Top Torque Gauge Reviews

DuroSTEEL Janus 10'x9' Commercial 1000 Series Metal Roll Up Door & Hardware Direct

  • ...ich are corrosion resistant. Wash coat over primer interior side. 40-year film integrity warranty — up to 25-year chalk and fade. Flexible nylon wear strips..
  • Bottom Bar: 24 gauge acrylic-coated galvalumed roll formed steel. 2” x 1 ½” galvanized angle. Bulb astragal (Durometer 75). Stainless steel bolts..
  • Axel/Torque Tube: 1” O.D. steel axle, 12-gauge. Oil tempered torsion springs conforming to ASTM A229. 18-gauge, 9 ½” diameter galvanized drum. Low friction, grease-filled steel ball bearings staked in each drum. 26 gauge spiral torque tubing that houses axle assembly..
  • Guide: 16 gauge galvanized. Vinyl guide wear strip. Bolt on head stop ¼” thick steel. 2 ¼” guide dept. Pre-punched for lock. Universal jamb mount. Hardware: Bottom bar mounted 12 gauge slide locks - 2 per door. Bottom bar mounted 16 gauge step plate - 2 per door. 12 gauge door mounting brackets. Ratchet tensioner device..
Check Stock

DuroSTEEL Janus 10'x12'Commercial 1000 Series Metal Roll Up Door & Hardware Direct

  • ...ich are corrosion resistant. Wash coat over primer interior side. 40-year film integrity warranty — up to 25-year chalk and fade. Flexible nylon wear strips..
  • Bottom Bar: 24 gauge acrylic-coated galvalumed roll formed steel. 2” x 1 ½” galvanized angle. Bulb astragal (Durometer 75). Stainless steel bolts..
  • Axel/Torque Tube: 1” O.D. steel axle, 12-gauge. Oil tempered torsion springs conforming to ASTM A229. 18-gauge, 9 ½” diameter galvanized drum. Low friction, grease-filled steel ball bearings staked in each drum. 26 gauge spiral torque tubing that houses axle assembly..
  • Guide: 16 gauge galvanized. Vinyl guide wear strip. Bolt on head stop ¼” thick steel. 2 ¼” guide dept. Pre-punched for lock. Universal jamb mount. Hardware: Bottom bar mounted 12 gauge slide locks - 2 per door. Bottom bar mounted 16 gauge step plate - 2 per door. 12 gauge door mounting brackets. Ratchet tensioner device..
Check Stock

DuroSTEEL Janus 8'x10' Insulated Commercial 1000i Series Metal Roll Up Door & Hardware Direct

  • ...ich are corrosion resistant. Wash coat over primer interior side. 40-year film integrity warranty — up to 25-year chalk and fade. Flexible nylon wear strips..
  • Bottom Bar: 24 gauge acrylic-coated galvalumed roll formed steel. 2” x 1 ½” galvanized angle. Bulb astragal (Durometer 75). Stainless steel bolts..
  • Axel/Torque Tube: 1” O.D. steel axle, 12-gauge. Oil tempered torsion springs conforming to ASTM A229. 18-gauge, 9 ½” diameter galvanized drum. Low friction, grease-filled steel ball bearings staked in each drum. 26 gauge spiral torque tubing that houses axle assembly..
  • Guide: 16 gauge galvanized. Vinyl guide wear strip. Bolt on head stop ¼” thick steel. 2 ¼” guide dept. Pre-punched for lock. Universal jamb mount. Hardware: Bottom bar mounted 12 gauge slide locks - 2 per door. Bottom bar mounted 16 gauge step plate - 2 per door. 12 gauge door mounting brackets. Ratchet tensioner device..
Check Stock

M12™ FUEL™ SURGE™ 1/4 in. Hex Hydraulic Driver 2 Battery Kit

  • TIM SANMERSENOD ▲M12 3/8 in. Drill/Driver (2407-20)▲ Delivers up to 275 in lbs of Torque and 0-400/0-1,500 RPM. New ergonomic handle design for increased comfort. Metal Ratcheting Chuck for maximum durability. The onboard LED light and fuel gauge help you increase productivity and avoid interruptions..
  • ▲M12 1/4 in. Hex Impact Driver (2462-20)▲ Milwaukee Impact Mechanism delivers 1,000 in-lbs of torque. 0-2,500 RPM for increased fastening speed. New ergonomic handle design for increased comfort. On-board battery fuel gauge displays remaining run time..
  • ▲M12 Hackzall Recip Saw (2420-20)▲ Only 11" and 2.2 lbs. for cutting in tight spaces. Variable Speed Trigger for increased user control. Accepts both HACKZALL and SAWZALL style blades. Keyless QUIK-LOK Blade Clamp allows for quick and easy blade changes. Battery Fuel Gauge displays remaining run-time. Built-In LED Light illuminates work surface..
  • ▲M12 3/8 in. Ratchet (2457-20)▲ Powerful 12-volt motor: Delivers up to 35 ft-lbs of torque. Superior fastening speed: Produces 250 RPM, with variable-speed trigger for greater control. Built-in LED light: Illumina....
Check Stock

DEWALT Drywall Screw Gun, 6.2-Amp (DW257)

  • Drywall screw gun has helical-cut steel and heat-treated gears for long life and durability.
  • DEWALT drywall screw gun has a high torque for deck building, drywall and heavy gauge steel stud framing.
  • The drywall gun has a depth-sensitive, "set and forget" nosepiece for consistent fastener depth.
  • Two-finger trigger for increased comfort and ease of use.
  • Helical-cut steel, heat-treated steel gears for long life and durability.
  • High torque for deck building and for drywall and heavy-gauge steel stud framing.
  • Depth-sensitive, set and forget nose piece for consistent fastener depth.
  • Two-finger rubber trigger for increased comfort.
Check Stock

Neiko 20743A 3/4”-Inch Digital Torque Adapter, 150-750 ft-lb, Digital Torque Wrench Converter/Torque Wrench Adapter, Alerts Torque Setting, Calibrate Digital and Analog Torque Wrenches

  • TORQUE WRENCH CONVERSION: This digital torque adapter converts any ratchet wrench into a precision torque wrench with a digital gauge and serves as an accurate calibration device for existing digital and analog torque wrenches..
  • METRIC/SAE & BI-DIRECTIONAL: This digital adapter can calculate torque at both metric and SAE units (Ft.-Lb., N-m and kg-m) and bolsters a 3/4-inch drive with socket drive and can measure in both directions, clockwise and counter-clockwise..
  • PEAK AND TRACE MODE: This torque adapter unit provides two types of modes: a peak mode that indicates when a specific level of torque is reached and a trace mode that actively shows how much torque is being applied on the display..
  • NOISE ALERT AT TORQUE SETTING: The audible confirmation is accompanied by a 3 LED light indicator system to give you a progressive audio notification when reaching specified torque ratings/settings and auto shuts off after 80 seconds of idle time..
  • ADAPTER SPECIFICATIONS: Torque range: 150-750 Ft-Lb or 200-1000 N-m.
Check Stock

Performance Tool W485 Pocket Precision Reference Cards Kit Set, 1 Pack

  • Card (1) Includes: AWG wire gauge, nail gauge, SAE and MET hole gauges, and pipe diameter gauge.
  • Card (2) Includes: SAE and MET rulers, angle gauge, radius gauge, circle compass, drafting shapes and curves.
  • Card (3) Front Includes: Angle formulas, geometric formulas, standard abbreviations, fraction to decimal equivalents, and wood measuring chart.
  • Card (3) Back Includes: Compass rose, electrical abbreviations, roman numerals, and conversion charts.
  • Conversion Charts Include: Speed, temperature, distance, time, power, weight, fluid, torque, area, and volume.
Check Stock

NEIKO 20742A 3/8” Digital Torque Adapter, 14.7-99.6 Ft-Lb, 3/8” Drive Digital Torque Wrench Converter/Torque Wrench Adapter, Alert Signals Torque Setting, Calibrate Digital & Analog Torque Wrench

  • TORQUE WRENCH CONVERSION: This digital torque adapter converts any ratchet wrench into a precision torque wrench with a digital gauge and serves as an accurate calibration device for existing digital and analog torque wrenches..
  • METRIC/SAE & BI-DIRECTIONAL: This digital adapter can calculate torque at both metric and SAE units (Ft.-Lb., N-m and kg-m) and bolsters a 3/8-inch drive with socket drive and can measure in both directions, clockwise and counter-clockwise..
  • PEAK AND TRACE MODE: This torque adapter unit provides two types of modes: a peak mode that indicates when a specific level of torque is reached and a trace mode that actively shows how much torque is being applied on the display..
  • NOISE ALERT AT TORQUE SETTING: The audible confirmation is accompanied by a 3 LED light indicator system to give you a progressive audio notification when reaching specified torque ratings/settings and auto shuts off after 80 seconds of idle time..
  • ADAPTER SPECIFICATIONS: Torque range: 14.7-99.6 Ft-Lb or 27-135 N-m.
Check Stock

Mark-10 MTT03-12 Digital Torque Gauge, 110 VAC

  • Usb data output ,peaked torque values saved and displayed ,programmable set points with pass/fail indicators.
Check Stock

VooDoo Industries VC405 Chrome Cafe Style Exhaust Pipe

  • Designed for maximum torque and power across torque curve.
  • Features a durable 16 gauge steel body with a lightweight aluminum rear end cap.
  • Includes U.S.F.S. approved, removable screen-type spark arrestor.
  • replacement spark arrestor sold separately.
Check Stock

Honda 72997-5003 Pipe End (1/2)

  • Designed for maximum torque and power across torque curve.
  • Made from durable 16 gauge steel body with a lightweight aluminum rear end cap.
  • Features a "quiet" 86-92dB sound level and a removable 1" Quiet Core insert.
  • Includes U.S.F.S. approved, removable screen-type spark arrestor.
  • replacement spark arrestor sold separately.
Check Stock

DG PERFORMANCE 051-2140 Sport Series Slip-On Exhaust

  • Designed for maximum torque and power across torque curve.
  • Features a durable 16 gauge steel body with a lightweight aluminum rear end cap.
  • Includes U.S.F.S. approved, removable screen-type spark arrestor.
  • replacement spark arrestor sold separately.
Check Stock

DG PERFORMANCE 051-2130 Sport Series Slip-On Exhaust

  • Designed for maximum torque and power across torque curve.
  • Features a durable 16 gauge steel body with a lightweight aluminum rear end cap.
  • Includes U.S.F.S. approved, removable screen-type spark arrestor.
  • replacement spark arrestor sold separately.
Check Stock