Top Valve With Connection Fittings Reviews

Refrigerator Icemaker Water Solenoid Valve for Whirlpool Kenmore

Replacement for numbers AP3103467, PS358631, 2315576, 2315508, 2210436 and 2181702.
This Ice Maker Valve fits specific Whirlpool manufactured Side by Side Refrigerator models including Kitchenaid, Roper, Estate, Kirkland & Kennmore.
This valve is designed to replace a wide variety of single coil valves.
The valve has: 1/4″ male compression inlet. (Can be retro fitting from original garden hose type connection if present with fittings provided) 1/4″ male compression outlet is printed on the sticker of the valve & this is a replacement for and valves.
Included is Compression Union, Nut, Sleeve, Mounting Bracket, Screws and Tubing Inserts.

Check Stock

Watts Tankless Water Heater Service Valve Kit

TANKLESS WATER HEATER VALVE KIT: Watts LFTWH-FT-HCN service valve kit for tankless water heater valves simplify the installation, maintenance and operation of tankless water heaters..
SERVICE VALVE KIT FOR TANKLESS WATER HEATER: The tankless water heater service valve kit replaces up to 18 fittings and 16 connections used in typical tankless water heater installations, color-coded tee handle. Optional pressure relief and check valve..
MULTIPLE CONNECTION VALVE KIT: They are available in two valve sets or as a single valve with female threaded, union or quick-connect end options. The service valve kits are available with or without a relief valve. Facilitate service and maintenance with cold water inlet and hot water outlet valves certified to NSF/ANSI 61..
LEAD FREE VALVE KIT: The wetted surface of our Lead Free products contacted by consumable water contain less than one quarter of one percent (0.25 percent) of lead by weight..
WATER SERVICE VALVE KIT: Purge/drain ports allow regular cleaning to remove scale build-up. The kit includes LF4L - Lead free poppet type pressure relief valves for protection against excessive pressure and LFTWH - Lead Free Tankless Water Heater Valves..

Check Stock

Unisex Adult Steampunk Gas Mask Costume Accessory, Gold, One Size

TANKLESS WATER HEATER VALVE KIT: Watts LFTWH-FT-HCN service valve kit for tankless water heater valves simplify the installation, maintenance and operation of tankless water heaters..
SERVICE VALVE KIT FOR TANKLESS WATER HEATER: The tankless water heater service valve kit replaces up to 18 fittings and 16 connections used in typical tankless water heater installations, color-coded tee handle. Optional pressure relief and check valve..
MULTIPLE CONNECTION VALVE KIT: They are available in two valve sets or as a single valve with female threaded, union or quick-connect end options. The service valve kits are available with or without a relief valve. Facilitate service and maintenance with cold water inlet and hot water outlet valves certified to NSF/ANSI 61..
LEAD FREE VALVE KIT: The wetted surface of our Lead Free products contacted by consumable water contain less than one quarter of one percent (0.25 percent) of lead by weight..
WATER SERVICE VALVE KIT: Purge/drain ports allow regular cleaning to remove scale build-up. The kit includes LF4L - Lead free poppet type pressure relief valves for protection against excessive pressure and LFTWH - Lead Free Tankless Water Heater Valves..

Check Stock

LockNLube 90 Degree Grease Coupler Adapter

Spring-loaded collar for extra-sturdy connection.
Easily connect to LockNLube and other couplers when needed.
Three hardened steel jaws, rubber seal, and check valve make a tight, reliable connection.
Right angle adapter for hard-to-reach fittings.

Check Stock

NEW Replacement Part - GE Refrigerator Dual Solenoid inlet Water Valve Part# WR57X10051 by ERP

Replacement water inlet valve for GE part # WR57X10051 with easy connection fittings..
Easy to follow instructions are included..
This valve feeds both the water dispenser and the ice maker. Each function operates independently..

Check Stock

POOLHACKER Plunger Valve for Intex Pool Parts and Accessories, Shut Off Valve for for Above Ground Pool, Replacement Plunging Assembly for Intex Pool Fittings (1 Pack)…

【Awesome Design】One-step solution to on-the-stop, instant filter pump or filter cartridge changes. Replace your old plunger valve or upgrade to the Intex Plunger Valve system, which makes changing hoses and pumps a breeze!.
【Installation Requirements】①Requires an Intex Pool with 1.5" hose fittings to work properly. ②Purchase type B hose adapters or 1.5" threaded strainer connectors to install the plunger valve on the pool wall..
【Compatible】Works with the Intex 1500, 2500, and 4000 gallons per hour filtration pumps as well as the Intex Saltwater Chlorinator and Intex 2000 gallon per hour Chlorinator Pump Combo. Compatible with Intex, Bestway, and Coleman above ground pools with the same size of outlet/inlet connection..
【Safe & Efficient】The swimming pool parts are made of high quality plastic materials, which are sturdy and durable. Including Large Pool Plunger Valve Assembly for Intex / Bestway..
【100% RISK-FREE】POOLHACKER accessories for Intex Pool will work closely with other pool fittings to keep your pool running safely and efficiently. If you are not satisfied with the POOLHACKER pool accessories, please feel free to contact us at any time. Follow your heart, and add to your cart!.

Check Stock

Mudder Bpv31 Piercing Valve 134a Kit R134a Refrigerant Charge Hose with Gauge, Hose Refrigerant Can Tap with Gauge R134a Can Connect to R12/r22 Port Ac 1/2 and Universal Retrofit Valve with Dust Cap

... design that only requires a 2-inch clearance area for installation and use, and you only need 1 hex key wrench (included) to install the kit.
If you want to attach the gauge with BPV piercing tap valve, you need a retrofit valve (included).
R134a Charging hose: 19 inch hose with R-134a can to R-12/R-22 service port connection, 1/2 inch end fits R12, 22, 502 fittings.
And the gauge has scale readings for R134, R12, and 22. 90-degree push and lock coupler with auto shut off.
Replace model of BPV-31 piercing tap valve: AP4502525, BPV31D, GPV14, GPV31, GPV38, GPV56, MPV31.
Compatible with 1/4 inch, 5/16 inch, 3/8 inch outside diameter pipes.
Universal retrofit valve: the retrofit valve converts from R-12 to R-134a air conditioning system and suit for 7/16 inch low side port.
Suit for vehicles pre-1994, comes with R-134a refill fittings.

Check Stock

Habitech 2-Pack In-Line Barbed Ball Valve 13mm For 1/2 Inch Tubing .520 ID - Regulate and Shut-Off/On Water Flow

...any situation where fluid restriction is needed. For use with irrigation, aquarium plumbing, pump return line, saltwater applications, RV camper and trailers, pex tubing, hydroponics, and aquaponics..
Leak-Free Seal: These non-corrosive plastic flow valve fittings are guaranteed to provided a secure, watertight connection that handles an operating pressure of up to 45 PSI. Constructed to be wear-resistant to assure long term reliability of connections. Confidently install these barbed fittings without clamps by using our Valve Sizing Chart (see photo) to get the perfect fit. Match the ID (Inner Diameter) of your hose or tube with the acceptable IDs listed on the chart..

Check Stock

Valterra Flush King™ 45 Degree Reverse Flush Valve Attachment for RV, Camper, Trailer

SEWER TANK RINSER: Breaks up plugged tanks pipes and cleans tank, pipe, valve, drain hose.
FUNCTIONAL: Anti-siphon valve with internal backflow preventer protects the fresh water supply from possible backflow.
CLEAR CONSTRUCTION: Clear walls allow you to see when water is running clear.
45 DEGREE ANGLE: Ideal angled shape allows for easy draining.
LEAK-PROOF: Tight bayonet attachments with 360-degree swivel and pre-installed fittings ensure a leak-proof connection.

Check Stock

T. H. Marine Marine Thru-hull Fittings-extended Length Hose I.d. 3/4in. Black Black

THIS IN-LINE check valve can be used to keep your pump primed, increase pump lift or prevent backflow.
SUITABLE for use with manual or electric pumps. Must use hose clamps or PVC fittings.
HOSE FITS 1 inch or 1-1/2 inch (Stepped Connection). Type: Check Valve.
FIVE OCEANS, 40 YEARS developing High-Quality Marine & Outdoor Products.

Check Stock

6.0 High Pressure Oil Pump IPR Valve Air Test Fitting Tool, High Pressure Oil Rail Adapters Leak Test Kit and 6.0 IPR Valve Socket with Seal Kit Fit for Ford 6.0L Powerstroke Diesel Engine

...it fits for 2003-2010 Ford 6.0L V8 Diesel Turbocharged Modles.
High Quality: High Quality Machined from Brass or Steel with excellent mechanical and physical properties, these tool kit show their high tightness, corrosion resistance and durability.
Oil Rail Adapters: Both brass adapters use standard 1/4" NPT air hose connection, which allow observation of the High Pressure Oil System's Injector Control Pressure (ICP) by direct gauge connection, and facilitate testing of the High Pressure Oil System for leaks using shop air.
IPR Valve Air Test Fitting : This tool has 1/4 inch pipe threads to accept standard air fittings.
It takes the place of the IPR valve meaning that the system can be completely sealed so that even the smallest leaks can be detected.
6.0 IPR Valve Socket with Seal Kit: Use with 3/8" square drive, 12 point design socket can tightly locate your IPR valve in a very tight location, also built to bottom out on the hex so it does not put torque on the connector in case it can be reused (Include IPR Valve Seal Kit OE Number 3C3Z9H529A, AP0035).

Check Stock

Home bathroom decoration chrome-plated brass kitchen wall-mounted faucet, outdoor garden swimming pool faucet G1/2 interface

[Type of faucet]: kitchen sink faucet/bathroom basin/wash basin faucet/faucet for outdoor garden/faucet connection fittings/shower head/angle valve, triangle valve/connecting hose, etc..
[Environmentally friendly design]: Simple and environmentally friendly design without excessive waste. Simple face to life, not simple decoration of your home.
[Resist and reject metal lead pollution] Lead is a common industrial metal pollution that can cause harm to the human body, especially children, which is difficult to eliminate. Unknown products use ordinary materials, which are prone to problems and rust. The water quality is second to pollution and contains lead, which is harmful to the body..
[Material used]: Use high-quality brass and stainless steel metal materials, including environmentally friendly ABS plastic materials, good materials can ensure that customers use it for a longer time. High-quality ceramic valve chip with long service life. Including our connection accessories are also made of environmentally friendly materials..
[Free-hand installation saves time and effort] Fast installation with threaded interface, no need to ask others, just wrap raw tape and tighten it.

Check Stock

JIFETOR Fuel Injection Pump Pressure Tester Gauge Kit, Car Gasoline Gas Fuel Oil Injector Test Manometer Tool Set 0-100PSI, Universal for Auto Truck SUV Motorcycle ATV RV

...m (except for Bosch, CIS Jetronic, Throttle Body Systems on GM vehicles), not for diesel high pressure injection pump or high pressure fuel track on direct-injection engine, due to the fuel gauge's low pressure range. Test fuel pressure is an essential part of the troubleshooting process of fuel injection system..
3 CONNECTION TYPES FOR TU-113 FUEL PRESSURE GAUGE TOOL KIT: The set is equipped with various fittings and hoses to connect for testing. 14"L hose is used for hooking up directly to the 1/4" SAE standard Schrader valve on fuel pump, 11"L hose for the small Schrader valve (for some Ford), and 8"L hose for M6 fuel pressure test port. 1/4" barbed brass fittings is direct for special test outlet on engine, and aluminum tee splices in-line between the fuel pump and engine for most vehicles..
PRIMARY FUEL PRESSURE TEST KIT: Pressure gauge adopts rubber cover protected 2-3/4" large dial with 0-100psi/0-7bar range and dual color coded scale for easy reading. The hoses use rubber nylon resin material, and the build-in nylon can strengthen the hose with increased stress resistance. Please note, there is no pressure relief valve and drain hose, please wrap cloth around hose connection before relieving pressure from fuel line and removing testing componen....

Check Stock