Top Thermocouple Probe Reviews

Fluke 52-2 Dual Input Digital Thermometer, 3 AA Battery, -418 to 2501 Degree F Range, 60 Hz Noise Rejection

  • Thermocouple thermometer for use in applications requiring a broad range of temperatures, including furnaces, kilns, freezers, and other industrial applications.
  • Measures temperatures in Celsius, Fahrenheit, or Kelvin via a Type K, Type J, Type T, or Type E thermocouple probe.
  • Includes a Type K bead thermocouple probe with a 40" cable that measures from -40 to +260 degrees C (-40 to +500 degrees F).
  • Provides the relative time of minimum, maximum, and average temperature measurements for monitoring.
  • Conforms to NIST standards for compliance with regulations.
Check Stock

Coolrunner Gas Patio Heater Repair Replacement Parts Outdoor Heaters Safety Kits Thermocouple (M8 x1) and FD4 Dump Switch for Propane Gas Patio Heater

  • Well Made & More Safe: The thermocouple is made of brass and red copper and the anti-tilt switch, made of ABS, which will automatically stop heating when the gas heater is tilted..
  • Wide Compatibility: The patio heater thermocouple replacement is suitable for most of propane heater, patio heater and other gas heaters with thermoelectric safety..
  • Dimension: The total length of thermocouple is 350mm, thermocouple probe is M6*0.75 and threaded end is M8*1, please measure your original parts before ordering. Weak current FD4 dump switch is for gas R≤10 mΩ..
  • Easy to install: It is easy to replace just follow the way you remove the defective part. Notice: Keep the thermocoupler probe about 5mm from the burner hole..
  • Great Value for Money: If the thermocouple or dump switch of your gas heater is broken, you just need to change the replacement that will save $200 for you..
Check Stock

Fluke 53-2 Single Input Digital Thermometer with USB Recording, 3 AA Battery, -418 to 3212 Degree F Range, 60 Hz Noise Rejection

  • Thermocouple thermometer for use in applications requiring a broad range of temperatures, including furnaces, kilns, freezers, and other industrial applications.
  • Measures temperatures in Celsius, Fahrenheit, or Kelvin via a Type K, Type J, Type T, Type E, Type N, Type R, or Type S thermocouple probe.
  • Includes a Type K bead thermocouple probe with a 40" cable that measures from -40 to +260 degrees C (-40 to +500 degrees F).
  • Stores up to 500 points of data for analysis and monitoring.
  • Conforms to NIST standards for compliance with regulations.
Check Stock

2 Pcs Digital 2 Channels K Type Thermometer with 8 Thermocouples (Wire and Stainless Steel) -50~1300°c (-58~2372°f) Dual Measurement Meter Sensor Handheld HVAC Thermometer High Temperature Pyrometer

  • High Accuracy: reading accuracy (±0.1°C ±0.4), fast response using K type thermocouple probe, this digital temperature gauge will bring you a lot of convenience.
  • You will get 2 pcs of K type thermometers, 4 pcs of wire thermocouples and stainless steel thermocouples.
  • Multiple Temperature Display: in addition to the max/ min/ average, data hold, and auto power off functions, this hand held temperature reader is specially designed with a "T1-T2" calculation function, making it easy for the user to find the difference between two samples.
  • ​Portable and Practical: powered by battery, this thermometer with probe is portable and practical, operate it with 6 simple buttons with clear instructions, suitable for beginners and skilled users.
  • Plus, the removable silicone rubber cover protects your device from accidental drops.
  • It is factory calibrated and factory reset, and any standard K type thermocouple connector can be applied to replace the included thermocouple when needed.
  • Wide Measurement Temperature Range: mainframe range of digital k type thermometer is about -50°C ~ 1300°C (-58°F ~ 2372°F).
Check Stock

Thermco ACC310DLSDIG Laboratory Long Stem Digital Thermometer, 12\ Stem Length, -50 to 300°C Range, +/-1.0°C Accuracy

  • High Temperature K-type Thermocouple Thermometer Set with Stainless Steel Probe.
  • K-type thermocouple wire with Standard Accuracy: +/- 2.2 °C or +/- .75%.
  • 5 ft (155 cm) long thermocouple cable with braided stainless steel cover, mini thermocouple plug made from chromel / alumel.
  • Temperature measurement range: -328 to 932 °F (-200 to 500 °C), short term 1472 °F (800 °C).
  • Grounded K-type Thermocouple junction for fast measurements, 1x 9V battery included.
Check Stock

CDN INTP662 Infrared Gun / Thermocouple Thermometer for Food. 1.5' Height, 2.15' width, 6.25' Length, White

  • Measurement range: infrared: -76 to +662°f/-60 to +350°c.
  • thermocouple: -76 to +662°f/-60 to +350°c, distance spot: 8:1, display size: 0.875 w x 1.125 h (in)/2.2 w x 2,85 h (cm).
  • Nsf certified, 1.5 mm thin tip, dual function with infrared for non-contact surface temperatures and thermocouple probe for internal temperatures.3.75 inch (9.53 cm) probe.
  • Data-hold, one-button operation, battery status indication, maximum, minimum and lock modes for continuous scanning.
  • 304 stainless steel probe, auto-off after 15 seconds, 8-beam laser target illumination, backlit haccp check lights, food-safe abs plastic with biocote.
Check Stock

Temperature Sensor Probe, K-Type Temperature Sensor Stainless Steel Probe Thermocouple Temperature Sensor Probe 1/2 NPT Detachable 3-Pin Connector with 2m / 6.6ft Cable, RTD Temperature Sensor

  • Anti-rust Allows Nice Appearance and Good Durability: This Temperature Sensor Probe is made of high quality stainless steel SUS304 material, which is featured with high temperature resistance, rust and corrosion resistance.
  • Offers Excellent Performance: This Temperature Sensor Waterproof Probe is made of stainless steel mesh braided cable sheath for better using effect.
  • High Accurate and Wide Range: Measuring range of -100 ~ 1250 °C (-150 ~ 2280 °F), high measuring precision.
  • Applies for Most Environment: This Thermocouple Temperature Sensor Probe has strong environmental adaptability, can be used stably in most environments.
  • Convenient Operation: This RTD Stainless Steel Thermocouple Temperature Probe adopts with detachable 3-pin connector for more convenient use.
Check Stock

3 Meters K Type Mini-Connector Thermocouple Temperature Probe Sensor Temperature Sensing Line K Type Thermocouple Wire Measure Range -50 to 400 Celsius, Compatible with TM902C/ TES1310 (5 Pieces)

  • You will get: the package comes with 5 pieces k type thermocouple temperature probe sensors in 3 meters long, the enough quantity and length to meet your daily need.
  • Measurement range: the measure range of the temperature sensing line is -58 to 752 °F (-50 to 400 °C).
  • And the probe sensor can effect in 5 second with the accuracy degree 0.025 or 0.075.
  • Wide Applications: for general purpose temperature applications, the k type mini-connector is fastly response that is suitable for rapid measurement of air and gas, not suitable for liquid measurement.
  • Allows forming and bending of the thermocouple, so you don't need to worry about the risk of cracking.
  • Universal compatiblity: the thermocouple wires can compatible with most k type temperature measuring instruments, they can compatible with TM902C and TES1310.
  • Good insulation : the k type probe sensor is made of the fiberglass, which has good insulation, strong heat resistance and strong tensile strength.
Check Stock

Thermocouple & Tilt Switch for Patio Heater, Thermocouple and Dump Switch Repair Kit for Propane Patio Heater Glass Tube Patio Heater Gas Heater, Thermocouple Replacement for Tower Heater, 2 Pack

  • Purpose - This patio heater repair kit is to solve problem of pilot light not staying lit and heater not ignited. Problem can usually be fixed by replacing thermocouple and dump switch correctly..
  • Wide Application - Suitable for thermoelectric gas heater, outdoor propane heater, glass tube patio heater, porch patio heater, standing patio heater, tower heater, Pyramid heater, Hampton Bay heater, etc..
  • Easy to Replace - Probe is connected to the ignition, thermocouple is connected to the valve, the other two ports are connected to the safety dumping switch. If you are handy, this repair kit can save you a new heater..
  • Dimension - The thermocouple wire has total length of 350mm with temperature resistance sleeve. It has an M8*1 fixed thread head with end thread nuts that are compatible with 8mm gas valves. 15A weak current safety dump switch for gas R≤10 mΩ. Probe is not threaded. Note: Check your lead lengths before purchasing..
  • Package included tilt switch X 2pcs, thermocouple X 2pcs..
Check Stock

GBC Document Camera, Discovery 3000 (DCV10004)

  • pyrometer Temperature range: -50°C to 1300°C ( -58°F to 2372°F) and Overload display alert when input exceeds measurement range pyrometer. Thermocouple Temperature range: -50°C to 1000°C ( -58°F to 1832°F).
  • Designed for use with K-type thermocouples and Selection between Celsius and Fahrenheit.
  • Decimal or round number display selectable (decimal range is -58.0F to999.9F and round number range is -58F to 2372F).
  • Includes 2 Thermocouples ( One 3" K type temperature probe (-58 – 752 °F) and one Kiln Heavy duty K type Thermocouple ( -58°F to 1832°F) and Digital Pyrometer, 9V battery and Manual.
  • Thermocouple Measurement range: 32 - 1832 °F (0 - 1000 °C) Thermocouple Type: K Type Cable length : 3 ft Sensing tip length: 6" (150mm) Stainless Steel Sensing tip diameter: 0.19" (5mm) Thread width : 5/16" (M8) Internal Insulation: Fiber Glass External shielding: Metal Shield (Stainless steel braided).
Check Stock

5pcs Pack High Accuracy K Type Mini-Connector Thermocouple Temperature Probe Sensor, 1 Meter Long Measure Range -200°C~260°C (-328°F~500°F)

  • 5 Pieces of K Thermocouple Probe Range from -200°C~260°C (-328°F~500°F).
  • Compatible with HUATO S220-T8 & S1516 Data Logger.
  • Mini Connector with 1 Meter Long Sealed Cable.
  • Allows Forming and Bending of the Thermocouple Probe.
  • High Accuracy, Ease of Use and Plug in & Play.
Check Stock

2M K-Type Temperature Sensor Mini-Connector Probe Sensor Temperature Sensors Measure Range -40 to 400 Degrees Celsius (-104 to 752 Degrees Fahrenheit) for Thermocouple Sensor and Meter (5)

  • Quality material: the 2 m k-type temperature sensor is made of reliable material, it is anti-corrosion, waterproof and oil-proof and can withstand 400 degrees Celsius.
  • The temperature probe can provide you with long-term service so you can use it with confidence.
  • Sensitive response: the thermal response time of this temperature control probe is 0.1 seconds, such a sensitive response will improve your work efficiency and bring you a nice using experience.
  • Liquid measurement: the difference between this thermocouple probe and other common thermocouples is that it is waterproof and can be applied in some projects that come into contact with water, the feature of this mini-connector probe sensor will make your work much smoother.
  • Space temperature: the appearance of the k-type probe is made of teflon material, and the quality is reliable, and it has the feature of non-combustibility, insulation, high and low temperature resistance.
  • Wide range of applications: this grounded thermocouple can be applied to measure the surface temperature of molds, casting molds, flat glassware, aluminum manufacturing, bearings and other solid surfaces, etc..
Check Stock

General Tools TS04 ToolSmart Bluetooth Connected Digital Multimeter Auto-Ranging with NCV Detector CAT III 600V Safety Rated

  • The ToolSmart Digital Multimeter reads voltage, current, resistance, temperature, and more with turn of the dial, features 10 functions and 26 ranges.
  • This voltmeter features an integrated non-contact voltage detector and a K-type bead thermocouple probe.
  • Pair with your phone as a second screen for visibility in dark environments and to simplify two person jobs.
  • Quickly save your multimeter readings to the ToolSmart app on your phone and organize your findings by project to increase your productivity.
  • Digital volt meter comes with a pair of double insulated test leads, bead thermocouple probe and plug adapter, 9V battery and user manual.
Check Stock