Top Titanium Coil Pipe Reviews

Pyle PDS772 2.84-Inch Titanium Horn Driver 8 Ohm 13/8-Inch x 18 TPI

300 Watts RMS / 600 Watts Peak Power Handling - 50 oz. Magnet Structure.
Midrange / Tweeter Compression Driver - 2.84'' (72.2mm) Flat Aluminum Voice Coil - Titanium Diaphram.
Sensitivity (1w/1m): 107dB SPL - Frequency Response: 500Hz ~ 18kHz.
Midrange/Tweeter Compression Horn Driver.
Titanium Diaphragm, 2 Flat Aluminum Voice Coil.

Sensitivity: 99 dB Mounting depth: 2.875 inches 1.5-inch KSV voice coil Steel basket Impedance: 8 ohms 20-ounce magnet Size: 8 inches.
Diamond chrome cutting finish Ferro fluid enhanced voice coil Input sensitivity: 99 dB Frequency response: 2k 25kHz Part number: ATR-3721 Quantity: 2.
Brand: AudioPipe MPN: 4 x APMB-8SB-C + 2 x ATR-3721 UPC: 193802178814.
250 watts of max power 125 watts of RMS power RMS power handling: 175 watts each 3.75 inch titanium bullet tweeters Frequency response: 350-5000 Hz.
Part number: APMB-8SB-C Quantity: 4 Audiopipe ATR-3721 3.75" 350W Titanium Car Audio Pro Tweeters Peak power handling: 350 watts each Impedance: 4....

What's in the Box: (1) HT120 Tweeter pre-Installed in an aluminum horn, Mounting Screws, Warranty Card, Owner's Manual.
Rockville HT120 360w Aluminum Horn Titanium Tweeter with 2" Voice Coil, Top of the line Rockville high frequency driver pre installed in an aluminum horn, Titanium diaphragm tweeter, Bolt-on style system, Type: Compression driver.
RMS Power: 120W, MAX Power: 360W, Sensitivity: 105dB @ 1w / 1m, 34 oz Magnet, 2” High Temperature Die Cast Kapton Voice Coil.
Ferro Fluid Enhanced Voice Coil Cooling, Impedance: 8 Ohms, Frequency Response: 800Hz - 20kHz, We recommend using a crossover that cuts frequencies below 1500 to 3000Hz at -12dB per octave, Our metal horns are heavier and a denser material which ensures they will not generate resonances and unwanted vibrations that can alter the response of the speaker. Also our metal horns will never break even if you go over bumps while driving.
Horn Dimensions: 6.2” x 6.2” x 5.1” (158 x 158 x 130 mm), Throat Diameter: 2", Overall Depth: 7.6” (193 mm), Cutout Diameter: 5.79”, Mounting Depth: 7.36”, Extremely loud and clear highs with an amazing frequency response that can even play some mids, Shallow Mounting Depth.

Main structural parts made of corrosion-resisting Stainless steel, Long Using Life-span..
Transparent protective cover, heat preservation, saving energy, burst-proof, splash-proof, antirust, antiseptic..
Vertical condenser with feed-in pipe, big condensing pipe, big evaporating pipe, evaporating rate is more superior than rank instruments..
Evaporator is used for concentration, crystallization, separating and recovery biochemistry, organic chemistry, medical and experiment & scientific research of institutes and universities..

THE SPRING THAT SINGS | Simply use the included stainless steel beater to achieve an array of metallic effects including a finger cymbal ding, a dark metallic coil hit, and a long scrape of the coil. Playing only takes one hand, so it's easy to mute or stretch the coil for even more sound manipulation..
PROUDLY MADE IN THE USA | The TREcoil is made from a 1/4" rod of solid Aluminum/Titanium alloy that is hand-bent and tested by ear in our workshop just north of Nashville, TN..
FORGED FOR SUPERIOR STRENGTH AND SOUND QUALITY | Each coil undergoes high temperature heat treating to harden the metal and to add depth to its sound. The mantle secures the coil in place with a super durable polyurethane coated braided steel cord to keep your triangles hanging year after year..
A SAFE AND CONVENIENT MOUNT | The coil is removable and interchangable with other hanging instruments, making this an invaluable addition to your percussion section. The included stainless steel beater slides easily into a hole drilled in the top of the mantle for storage between uses..
DIMENSIONS | The TREcoil is 5" in diameter and 19" inches in length and comes with one Light Triangle Beater (TREbtr-LTE) that is 8 1/4 x 3/8 x 1/4 inches in dimension..

DIY High Pitch Horn Sound Voice Coil, be of excellent workmanship..
This voice coil has a terminal post, which is convenient to connect..
The high pitch is exquisite, transparent, clear and bright, and the high frequency is evenly distributed..

1 Goldwood Sound GT-324 titanium dome tweeter, 60 watts RMS and 120 watts max, 3500 - 25, 000Hz frequency response, 94dB, 8ohm.
1" Voice Coil, 8oz Magnet, titanium dome Cone, overall Dimension is 3.625" Round.

1 Goldwood Sound GT-336 titanium dome tweeter, 60 watts RMS and 120 watts max, 3500 - 25, 000Hz frequency response, 94dB, 8ohm.
1" Voice Coil, 8oz Magnet, titanium dome Cone, overall Dimension is 4.625" X 3.5".

Pony 50 Clamp Fixture for 3/4 Inch Black Pipe is America's most popular, most widely-used clamp fixture design. It is ideal for metalworking, woodworking and frame assembly in applications that range from do-it-yourself to industrial production.
Mounts on any length 3/4" black pipe with both ends threaded (pipe not furnished). A Pony Clamp Fixture is one of the handiest tools in any shop. One set of Pony Clamp Fixtures can be used to make any number of different length bar clamps simply by using the fixtures on different lengths of pipe.
Heavy-duty black pipe is recommended. No tools are required for assembly. Simply screw the head assembly onto the pipe threads at one end.
Slide the tail-stop onto the pipe at the other end. Then apply the coil-spring stop to the pipe threads at the tail-stop end of the pipe to prevent the tail-stop from sliding off the pipe during adjustment away from the work being clamped.
Pony Clamp Fixtures are interchangeable from one pipe length to another, so one set can serve several needs.

Pony 52 Clamp Fixture for 1/2 Inch Black Pipe is America's most popular, most widely-used clamp fixture design. It is ideal for metalworking, woodworking and frame assembly in applications that range from do-it-yourself to industrial production.
Mounts on any length 1/2" black pipe with both ends threaded (pipe not furnished). A Pony Clamp Fixture is one of the handiest tools in any shop. One set of Pony Clamp Fixtures can be used to make any number of different length bar clamps simply by using the fixtures on different lengths of pipe.
Heavy-duty black pipe is recommended. No tools are required for assembly. Simply screw the head assembly onto the pipe threads at one end.
Slide the tail-stop onto the pipe at the other end. Then apply the coil-spring stop to the pipe threads at the tail-stop end of the pipe to prevent the tail-stop from sliding off the pipe during adjustment away from the work being clamped.
Pony Clamp Fixtures are interchangeable from one pipe length to another, so one set can serve several needs.