Top Tube Fitting Reviews

Ham-Let Stainless Steel 316 Let-Lok Compression Fitting, Nut, 1/2\ Tube OD

Nut for connecting to a compression tube fitting.
Stainless steel 316 for higher strength and greater corrosion resistance than stainless steel 304.
Maximum operating temperature range of -100 to +1,000 degrees F.
Meets ASTM A213 and A269 standards for quality assurance.

Check Stock

Joywayus 3/8\ Tube OD Brass Ferrule Fittings Compression Sleeves Brass Compression Fitting(Pack of 50)

Size:3/8" Tube OD. Package included: 50pcs Compression Ferrule Sleeve. It is packed in plastic box to avoid product damage..
This Metals sleeve compression tube fitting is made of brass, connects to a tube, and is suitable for use with fuel and gas systems..
Sleeve for a tube compression fitting.Connects to copper, brass, aluminum, or plastic tubing. No flaring tool required for assembly..
3000 PSI working pressure, Temperature range of -65°F to 250°F (-53°C to 121°C).
These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..

Check Stock

Beduan Reducer Tri Clamp Ferrule Stainless Steel 304 Sanitary Fitting 2\ Tube OD to 1-1/2\ Tube OD (Pack of 1)

Reducer sanitary fitting can be used to connect two pipes of different diameters that are along the same pipe axis..
High quality 304 stainless steel, having durable and long service life..
Tube OD: reducing 2" tube OD to 1.5" tube OD - (51mm to 38mm tube OD)..
Tri clamp size: reducing 2" Tri Clamp / Clover / Sanitary to 1.5" Tri Clamp / Clover / Sanitary - (64mm to 51mm Ferrule OD)..
Fitting clamps to tubing on both ends for a non-permanent seal, providing take-down access..

Check Stock

EilxMag DOT Air Line Fittings Assortment, 44 Pcs Push to Connect Fittings NPT Male Thread & DOT Brass Air Brake Line Fittings Kit

【Premium Material】: Our air line fittings are made of PBT Plastic, the air brake brass fittings DOT approved are made of high quality CA360 brass, with corrosion resistance, high temperature ductility and low permeability. Great for long time use..
【Quantity】: Unique dot air line quick connect fittings nylon tubing kit: The plastic tube fittings contain 28 pieces: 8 pcs Male straight push connectors, 6 pcs Straight tube unions. 6 pcs 90 degree Elbows. 4 pcs 90 degree Elbows NPT thread. 4 pcs Tube tees. The brass tube fittings contain 16 pieces: 5 pcs Male connectors. 5 pcs Male 90° elbows. 3 pcs Tube tees. 3 pcs Tube unions. Fit type: 1/2", 3/8", 1/4"..
【Typical Application】: The push-to-connect fitting 1/4 inch are suitable for PU / PA / PE / PVC. The dot air fittings assortment can be used with air systems, and copper tubing in air brake systems. They are widely applied in automotive, manufacturing production lines, car or truck repair, industrial workshops, daily garden or lawn mower repair, towing machine hose connections and so on..
【Easy to install】: Our air fitting kit quicks....

Check Stock

Jonard Tools FDC-66 Fiber Optic Scraps Disposal Can

10 Pack Ceramic Tube Core Sleeves + 10 Pack Metal Insert Fitting Head Connectors..
Great to replace your old broken cermic tube and metal fitting connector..
20 Pieces/Set Fiber Optic Visual Fault Locator Replacement Parts Accessories..

Check Stock

2-in-1 Drip Irrigation Tubing Hole Punch & Fitting Insertion Tool Kit for Easier 1/4' Inch Fitting & Emitter Insertion Drip Sprinkler Systems (Blue)

2-In-1 Punch and Fitting Insert: The drip irrigation hole punch tool is designed to fit for drip tubing punch and 1/4 fitting insertion use.
Hold the handle of the drip irrigation tubing punch and clamp the tube, gently press it until the tube is pierced.
The hole size is 4 mm/ 0.12 inch to ensure the proper insertion of the connector, fitting and emitter, making the installation more closely fitting..
Quality Material: Punch tools are maded made of high-quality plastic and metal, strong and durable, and the puncher has been polished so it will not become dull And can be used for a long time..
Application: This 2-in-one drip irrigation tubing hole punch & fitting insertion tool can be used to puncture holes when installing drippers and micro-sprinklers in polyethylene tubing..
Easy to Use: Simply press the tool through the tubing and then remove the punch tool with a pre-punched hole left.
Insert the fitting into the tubing, then slide the tubing according to the slot and push the fitting into pre-cut hole..
Humanized Design: The smartly designed fitting insertion tool will make you feel untired even after using it for a long time.
It can help you drill easily and fast and save time and energy for you.
The combination of blue and black color makes the dr....

Check Stock

FORD part# 7L3Z-7A785-A Auto Hub Lock Operating Vacuum Tube OEM BRAND NEW

2004-2008 Ford F150 4×4 Auto Hub Lock Connector Vacuum Line Fitting Tee Tube OEM.
(4WD) 4×4 Front Auto Hub Locks, Vacuum Line Fitting Tee Tube Connector.

Check Stock

RAINPAL SSBF010 Stainless Steel Bulkhead Fitting (Female 3/4\ NPS, Left Handed Nut) (2)

Size and Number of Pieces: 1/4" 10pcs 3/8" 10pcs 1/2" 10pcs Tube OD.
Working Pressure Range: Maximum up to 150PSl. Working Temperature Range: '-40℉ to +200℉(-40℃ to +93℃).
Applications: Used with SAE J844 Type A and Type B nylon tubing in air brake system, or in cab air controls, except for where temperature is under -40℉(-40℃) or above +200℉(+93℃)or where battery acid can drip on tubing..
Advantages: Meet D.O.T.FMVSS 571.106 air brake specifications. Meet functional requirements of the SAE 246 & SAE J1131. Machined from CA360 brass. Easy to assemble (no tube preparation or flaring required.) Built in tube support. Can be used with copper tubing by NTA body with long nut and spherical sleeve. Insert should be removed.
Assembly Instructions: 1. Cut tubing as flat as you can. Maximum 15°angle is allowed. 2.Check the port of the mating part free of burrs or debris. 3.Slide sleeve and then nut on the tubing. 4. Insert the preassembled fitting into the tubing and the tubing should be bottomed to the seat of the fitting. 5. Tighten the nut by wrench until one thread remains visible of the fitting body..

Check Stock

Malida 1/2\ Thread Male to 1/4\ Push Fit Tube Quick Connect for Water Purifiers Reverse Osmosis (5pack)

Product Name: Straight 1/2“Npt to 1/4" Tube OD Push-in Connect Fittings,1/2" Male Thread Connector Adapter..
Easy Installation: New generation Non-Locking Clip technology offers an easy Diy Installation Without Tools Required, Just Push In to Connect..
Package Included: 1/2"Npt to 1/4" Tube OD Push To Connect Fitting,5 pcs..
Applications Include RO System Beverage Dispensing Refrigerator Ice Maker Coffee Machine etc..
Size&Tube Compatible With:1/4 inch Quick Connect fitting Size,Fits standard 1/4 od Tubing Used On Most Water Purification Systems..

Check Stock

Yeswelder Argon/CO2 Mig Tig Flow Meter Gas Regulator Gauge Welding Weld

Wide Application：Has CGA - 580 Tank fitting so it will screw right into the Argon, Argon/CO2Tanks. Ideal choice for MIG TIG welding, chemical and electronics industry.
Accurate Gas Flow Gague：The Square flow tube reads from 0 - 60 CFH, which is indicated by a ball which moves up and down in the flow tube.And has large 1 1/2" diameter pressure gauge which reads from 0 - 4000 PSI. Easy to read, accurate.
Multiple Outlet：Will fit both the female 9/16" x 18 nut or the male 5/8" x 18 fitting. It also comes with a standard 1/4" barbed fitting.
Design：Combination of regulator and flow meter.
Two Connection Ways：You can choose the connection method according to your needs.

Check Stock

Frienda 12 Pieces 3/8 Inch-24 Threads Brake Line Fittings Assortment for 3/16 Inch Tube (4 Unions, 8 Nuts)

Fit for: the unions measures approx. 0.6 x 0.9 inch, the nut measures approx. 0.67 x 3/8 inch, fit for most common inverted flare or double flare sizes for 3/16 inch tube, for use with 3/16 inch steel, poly coated or copper brake lines.
Please confirm the size of the details according to the picture before purchasing.
Size and material: both the unions and nuts are metric 3/8-24 threads (regular 3/16 inch tube fitting size), all brake line fittings are made of quality brass to prevent rust and plated for corrosion resistance.
You will get: 12 pieces brake line fittings in the package, include 4 pieces unions and 8 pieces nuts, you can share them with your family and friends, these tubes unions are good fittings.
Inverted flare union: these unions are a nice option to join 2 (3/16 inch) brake lines together.
Brake line fitting connect: the nut is called the fitting for 3/16 inch tube, these unions fittings have a hex size of 3/8 inch and the threads are 3/8 inch with a thread pitch of 24.

Check Stock

Decibullz Custom Molded Security Radio Surveillance Earpiece Set, Thermo-Fit Designed for Clear Acoustic Tube Radios, Awareness…

CUSTOM TWO-WAY RADIO EARPIECE: Our top-rated Decibullz +Awareness radio surveillance earpieces connect easily with clear acoustic tubes for a perfect-fitting two-way radio headset that will stay in place no matter the environment..
FULL SITUATIONAL AWARENESS: Enabling high situational awareness, these earpiece adapters fit all clear tube acoustic tubing with a diameter of 1/8" (other sizes may or may not work), so you can hear radio communication clearly while still allowing sound from your surroundings and fellow first responders to pass through..
TWO-WAY COMPATIBILITY: Works with all surveillance and security clear tube earpieces for two-way radio headsets and microphones from Motorola, Kenwood, Midland, Vertex, Icon, Cobra, Dewalt RCA, and Baofeng. Excellent for law enforcement, EMS, military, SWAT, and more..
QUICK & EASY FITTING PROCESS: Using a patented thermoplastic, the fitting process is quick and easy. Simply heat the earpiece molds in boiling hot water, snap the adapter and earpieces onto your clear tube radio, and shape them to your ears. Decibullz are also remoldable, so you can keep molding them until you get the exact fit you are looking for..

Check Stock

Decibullz Custom Molded Security Radio Surveillance Earpiece Set, Thermo-Fit Designed for Clear Acoustic Tube Radios, Isolation

CUSTOM TWO-WAY RADIO EARPIECE: Our top-rated Decibullz +Isolation radio surveillance earpieces connect easily with clear acoustic tubes for a perfect-fitting two-way radio headset that will stay in place no matter the environment..
SOUND ISOLATION IN LOUD ENVIRONMENTS: Designed to reduce noise in consistently loud environments, our +Isolation earpiece adapters fit all clear tube acoustic tubing with a diameter of 1/8″ (other sizes may or may not work), so you can focus on your radio and not what’s around you..
TWO-WAY COMPATIBILITY: Works with all surveillance and security clear tube earpieces for two-way radio headsets and microphones from Motorola, Kenwood, Midland, Vertex, Icon, Cobra, Dewalt RCA, and Baofeng. Excellent for concert and event security, gaming surveillance, secret service, sports, and more..
QUICK & EASY FITTING PROCESS: Using a patented thermoplastic, the fitting process is quick and easy. Simply heat the earpiece molds in boiling hot water, snap the adapter and earpieces onto your clear tube radio, and shape them to your ears. Decibullz are also remoldable, so you can keep molding them until you get the exact fit you are looking for..

Check Stock