Top Magnetic Trailer Lights For Towing Reviews

Master Tailgaters 19\ Wireless Trailer Tow Light Bar - Magnetic Mount - Ultra Bright LED with 4 pin Flat Hitch Transmitter

  • ...ress the switch of the light to switch to warning mode, during your work, you can warn the surrounding passing vehicles to ensure your safety..
  • EASY INSTALLATION -This wireless towing lights requires 8 x AA batteries (not included) and can be easily installed on the left and right rear of the truck metal. , Powerful magnetic base grips tightly while driving (tested up to 60 mph, but won't come off)..
  • EXCELLENT QUALITY- The magnetic base is made of stronger ABS plastic, which provides great insulation, impact and shock resistance, weather resistance, waterproof IP67 design, strong fog permeability, dustproof and anti-corrosion, working temperature -20℃~65℃, can also work normally in bad weather conditions, service life up to 50,000 hours..
  • WIDE APPLICATION - The magnetic tow lights The magnetic tow lights have a 4-pin to 7-pin wireless transmitter and is suitable for the widest range of vehicles, such as RV, campers, boat trailer, utility trailer, trailers, wrecker, agricultural equipment or jet skis, etc.(Not compatible with 2021 chevy Silverado. ).
Check Stock

Linkitom Magnetic LED Trailer Towing Light Kit, 24ft Cable with 7 pin plug, IP68 Waterproof, DOT Approved, for 5 Wire Vehicle

  • Some trucks, cars, and SUVs (like 2005 Nissan Frontier 4x4 nismo, 2001 Ford F550)are 4-wire systems, this trailer light is not fit for them, because Red brake lights and flashing orange Direction Indicator lights control by the separate circuit.
  • Just the 2 yellow light will lighting (not red brake light lighting)when brake if use it to 4-wire systems car..
  • Trailer towing Light come with 5 functions, 7 Pin Plug and strong magnetic, suitable for USA 5 wire shstems standard 12V trailer, Caravan , Low loaders , Jet ski Boats Break downs etc.
  • Out light come with 5 functions: Rear Position, Direction Indicator, Brake, Reflector, Number plate light(Right light no license plate light), but not has the back up lights, 24ft cable to light with a Standard 7 Pin Plug, fit for 5-7 wire flat Pin Adapter, then 8ft cable to go across to the the next light.
  • IP68 Waterproof and Submersible: All sealed, which means that water will not damage the diodes or circuit board, excellent tightness makes it be definitely waterproof and submersible.
  • Comes with 2 strong magnetic on the lights for quick and easy fitting an removal of the light.they handle bumpy roads without falling off. Easy to use, plug in and go..
Check Stock

CURT 56056 Vehicle-Side Custom 4-Pin Trailer Wiring Harness, Fits Select GMC Acadia

  • EASY TO INSTALL. No cutting! No splicing! This trailer wiring harness kit plugs into existing factory wiring on your vehicle and equips it with a standard, rear 4-pin trailer wiring connector for plugging in and towing a trailer.
  • STANDARD CONNECTOR. This plug-in 4-flat trailer wiring can be used to connect trailer tail lights, brake signal lights and turn signals. 4-way trailer light wiring is popular on a variety of trailers, adding versatile towing options for your vehicle.
  • VEHICLE-SPECIFIC. This aftermarket, vehicle-trailer wiring harness is designed for select years of the GMC Acadia.
  • EASY GRIP. Plugging in your trailer wiring and trailer lights is easy with the ergonomic design of this vehicle socket. It features tabs on the top and bottom for a better grip when plugging into your trailer or unplugging.
  • DUST COVER. To promote long-lasting use and weather resistance, this 4-pole trailer lighting wire harness comes with a rubber dust cover. It easily fits onto the 4-way flat connector when not in use, protecting it against the outdoor elements.
Check Stock

Nilight - TL-34 2PCS Steel Trailer Light Boxes Housing Kit w/6Inch Oval Red LED Trailer Tail Lights 2 Inch Round Red LED Side Marker Lights w/Grommet Plugs Wire connectors, 2 Years Warranty

  • Trailer towing Light come with 5 functions, 7 Pin Plug and strong magnetic, suitable for USA standard 12V trailer, Caravan , Low loaders , Jet ski Boats Break downs etc.
  • Out light come with 5 functions: Rear Position, Direction Indicator, Brake, Reflector, Number plate light(Right light no license plate light), but not has the back up lights.
  • Red brake lights and flashing orange Direction Indicator lights control by the separate circuit. Red - Brake, Green Right Turn Signal, white - Ground, Yellow - left turn signal and Black - License plate/Running.
  • 4x3.5inch good tail light kit can use on any trailer.
  • 24ft cable to light with a Standard 7 Pin Plug, fit for flat Pin Adapter, then 8ft cable to go across to the the next light. Some trucks, cars, and SUVs are 4-wire systems, this trailer light is not fit for them, please confirm that this trailer light is suitable for the plug socket on your vehicle before ordering..
  • IP68 Waterproof and Submersible: All sealed, which means that water will not damage the diodes or circuit board, excellent tightness makes it be definitely waterproof and submersible.
  • Comes with 2 strong magnetic on the lights for quick and easy fitting an removal of the light.they handle bumpy roads without falling off. Easy to use, plug in a....
Check Stock

CURT 56394 Vehicle-Side Custom 4-Pin Trailer Wiring Harness, Fits Select Chevrolet Traverse , Black

  • EASY TO INSTALL. No cutting! No splicing! This trailer wiring harness kit plugs into existing factory wiring on your vehicle and equips it with a standard, rear 4-pin trailer wiring connector for plugging in and towing a trailer.
  • STANDARD CONNECTOR. This plug-in 4-flat trailer wiring can be used to connect trailer tail lights, brake signal lights and turn signals. 4-way trailer light wiring is popular on a wide variety of trailers, adding versatile towing options for your vehicle.
  • VEHICLE-SPECIFIC. This aftermarket, vehicle-trailer wiring harness is designed for select years of the Chevrolet Traverse (factory tow package required).
  • EASY GRIP. Plugging in your trailer wiring and trailer lights is easy with the ergonomic design of this vehicle socket. It features tabs on the top and bottom for a better grip when plugging into your trailer or unplugging.
  • DUST COVER. To promote long-lasting use and weather resistance, this 4-pole trailer lighting wire harness comes with a rubber dust cover. It easily fits onto the 4-way flat connector when not in use, protecting it against the outdoor elements.
Check Stock

CURT 56076 Vehicle-Side Custom 4-Pin Trailer Wiring Harness, Fits Select Pontiac Grand Prix , Black

  • EASY TO INSTALL. No cutting! No splicing! This trailer wiring harness kit plugs into existing factory wiring on your vehicle and equips it with a standard, rear 4-pin trailer wiring connector for plugging in and towing a trailer.
  • STANDARD CONNECTOR. This plug-in 4-flat trailer wiring can be used to connect trailer tail lights, brake signal lights and turn signals. 4-way trailer light wiring is popular on a variety of trailers, adding versatile towing options for your vehicle.
  • VEHICLE-SPECIFIC. This aftermarket, vehicle-trailer wiring harness is designed for select years of the Pontiac Grand Prix.
  • EASY GRIP. Plugging in your trailer wiring and trailer lights is easy with the ergonomic design of this vehicle socket. It features tabs on the top and bottom for a better grip when plugging into your trailer or unplugging.
  • DUST COVER. To promote long-lasting use and weather resistance, this 4-pole trailer lighting wire harness comes with a rubber dust cover. It easily fits onto the 4-way flat connector when not in use, protecting it against the outdoor elements.
Check Stock

CURT 56327 Vehicle-Side Custom 4-Pin Trailer Wiring Harness, Fits Select Ford Transit-150, 250, 350, HD

  • EASY TO INSTALL. No cutting! No splicing! This trailer wiring harness kit plugs into existing factory wiring on your vehicle and equips it with a standard, rear 4-pin trailer wiring connector for plugging in and towing a trailer.
  • STANDARD CONNECTOR. This plug-in 4-flat trailer wiring can be used to connect trailer tail lights, brake signal lights and turn signals. 4-way trailer light wiring is popular on a variety of trailers, adding versatile towing options for your vehicle.
  • VEHICLE-SPECIFIC. This aftermarket, vehicle-trailer wiring harness is designed for select years of the Buick Enclave, Chevrolet Malibu and Chevrolet Traverse.
  • EASY GRIP. Plugging in your trailer wiring and trailer lights is easy with the ergonomic design of this vehicle socket. It features tabs on the top and bottom for a better grip when plugging into your trailer or unplugging.
  • DUST COVER. To promote long-lasting use and weather resistance, this 4-pole trailer lighting wire harness comes with a rubber dust cover. It easily fits onto the 4-way flat connector when not in use, protecting it against the outdoor elements.
Check Stock

Blazer International LT330 Red Trailer Towing Light Kit (Two-Sided Magnetic)

  • No splicing into vehicle's electrical system- towing kit bypasses vehicle's electrical system using the 4-flat adapter.
  • 8-Pound pull magnetic base assures lights stay in place - easily mount lights on trunk or roof of towed vehicle.
  • Light kit allows you to bypass a vehicle's wiring to provide temporary lights for the towed car and can also be used as trailer lights.
Check Stock

CURT 55540 Vehicle-Side Custom 4-Pin Trailer Wiring Harness, Fits Select Chevrolet Express, GMC Savana 1500, 2500, 3500, 4500

  • EASY TO INSTALL. No cutting! No splicing! This trailer wiring harness kit plugs into existing factory wiring on your vehicle and equips it with a standard, rear 4-pin trailer wiring connector for plugging in and towing a trailer.
  • STANDARD CONNECTOR. This plug-in 4-flat trailer wiring can be used to connect trailer tail lights, brake signal lights and turn signals. 4-way trailer light wiring is popular on a variety of trailers, adding versatile towing options for your vehicle.
  • VEHICLE-SPECIFIC. This aftermarket, vehicle-trailer wiring harness is designed for select years of the Chevrolet Express and GMC Savana 1500, 2500, 3500 and 4500.
  • EASY GRIP. Plugging in your trailer wiring and trailer lights is easy with the ergonomic design of this vehicle socket. It features tabs on the top and bottom for a better grip when plugging into your trailer or unplugging.
  • DUST COVER. To promote long-lasting use and weather resistance, this 4-pole trailer lighting wire harness comes with a rubber dust cover. It easily fits onto the 4-way flat connector when not in use, protecting it against the outdoor elements.
Check Stock

CURT 56245 Vehicle-Side Custom 4-Pin Trailer Wiring Harness, Fits Select Chevrolet Traverse, GMC Acadia, Buick Enclave

  • EASY TO INSTALL. No cutting! No splicing! This trailer wiring harness kit plugs into existing factory wiring on your vehicle and equips it with a standard, rear 4-pin trailer wiring connector for plugging in and towing a trailer.
  • STANDARD CONNECTOR. This plug-in 4-flat trailer wiring can be used to connect trailer tail lights, brake signal lights and turn signals. 4-way trailer light wiring is popular on a wide variety of trailers, adding versatile towing options for your vehicle.
  • VEHICLE-SPECIFIC. This aftermarket, vehicle-trailer wiring harness is designed for select years of the Chevrolet Traverse, GMC Acadia and Buick Enclave (factory tow package required).
  • EASY GRIP. Plugging in your trailer wiring and trailer lights is easy with the ergonomic design of this vehicle socket. It features tabs on the top and bottom for a better grip when plugging into your trailer or unplugging.
  • DUST COVER. To promote long-lasting use and weather resistance, this 4-pole trailer lighting wire harness comes with a rubber dust cover. It easily fits onto the 4-way flat connector when not in use, protecting it against the outdoor elements.
Check Stock

FEELOTAM Magnetic LED Trailer Towing Light Kit 24ft Cable with 7 Pin Plug Board Tail Brake Stop Indicator License Plate Light Lamp for Trucks Trailers RVs SUVs

  • ...d brake lights and flashing orange Direction Indicator lights control by the separate circuit.
  • Just the 2 yellow light will lighting (not red brake light lighting)when brake if use it to 4-wire systems car..
  • Trailer towing Light come with 5 functions, 7 Pin Plug and strong magnetic, suitable for USA 5 wire shstems standard 12V trailer, Caravan , Low loaders , Jet ski Boats Break downs etc.
  • Out light come with 5 functions: Rear Position, Direction Indicator, Brake, Reflector, Number plate light(Right light no license plate light), but not has the back up lights, 24ft cable to light with a Standard 7 Pin Plug, fit for 5-7 wire flat Pin Adapter, then 8ft cable to go across to the the next light.
  • IP68 Waterproof and Submersible: All sealed, which means that water will not damage the diodes or circuit board, excellent tightness makes it be definitely waterproof and submersible.
  • Comes with 2 strong magnetic on the lights for quick and easy fitting an removal of the light.they handle bumpy roads without falling off. Easy to use, plug in and go..
Check Stock

CURT 56020 Vehicle-Side Custom 4-Pin Trailer Wiring Harness, Fits Select Ford E-150, E-250, E-350 Super Duty

  • EASY TO INSTALL. No cutting! No splicing! This trailer wiring harness kit plugs into existing factory wiring on your vehicle and equips it with a standard, rear 4-pin trailer wiring connector for plugging in and towing a trailer.
  • STANDARD CONNECTOR. This plug-in 4-flat trailer wiring can be used to connect trailer tail lights, brake signal lights and turn signals. 4-way trailer light wiring is popular on a variety of trailers, adding versatile towing options for your vehicle.
  • VEHICLE-SPECIFIC. This aftermarket, vehicle-trailer wiring harness is designed for select years of the Ford E 150, E 250 and E 350 Super Duty.
  • EASY GRIP. Plugging in your trailer wiring and trailer lights is easy with the ergonomic design of this vehicle socket. It features tabs on the top and bottom for a better grip when plugging into your trailer or unplugging.
  • DUST COVER. To promote long-lasting use and weather resistance, this 4-pole trailer lighting wire harness comes with a rubber dust cover. It easily fits onto the 4-way flat connector when not in use, protecting it against the outdoor elements.
Check Stock

CZC AUTO 12V LED Magnetic Towing Light Kit for Boat Trailer RV Truck - Magnetic Strength 55 Pounds

  • 55 pounds magnetic strength base will be holded so strongly to automobile metal surfaces ,so lights never fell off during working.
  • Wire distance between lights is 7ft ，Wire harness length is 20ft enough with 4 standard pin connectors.
  • Super bright LED with 100,000 hours life and Complies with DOT standards.
  • Scratch resistant magnetic base for easy Mount！Each kit have assembly and opearating Instructions for easy installing.
  • Ideal for towing applications up to 80” wide like Trailer,Boat,Truck,RV,Dollys,etc.
Check Stock