Top Titanium Machining Parts Reviews

Genmitsu 40pcs End Mills CNC Router Bits, 1/8\ Shank CNC Cutter Milling Carving Bit Set Including 2-Flute Flat Nose & Ball Nose End Mill, Nano Blue Coat & Titanium Coat CNC Bits, MC40A

  • High Quality: The Genmitsu end mills are made of ultra-fine 0.2μm tungsten carbide steel alloy that can keep continuous machining 800 minutes. Moreover, its Nano Blue Coating /Titanium Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality..
  • 2-Flute Spiral Flat Nose & Ball Nose End Mills -- Shank Diameter: 3.175mm, Cutting Diameter: 3.175mm, Cutting Length: 17mm, Overall Length: 38mm..
  • Two End Mill Sets -- Shank Diameter: 3.175mm, Cutting Diameter: 0.8 - 3.0mm (0.8/1.0/1.2/1.4/1.6/1.8/2.0/2.2/2.5/3.0mm), Cutting Length: 17mm, Overall Length: 38mm, with Nano blue and Titanium coating..
  • Applicable Materials: Widely used in various materials including plastics, aluminum, circuit board, wood, as well as other precision parts processing. To learn more about how to choose the right bits to meet your needs, please find the Comparison Chart (CNC Bits Buying Guide) at the Product Guides and Documents Section below..
  • Wide Compatibility: The MC40A end mills are compatible with most desktop CNC machines, such as the Genmitsu 3018 Series, as well as other industrial CNC machines. Just make sure you select the correct-sized co....
Check Stock

VMTW 8X1 CBN Grinding Wheel 180 Grit 1/4 inch side face for High Speed Steel

  • Straight diamond grinding wheel used for machining of conical, cylindrical and flat surface, cylindrical and conical apertures. Machining of cylindrical surfaces parts and surface ends at one set-up. Machining of recesses and slots of carbide stamps. Sharpening and finishing of carbide tools..
Check Stock

AUTOTOOLHOME 1/8\ 3/16\ 1/4\ 5/16\ 3/8\ 1/2\ high Speed Steel HSS 4 Flute Straight End Mill Cutter 5/32\ 1/16\ Set of 8

  • Cutting Diameter : 1/8" 3/16" 1/4" 5/16" 3/8" 1/2" 5/32" 1/16".
  • Suit for: Hardness of metal for above 30 degrees,with high bending resistance and abrasion resistance, exclusive to HIGH HARDNESS, HIGH SPEED CUTTING applications..
  • End mill bits are suitable for side milling, end milling, finish machining, etc. Apply to carbon steel, soft alloy steel, die steel, tool steel, cast iron, titanium, aluminum, etc..
  • The bottom of end mill bits is u-shaped groove design, large front angle effectively reduces cutting resistance, sharp and durable, convenient for chip removal, further improve machining efficiency..
Check Stock

YOYO TOOLS, Carbide Square Nose End Mill Set- Metric Carbide End Mill CNC Milling Cutter Tungsten 4 Fultes by YOYOTOOLS (D8+D10 End Mill)

  • 8mm and 10mm End Mill Set, Material : Tungsten Carbide.
  • End Mill Cutting Diameter : 8mm , 10mm, HRC55 degrees.
  • Suit for: with high bending resistance and abrasion resistance, exclusive to HIGH HARDNESS, HIGH SPEED CUTTING applications..
  • End mill bits are suitable for side milling, end milling, finish machining, etc. Apply to carbon steel, soft alloy steel, die steel, tool steel, cast iron, titanium, aluminum, etc..
  • The bottom of end mill bits is u-shaped groove design, large front angle effectively reduces cutting resistance, sharp and durable, convenient for chip removal, further improve machining efficiency..
Check Stock

AUTOTOOLHOME 1/4 inch HSS 4 Flutes End Mills Milling Cutter End Drill Bit Straight Shank Pack of 2

  • HIGH PROCESSING EFFICIENCY: the edge of end mill bits is HARD and SHARP with TIAIN coating, process the heat treatment materials under 32°with high speed, reduce changing times and improve the production efficiency..
  • APPLICATION: end mill bits are suitable for side milling, end milling, finish machining, etc. Apply to carbon steel, alloy steel, die steel, tool steel, cast iron, titanium, aluminum, etc..
  • CUTTING EDGE DESIGN: the bottom of end mill bits is u-shaped groove design, large front angle effectively reduces cutting resistance, sharp and durable, convenient for chip removal, further improve machining efficiency..
  • STRONG and DURABLE:The end mill bits are made from Ultra-fine tungsten steel bar, with high bending resistance and abrasion resistance, exclusive to HIGH HARDNESS, HIGH SPEED CUTTING applications..
Check Stock

Hss Center Drill, High Hardness Angle 60 ° Center Drill, for Industry Drill

  • Each center drill has a double end and with standard milling Angle 60 °.
  • Used for parts that need to be machined between production centers or work piece center holding.
  • Prefabricated precise positioning for hole processing, guide the drill for hole machining, so reducing error, center hole machining for the end surface of the shaft and other parts.
  • The center is used to make tapered holes for the center of the lathe in order to keep the standard twist drill in place so as to prevent the screw from slipping or deviating.
  • These center drill set are made of high speed steel, high hardness and durable in use.
Check Stock

OLITANS T024 Folding Knife for EDC Replaceable blades Pocket knife TC4 Titanium Alloy Handle for Outdoor Survival Hunting and Camping 4.4oz

  • Three types of blades are available: pointed blade, square blade, and serrated blade. These blades are made of 9Cr18mov steel with 59-61 HRC, bringing a razor sharpness that can easily cope with various outdoor needs..
  • Titanium Alloy Handle: Titanium handle length is 4.5 inches, titanium handle has many advantages, high strength, light weight, corrosion resistance. cnc precision machining brings a better grip feel, light, comfortable..
  • Dimensions: measuring 8 inches in overall length, 3.5 inches in blade size, and weighing only 4.4oz.
  • The bearing system makes it possible to open the knife with one hand, and the filpper design can open the knife with a light touch of the finger..
  • 100% SATISFACTION GUARANTEE: Quality and your satisfaction is our top priority. We provide lifetime warranty and no reason return policy to ensure your happy purchase experience..
Check Stock

OREI eARC 4K 60Hz Audio Extractor Converter 18G HDMI 2.0 ARC Support - HDCP 2.2 - Dolby Digital/DTS Passthrough CEC, HDR, Dolby Vision HDR10 Support (HDA-927)

  • Cutting Diameter : 1/8" 3/16" 1/4" 5/16" 3/8" 1/2" 5/32" 1/16".
  • Suit for: Hardness of metal for above 30 degrees,with high bending resistance and abrasion resistance, exclusive to HIGH HARDNESS, HIGH SPEED CUTTING applications..
  • End mill bits are suitable for side milling, end milling, finish machining, etc. Apply to carbon steel, soft alloy steel, die steel, tool steel, cast iron, titanium, aluminum, etc..
  • The bottom of end mill bits is u-shaped groove design, large front angle effectively reduces cutting resistance, sharp and durable, convenient for chip removal, further improve machining efficiency..
Check Stock

Precision Twist 4ASM High Speed Steel Short Length Drill Bit, Black Oxide Finish, Round Shank, Spiral Flute, 135 Degree Point Angle, 11.00mm (Pack of 6)

  • HIGH PROCESSING EFFICIENCY: the edge of end mill bits is HARD and SHARP, process the heat treatment materials under 32°with high speed, reduce changing times and improve the production efficiency..
  • CUTTING EDGE DESIGN: the bottom of end mill bits is u-shaped groove design, large front angle effectively reduces cutting resistance, sharp and durable, convenient for chip removal, further improve machining efficiency..
  • APPLICATION: end mill bits are suitable for side milling, end milling, finish machining, etc. Apply to carbon steel, alloy steel, die steel, tool steel, cast iron, titanium, aluminum, etc..
  • One Set of metric end mill bits Including: 8 Different kinds of Size end mills to meet your need, 2mm=1/16.
Check Stock

Carbide Rough Milling Insert Carbide Inserts for Steel, Stainless Iron and Cast Iron PVD (AlTiN) Coating Carbide Milling Insert/Carbide Inserts APMT1604PDER-H2 APKT1604 for BAP400R Milling Holder

  • Machining: Copper And Aluminum Medium Finish Machining.
  • Allows Faster Machining And Leaves Better Finished on Metal Parts, Reduce the Downtime Required to Change Edges and Easily to be Replaced..
Check Stock

10 pcs 4-Flute End Mill Bits, AFUNTA 0.08\ - 0.47\ HSS CNC Straight Shank Drill Bits Cutter Tool Set for Wood Aluminum Steel Titanium

  • APPLICATION: Suitable for side milling, end milling, finish machining in carbon steel, alloy steel, die steel, tool steel, cast iron, and titanium..
  • HIGH PROCESSING EFFICIENCY: the edge of end mill bits is HARD and SHARP with TIAIN coating, process the heat treatment materials with high speed, reduce changing times and improve the production efficiency..
  • U-SHAPED GROOVE DESIGN, large front angle effectively reduces cutting resistance, sharp and durable, convenient for chip removal, further improve machining efficiency..
  • MATERIAL: high speed steel, high hardness, good wear resistance and durability..
  • 10 DIFFERENT KINDS OF SIZE end mills to meet your need, 2mm/0.08in,3mm/0.12in, 4mm/0.16in, 5mm/0.2in, 6mm/0.24in,7mm/0.27in, 8mm/0.31in, 9mm/0.35in,10mm/0.39in, 12mm/0.47in.
Check Stock

10Pcs Lathe Mill Center Centering Drill Bit Set HSS 60 Degree Combined Countersink Bits

  • 【High Quality Material】 The product is made of high-quality high-speed steel materials, double-edged, standard milling angle of 60 degrees, durable..
  • 【Safe to Use】The product is manufactured in accordance with strict quality standards before leaving the factory, with good safety performance and can be used with confidence..
  • 【Precision Machining】Prefabricated precise positioning for hole processing, guide the drill for hole machining, so reducing error, center hole machining for the end surface of the shaft and other parts..
  • 【Lathe Mill Center】The center is used to make tapered holes for the center of the lathe in order to keep the standard twist drill in place so as to prevent the screw from slipping or deviating..
  • 【Quality Service】 We strive to provide you with high quality and convenient service. You are welcome to contact us if you have any problem about our product, we will give you a satisfactory reply..
Check Stock

ER-32 Hex Collet Block Chuck, Workholding Collets Tool Holder for CNC Lathe Engraving Machine, High Strength and Hardness, Sturdy and Durable

  • Through hole allows the machining of long parts..
  • Used for quick setup on CNC machine tools..
  • Made of tool steel material, through hardening treatment..
  • Professional manufacturing, high machining accuracy..
Check Stock