines 4 layers of pleated, breathable cotton with K&N’s red filter oil to absorb dirt and dust particles, allowing clean air to continue flowing into your engine, only needs cleaning every 100,000 miles under normal highway driving conditions.
Check Stock