Top Brass Tube Fitting Reviews

Cole-Parmer-3121270 Compression Ferrule and Nut Assembly, for 1/4\ OD, Brass

This Joywayus compression fitting is made of brass..
Connects to 4mm copper,brass,aluminum,or plastic tubing..
Brass for corrosion resistance,ductility at high temperatures,and low magnetic permeability..

Check Stock

Litorange 3 Pack Metal Brass Compression Tube Pipe Fitting Connector, Straight Coupling Adapter, 3/8\ Tube OD x 1/2\ NPT Male

★ 【Material】: Heavy Duty Brass,strong and durable. Size: 3/8" Tube OD x 1/2" inch NPT Male Adapter..
★ 【Firm And Durable】: Litorange Brass for corrosion resistance, high temperature ductility and low magnetic permeability..
★ 【Function】: Fitting connects to tubing on one end and has an NPT male connector on the other. Use with copper, brass, aluminum, or plastic tubing..
★ 【Tips】: Single ferrule compression fitting has fewer possible leak paths than twin ferrule fittings. Primary uses water, gasoline, oil and vacuum lines..
★ 【Package Include】: 3 PCS 3/8" Tube OD x 1/2" NPT Male connector. Comes with 1 year warranty..

Check Stock

MroMax Brass Compression Tube Fitting-6mm /0.24\ ID Male Thread Pipe Adapter for Water Irrigation System 3Pcs

【Product Size】Inner Diameter (I.D.): 6mm / 0.24".
【Material】Brass Compression Tube Fitting is made of brass. Brass for corrosion resistance, ductility at high temperature and low magnetic permeability..
【Feature】Can be used with copper, brass, aluminum and plastic tubing. Twin ferrule compression fitting for a leak-resistant seal in high-pressure applications..
【Note】Only used for irrigation or hydraulic systems, NOT allowed to be installed for potable water..
【Wide Application】Widely used in residential and commercial usage..

Check Stock

MroMax Brass Compression Tube Fitting-6mm /0.24\ ID Male Thread Pipe Adapter for Water Irrigation System 1Pcs

【Product Size】Inner Diameter (I.D.): 6mm / 0.24".
【Material】Brass Compression Tube Fitting is made of brass. Brass for corrosion resistance, ductility at high temperature and low magnetic permeability..
【Feature】Can be used with copper, brass, aluminum and plastic tubing. Twin ferrule compression fitting for a leak-resistant seal in high-pressure applications..
【Note】Only used for irrigation or hydraulic systems, NOT allowed to be installed for potable water..
【Wide Application】Widely used in residential and commercial usage..

Check Stock

MroMax Brass Compression Tube Fitting-8mm /0.31\ ID Male Thread Pipe Adapter for Water Irrigation System 3Pcs

【Product Size】Inner Diameter (I.D.): 8mm / 0.31".
【Material】Brass Compression Tube Fitting is made of brass. Brass for corrosion resistance, ductility at high temperature and low magnetic permeability..
【Feature】Can be used with copper, brass, aluminum and plastic tubing. Twin ferrule compression fitting for a leak-resistant seal in high-pressure applications..
【Note】Only used for irrigation or hydraulic systems, NOT allowed to be installed for potable water..
【Wide Application】Widely used in residential and commercial usage..

Check Stock

uxcell Brass Compression Tube Fitting 10mm OD Tee Pipe Adapter for Garden Water Irrigation System

Fitting Tube Size: 10mm / 0.39" Outer Diameter (O.D.).
Brass for corrosion resistance, ductility at high temperature and low magnetic permeability..
Can be used with copper, brass, aluminum and plastic tubing. Twin ferrule compression fitting for a leak-resistant seal in high-pressure applications..
NOTE: Only used for irrigation or hydraulic systems, NOT allowed to be installed for potable water..

Check Stock

Bulkhead Union Push to Connect Tube Fitting 3/8 In Tube OD Stainless Steel Double Threaded 5 Packs

Bulkhead Fitting Push Connector Type : 3/8 inch, Tube OD 3/8 inch NPT.
Bulkhead Fitting Type: Push In Straight Male Connector.
Body:Nickel Plated Brass Seal, O-Ring NBR.
Bulkhead Fitting Features: high pressure resistant and non tripping, all taper pipe threads are paint Teflon leakage-proof rubber, offering good seal property.
Push Fittings are easy to install, flexible and space-saving, 360-degree rotate freely, Release rings adopt ellipse design, which can be removed conveniently.
Fluid Admitted: Air, Vacuum, Water (No Freezing).
Negative Pressure-100Kpa | -29.5 In Hg. Working Temperature: 0-60¡ãC | 32¡«140¡ãF. Applicable Tube:PU / PA / PE / PVC.

Check Stock

RAINPAL SSBF010 Stainless Steel Bulkhead Fitting (Female 3/4\ NPS, Left Handed Nut) (2)

Size and Number of Pieces: 1/4" 10pcs 3/8" 10pcs 1/2" 10pcs Tube OD.
Working Pressure Range: Maximum up to 150PSl. Working Temperature Range: '-40℉ to +200℉(-40℃ to +93℃).
Applications: Used with SAE J844 Type A and Type B nylon tubing in air brake system, or in cab air controls, except for where temperature is under -40℉(-40℃) or above +200℉(+93℃)or where battery acid can drip on tubing..
Advantages: Meet D.O.T.FMVSS 571.106 air brake specifications. Meet functional requirements of the SAE 246 & SAE J1131. Machined from CA360 brass. Easy to assemble (no tube preparation or flaring required.) Built in tube support. Can be used with copper tubing by NTA body with long nut and spherical sleeve. Insert should be removed.
Assembly Instructions: 1. Cut tubing as flat as you can. Maximum 15°angle is allowed. 2.Check the port of the mating part free of burrs or debris. 3.Slide sleeve and then nut on the tubing. 4. Insert the preassembled fitting into the tubing and the tubing should be bottomed to the seat of the fitting. 5. Tighten the nut by wrench until one thread remains visible of the fitting body..

Check Stock

Beduan Brass Compression Fitting, Insert Tube Support Compression Sleeve Fitting 1/4\ Tube ID (Pack of 10)

...ade of brass, these compression sleeves ferules are lightweight material but good toughness, high strength, features corrosion resistance and wear resistancee, strong pressure resistance, they are also very easy to assemble. Good sealing performance, no leaks..
✅[FERRULE DESIGN] It is very practical for the tubing fitting. Like cylindrical shaped, bulging in the middle but two edges’s diameter are smaller than the belly part so that it could ensure the reliability of a compression seal..
✅[HOW IT WORKS] Insert the tubing into the end of the fitting and then tighten it with the nut or screw and then forcing the ferrule into the fitting body. The ferrule design is very practical for the tubing. Like cylindrical shaped, it is bulging in the middle but two edges’s diameter are smaller than the belly part so that it could ensure the reliability of a compression seal..
✅[APPLICATION] Since these brass compression fittings are good to create the most reliable seal, they can be see anywhere in systems from gas lines in refineries, to the plumbing under your sink, water heater in your home or a pipe transporting thing or your plumbing devices. They are used for fixed locking of copper pipe and hard pipe, PU tube, nylon tube or hard plastic tubing.....

Check Stock

Joywayus Compression Sleeve Ferrules 4mm Tube OD 2.9mm Tube ID Brass Compression Fitting and Insert Tube Ferrule Kit(Pack of 60)

Package include:30pcs sleeve ferrules+30pcs inserts..
Durable and high standard brass compression fitting..
Brass for corrosion resistance,ductility at high temperatures,and low magnetic permeability..
Commonly used to connect lines for air,water,fuel,oil and inert gases in a quick and simple way..

Check Stock

Hilitchi 8Sizes Tube OD 4mm-16mm Brass Compression Sleeves Ferrules Compression Fitting Kit Metric 220Pcs

...de of brass, these compression sleeves ferules are lightweight material but good toughness, high strength, features corrosion resistance and wear resistancee, strong pressure resistance, they are also very easy to assemble. Good sealing performance, no leaks..
✅ [FERRULE DESIGN] It is very practical for the tubing fitting. Like cylindrical shaped, bulging in the middle but two edges’s diameter are smaller than the belly part so that it could ensure the reliability of a compression seal..
✅ [HOW IT WORKS] Insert the tubing into the end of the fitting and then tighten it with the nut or screw and then forcing the ferrule into the fitting body. The ferrule design is very practical for the tubing. Like cylindrical shaped, it is bulging in the middle but two edges’s diameter are smaller than the belly part so that it could ensure the reliability of a compression seal..
✅ [APPLICATION] Since these brass compression fittings are good to create the most reliable seal, they can be see anywhere in systems from gas lines in refineries, to the plumbing under your sink, water heater in your home or a pipe transporting thing or your plumbing devices. They are used for fixed locking of copper pipe and hard pipe, PU tube, nylon tube or hard plastic tubin....

Check Stock

Hilitchi 3Sizes Tube OD 1/4 5/16 3/8 Brass Compression Sleeves Ferrules Compression Fitting Kit (SAE, 105Pcs)

...ade of brass, these compression sleeves ferules are lightweight material but good toughness, high strength, features corrosion resistance and wear resistancee, strong pressure resistance, they are also very easy to assemble. Good sealing performance, no leaks..
✅[FERRULE DESIGN] It is very practical for the tubing fitting. Like cylindrical shaped, bulging in the middle but two edges’s diameter are smaller than the belly part so that it could ensure the reliability of a compression seal..
✅[HOW IT WORKS] Insert the tubing into the end of the fitting and then tighten it with the nut or screw and then forcing the ferrule into the fitting body. The ferrule design is very practical for the tubing. Like cylindrical shaped, it is bulging in the middle but two edges’s diameter are smaller than the belly part so that it could ensure the reliability of a compression seal..
✅[APPLICATION] Since these brass compression fittings are good to create the most reliable seal, they can be see anywhere in systems from gas lines in refineries, to the plumbing under your sink, water heater in your home or a pipe transporting thing or your plumbing devices. They are used for fixed locking of copper pipe and hard pipe, PU tube, nylon tube or hard plastic tubing.....

Check Stock

Frienda 12 Pieces 3/8 Inch-24 Threads Brake Line Fittings Assortment for 3/16 Inch Tube (4 Unions, 8 Nuts)

Fit for: the unions measures approx. 0.6 x 0.9 inch, the nut measures approx. 0.67 x 3/8 inch, fit for most common inverted flare or double flare sizes for 3/16 inch tube, for use with 3/16 inch steel, poly coated or copper brake lines.
Please confirm the size of the details according to the picture before purchasing.
Size and material: both the unions and nuts are metric 3/8-24 threads (regular 3/16 inch tube fitting size), all brake line fittings are made of quality brass to prevent rust and plated for corrosion resistance.
You will get: 12 pieces brake line fittings in the package, include 4 pieces unions and 8 pieces nuts, you can share them with your family and friends, these tubes unions are good fittings.
Inverted flare union: these unions are a nice option to join 2 (3/16 inch) brake lines together.
Brake line fitting connect: the nut is called the fitting for 3/16 inch tube, these unions fittings have a hex size of 3/8 inch and the threads are 3/8 inch with a thread pitch of 24.

Check Stock