Top Towing Trailer Reviews

Shocker 20K Impact Max Cushion Hitch Combo Ball & Sway Control Towing Kit, Fits 2\ Hitch 2 Sway Arms

  • Sway Control Kit: Cushions road shock & reduces trailer sway for a smooth, safe, and straight towing experience. Dual Cushion Design: Built in dual rubber bump cushions. Shock Absorbing: Dual bump cushion design absorbs road shock. Great for HD towing..
  • Sway Tab Combo Ball Mount: 1 piece construction with 2" and 2-5/16" trailer hitch ball with welded sway tabs. Friction Sway Control Bar Kit Options: Order with 1 Sway Arm Kit for use with Trailer up to 10K lbs. Order with 2 Sway Arm Kits for use with Trailers over 10K lbs. Great for reducing trailer sway: Use 1 system for trailers under 10K and 2 systems for trailers over 10K. Adjustable Friction Bar: Can be adjusted to fine-tune your towing experience..
  • 20,000 lbs Heavy Duty Capacity: 20,000 lbs towing capacity and a 2,000 lbs tongue weight. (can vary by mount) Combo Ball Mount Tow Rating: 2" ball rated at 16,000 lbs & 2-5/16" ball rated at 8,000 lbs. Max Black Textured Finish: Impact resistant super durable textured matte black powder coated finish of base frame..
  • Includes complete adjustable Shocker impact max cushion hitch base frame assembly, combo dual ball mount with 2" & 2-5/16" hitch balls & 2 sway bar tabs, 2 ball mount pins & one or two friction sway control arm kits. 10+ Ball Mount Option....
Check Stock

CURT 45155 Fusion Trailer Hitch Mount with 2-Inch Ball & Pin Fits 2-In Receiver 7,500 lbs 2 Rise black

  • DEPENDABLE STRENGTH. Rated to tow 7,500 pounds gross trailer weight and 750 pounds tongue weight, this welded, one-piece ball hitch offers dependability for your towing (limited to lowest-rated towing component).
  • VERSATILE USE. This trailer hitch ball mount comes with a 2-inch x 2-inch shank to fit virtually any industry-standard 2-inch receiver. The ball mount also has a 2-inch rise to promote level towing with your own particular vehicle-trailer setup.
  • SECURE TOWING. Hitching up your trailer is easy with this ready-to-use trailer hitch ball mount. It comes with a welded 2-inch diameter tow ball for ready coupling and a trailer hitch pin to securely mount onto your hitch receiver.
  • CORROSION-RESISTANT. For long-lasting use, this ball hitch is protected with a durable black powder coat finish, and the trailer ball has a polished chrome plating. These finishes resist damage from rain, dirt, snow, road salt and other corrosive threats.
  • EASY TO INSTALL. To install the trailer hitch ball mount on your vehicle, simply insert the shank into your vehicle's 2-inch hitch receiver. The rounded shank, included hitch pin and welded trailer ball make installation easy.
Check Stock

CURT 45152 Fusion Trailer Hitch Mount with 1-7/8-Inch Ball & Pin, Fits 2-Inch Receiver, 5,000 lbs, 2-In Rise

  • DEPENDABLE STRENGTH. Rated to tow 5,000 pounds gross trailer weight and 500 pounds tongue weight, this welded, one-piece ball hitch offers dependability for your towing (limited to lowest-rated towing component).
  • VERSATILE USE. This trailer hitch ball mount comes with a 2-inch x 2-inch shank to fit virtually any industry-standard 2-inch receiver. The ball mount also has a 2-inch rise to promote level towing with your own particular vehicle-trailer setup.
  • SECURE TOWING. Hitching up your trailer is easy with this ready-to-use trailer hitch ball mount. It comes with a welded 1-7/8-inch diameter tow ball for ready coupling and a trailer hitch pin to securely mount onto your hitch receiver.
  • CORROSION-RESISTANT. For long-lasting use, this ball hitch is protected with a durable black powder coat finish, and the trailer ball has a polished chrome plating. These finishes resist damage from rain, dirt, snow, road salt and other corrosive threats.
  • EASY TO INSTALL. To install the trailer hitch ball mount on your vehicle, simply insert the shank into your vehicle's 2-inch hitch receiver. The rounded shank, included hitch pin and welded trailer ball make installation easy.
Check Stock

CURT 45131 Fusion Trailer Hitch Mount with 1-7/8-Inch Ball & Pin, Fits 2-Inch Receiver, 5,000 lbs, 2-In Drop

  • DEPENDABLE STRENGTH. Rated to tow 5,000 pounds gross trailer weight and 500 pounds tongue weight, this welded, one-piece ball hitch offers dependability for your towing (limited to lowest-rated towing component).
  • VERSATILE USE. This trailer hitch ball mount comes with a 2-inch x 2-inch shank to fit virtually any industry-standard 2-inch receiver. The ball mount also has a 2-inch drop to promote level towing with your own particular vehicle-trailer setup.
  • SECURE TOWING. Hitching up your trailer is easy with this ready-to-use trailer hitch ball mount. It comes with a welded 1-7/8-inch diameter tow ball for ready coupling and a trailer hitch pin to securely mount onto your hitch receiver.
  • CORROSION-RESISTANT. For long-lasting use, this ball hitch is protected with a durable black powder coat finish, and the trailer ball has a polished chrome plating. These finishes resist damage from rain, dirt, snow, road salt and other corrosive threats.
  • EASY TO INSTALL. To install the trailer hitch ball mount on your vehicle, simply insert the shank into your vehicle's 2-inch hitch receiver. The rounded shank, included hitch pin and welded trailer ball make installation easy.
Check Stock

CURT 99308 Class 3 Trailer Hitch 2-Inch Receiver 4-Pin Wiring Harness Select Subaru Outback

  • COMPLETE KIT. This towing kit includes a class 3 hitch with hardware and a wiring harness to provide a complete kit for outfitting your vehicle for towing. Both the hitch and wiring are designed for select models of the Subaru Outback..
  • DEPENDABLE STRENGTH. This trailer hitch is rated for 4, 000 lbs. gross trailer weight and 600 lbs. tongue weight (limited to lowest-rated towing component)..
  • VERSATILE DESIGN. This class 3 hitch equips your vehicle with a standard 2-inch x 2-inch hitch receiver, allowing for a wide variety of towing options. It can accept a ball mount, cargo carrier, bike rack, tow hook and much more..
  • RUST, CHIP, UV-RESISTANT. This tow hitch is protected with a unique dual-coat finish of rust-resistant liquid Bonderite and highly durable black powder coat. The two finishes are co-cured together for exceptional resistance to rust, chipping and UV rays..
  • EASY TO INSTALL. No cutting! No splicing! The trailer wiring harness in this kit plugs into existing factory wiring on your vehicle and equips it with a standard 4-pin trailer wiring connector for plugging in and towing a trailer. It connects the taillights, turn signals and brake lights..
Check Stock

CURT Class 3 Trailer Hitch Bundle with Wiring for 2014-2016 Toyota Highlander - 13200 & 56217

  • COMPLETE KIT. This towing kit includes a class 3 hitch with hardware and a wiring harness to provide a complete kit for outfitting your vehicle for towing. Both the hitch and wiring are designed for select models of the Toyota Highlander..
  • DEPENDABLE STRENGTH. This trailer hitch is rated for 6, 000 lbs. gross trailer weight, 900 lbs. tongue weight, 8, 000 lbs. weight distribution capacity and 900 lbs. weight distribution tongue weight (limited to lowest-rated towing component)..
  • VERSATILE DESIGN. This class 3 hitch equips your vehicle with a standard 2-inch x 2-inch hitch receiver, allowing for a wide variety of towing options. It can accept a ball mount, cargo carrier, bike rack, tow hook and much more..
  • RUST, CHIP, UV-RESISTANT. This tow hitch is protected with a unique dual-coat finish of rust-resistant liquid Bonderite and highly durable black powder coat. The two finishes are co-cured together for exceptional resistance to rust, chipping and UV rays..
  • EASY TO INSTALL. No cutting! No splicing! The trailer wiring harness in this kit plugs into existing factory wiring on your vehicle and equips it with a standard 4-pin trailer wiring connector for plugging in and towing a trailer. It connects the taillights, turn signals and brake lights..
Check Stock

Curt 13068 55336 Class 3 Trailer Hitch and Wiring Kit for Honda Odyssey

  • COMPLETE KIT. This towing kit includes a class 3 hitch with hardware and a wiring harness to provide a complete kit for outfitting your vehicle for towing. Both the hitch and wiring are designed for select models of the Buick Enclave, Chevrolet Traverse and GMC Acadia..
  • DEPENDABLE STRENGTH. This trailer hitch is rated for 5, 000 lbs. gross trailer weight, 500 lbs. tongue weight, 6, 000 lbs. weight distribution capacity and 600 lbs. weight distribution tongue weight (limited to lowest-rated towing component)..
  • VERSATILE DESIGN. This class 3 hitch equips your vehicle with a standard 2-inch x 2-inch hitch receiver, allowing for a wide variety of towing options. It can accept a ball mount, cargo carrier, bike rack, tow hook and much more..
  • RUST, CHIP, UV-RESISTANT. This tow hitch is protected with a unique dual-coat finish of rust-resistant liquid Bonderite and highly durable black powder coat. The two finishes are co-cured together for exceptional resistance to rust, chipping and UV rays..
  • EASY TO INSTALL. No cutting! No splicing! The trailer wiring harness in this kit plugs into existing factory wiring on your vehicle and equips it with a standard 4-pin trailer wiring connector for plugging in and towing a trailer. It connects the taillights, turn signals ....
Check Stock

Shocker HD Air Hitch with Dual Ball Mount - 2 & 2 5/16 inch Balls - 20,000 lbs - Fits Chevy Silverado / GMC Sierra 2500 3500 (2015-2023), Fits 2-1/2\ Hitch

  • Built in heavy-duty airbag gives you smoother safer trailer towing. Improves your ride, reduces wear & tear on pickup & trailer. Instant air ride towing for your pickup & trailer. Built in airbag cushions ride & absorbs road shock.
  • Air ride technology filters road shock through built in air spring bag and cushions the ride. Fine tune for your towing weight. Just add air for heavier loads. The air bag sits under receiver tube. Adjust the air pressure for the best ride and load control..
  • 20,000 lbs towing capacity & 2,000 lbs tongue weight. 8 Adjustment Holes for 1/2 to 4-1/2 inches of drop. Includes Combo Hitch Balls - 2" and 2 5/16" - Just flip around when pulling trailers with different couplers. Combo ball rated 16,000 gtw & 1,600 tw for 2-5/16 ball and 8,000 gtw for 2" ball.Choose 2" or 2-1/2" receiver hitch shank.
  • Includes Shocker HD air bumper hitch base frame, adjustable combo ball (2" & 2-5/16" ball) along with 2 D-handle ball mount pins. Made in the USA by Shocker Hitch, Arthur, ND. 10+ Ball Options (Sold Separately).
  • Safety Notice: The Shocker Hitch is a heavy duty unit that in most cases exceeds factory towing weight capacities, therefore it is imperative that you always read and follow the tongue and towing weight recommendations of the truck ....
Check Stock

CURT 99310 Class 3 Trailer Hitch 2-Inch Receiver 4-Pin Wiring Harness Select Honda Pilot

  • COMPLETE KIT. This towing kit includes a class 3 hitch with hardware and a wiring harness to provide a complete kit for outfitting your vehicle for towing. Both the hitch and wiring are designed for select models of the Honda Pilot..
  • DEPENDABLE STRENGTH. This trailer hitch is rated for 6, 000 lbs. gross trailer weight, 900 lbs. tongue weight, 8, 000 lbs. weight distribution capacity and 900 lbs. weight distribution tongue weight (limited to lowest-rated towing component)..
  • VERSATILE DESIGN. This class 3 hitch equips your vehicle with a standard 2-inch x 2-inch hitch receiver, allowing for a wide variety of towing options. It can accept a ball mount, cargo carrier, bike rack, tow hook and much more..
  • RUST, CHIP, UV-RESISTANT. This tow hitch is protected with a unique dual-coat finish of rust-resistant liquid Bonderite and highly durable black powder coat. The two finishes are co-cured together for exceptional resistance to rust, chipping and UV rays..
  • EASY TO INSTALL. No cutting! No splicing! The trailer wiring harness in this kit plugs into existing factory wiring on your vehicle and equips it with a standard 4-pin trailer wiring connector for plugging in and towing a trailer. It connects the taillights, turn signals and brake lights..
Check Stock

CZC AUTO 12V LED Magnetic Towing Light Kit for Boat Trailer RV Truck - Magnetic Strength 55 Pounds

  • STRONG MAGNETS: CZC AUTO 55 pounds magnetic trailer lights for towing holded so firmly to automobile metal surfaces, the lights will not fell off during working. You could also tie them to the trailer with zip ties if you need. Protective label on the base avoid surface scratches. Strong magnet but easy to remove by adult when you don't need them.
  • 2 SIDED TOWING LIGHTS: With 4.25'' red & amber lens, our magnet trailer lights work on both side, red on the back, amber on the front. Our portable trailer lights can be seen in the rear-view mirror, so you could check if they are working when you are driving. 12V wiring easily connect to most automotive electrical systems, great for cargo trailers, boat, ATVs, snowmobiles, and campers.
  • WORK OUT OF BOX: Use our towing lights with no splicing, the only wiring you might to do is on the tow vehicle. Wire distance between lights is 7'/84'', ideal for towing applications up to 80'' wide like trailer, truck, RV etc.. Wire harness length between 4 standard pin male connector and light unit is 20'/240'', easily connect. We offer 4 Quick Splice Wire Terminals for quick spli....
Check Stock

CURT 13394 Class 3 Trailer Hitch, 2-Inch Receiver, Fits Select Lexus RX350L, Toyota Highlander

  • It is a Class III Hitch with a 2” Tube and includes the 4 pin Wiring Harness. This item does NOT contain a trailer ball and hitch pin & clip. This item ONLY contains the hitch and harness..
  • DEPENDABLE STRENGTH. This trailer hitch is rated for 3, 500 lbs. gross trailer weight, 525 lbs. tongue weight, 4, 000 lbs. weight distribution capacity and 525 lbs. weight distribution tongue weight (limited to lowest-rated towing component)..
  • VERSATILE DESIGN. This class 3 hitch equips your vehicle with a standard 2-inch x 2-inch hitch receiver, allowing for a wide variety of towing options. It can accept a ball mount, cargo carrier, bike rack, tow hook and much more..
  • RUST, CHIP, UV-RESISTANT. This tow hitch is protected with a unique dual-coat finish of rust-resistant liquid Bonderite and highly durable black powder coat. The two finishes are co-cured together for exceptional resistance to rust, chipping and UV rays..
  • EASY TO INSTALL. No cutting! No splicing! The trailer wiring harness in this kit plugs into existing factory wiring on your vehicle and equips it with a standard 4-pin trailer wiring connector for plugging in and towing a trailer. It connects the taillights, turn signals and brake lights..
  • COMPLETE KIT. This towing kit includes a class 3 hitch with h....
Check Stock

Seachoice Trailer Coupler, Repair Kit, 2 in.

  • Quickly mounts to your trailer tongue. Choose from vertical channel mount (fits 3-1/2 inch wide OD / 3 inch ID vertical channel with 2 inch on center bolt pattern secure with 5/8" pins or bolts) or square plate 4 bolt mount (4-1/2 inch square bolt pattern).
  • Smoother safer towing. Improves your ride, reduces wear & tear on pickup & trailer. Great for heavy duty trailers from end dumps, race trailers, cargo trailers, tilt trailers, storage container & flat beds Instant air ride for your trailer..
  • 20,000 lbs rated trailer towing capacity with a cast 2 5/16 inch heavy duty demco cast coupler. 2,000 lbs tongue weight. Great for bumper pull race trailers, dump trailers and skid steer trailers..
  • Air ride technology: Built-in HD air bag for a smoother towing experience with built in height adjustment plus weight adjustable. Perfect when you don't know what pickup will be towing your trailer. Fine tune for your towing weight. Just add air for heavier loads. Absorbs the road bumps, thumps & bangs on whatever road you travel.
  • Made by Shocker Hitch USA. Optional weld-on vertical tongue adapter available &sold separately. Note: The main pivot bolt used in the Tongue Mount air coupler is a custom made 1 inch diameter 1045 medium carbon steel bolt. Heat treated to pre....
Check Stock

CURT Class 3 Trailer Hitch Tow Package with 2in Ball for 2007-2012 GMC Acadia

  • COMPLETE KIT. This towing kit includes a class 3 hitch with hardware and a wiring harness to provide a complete kit for outfitting your vehicle for towing. Both the hitch and wiring are designed for select models of the Buick Enclave, Chevrolet Traverse and GMC Acadia..
  • DEPENDABLE STRENGTH. This trailer hitch is rated for 5, 000 lbs. gross trailer weight, 500 lbs. tongue weight, 6, 000 lbs. weight distribution capacity and 600 lbs. weight distribution tongue weight (limited to lowest-rated towing component)..
  • VERSATILE DESIGN. This class 3 hitch equips your vehicle with a standard 2-inch x 2-inch hitch receiver, allowing for a wide variety of towing options. It can accept a ball mount, cargo carrier, bike rack, tow hook and much more..
  • RUST, CHIP, UV-RESISTANT. This tow hitch is protected with a unique dual-coat finish of rust-resistant liquid Bonderite and highly durable black powder coat. The two finishes are co-cured together for exceptional resistance to rust, chipping and UV rays..
  • EASY TO INSTALL. No cutting! No splicing! The trailer wiring harness in this kit plugs into existing factory wiring on your vehicle and equips it with a standard 4-pin trailer wiring connector for plugging in and towing a trailer. It connects the taillights, turn signals ....
Check Stock