Top Thermocouple Sensor Reviews

3 Meters K Type Mini-Connector Thermocouple Temperature Probe Sensor Temperature Sensing Line K Type Thermocouple Wire Measure Range -50 to 400 Celsius, Compatible with TM902C/ TES1310 (5 Pieces)

  • You will get: the package comes with 5 pieces k type thermocouple temperature probe sensors in 3 meters long, the enough quantity and length to meet your daily need.
  • Measurement range: the measure range of the temperature sensing line is -58 to 752 °F (-50 to 400 °C).
  • And the probe sensor can effect in 5 second with the accuracy degree 0.025 or 0.075.
  • Wide Applications: for general purpose temperature applications, the k type mini-connector is fastly response that is suitable for rapid measurement of air and gas, not suitable for liquid measurement.
  • Allows forming and bending of the thermocouple, so you don't need to worry about the risk of cracking.
  • Universal compatiblity: the thermocouple wires can compatible with most k type temperature measuring instruments, they can compatible with TM902C and TES1310.
  • Good insulation : the k type probe sensor is made of the fiberglass, which has good insulation, strong heat resistance and strong tensile strength.
Check Stock

CNAODUN PID Temperature Controller Kit 100-240 VAC Voltage with 40DA Solid State Relay，K Type Thermocouple Probe and Heat Sink

  • ♥【One Way SSR output】3,4 port output to SSR,a 40da solid state relay is included in the package.The power supply voltage for this Pid temperature controller is 100-240VAC..
  • ♥【One Alarm Output】6,7 ports are alarm outputs, AC220V/DC30V 3A (Resistive load) ON/NC, also can be used to connect relay..
  • ♥【Supports 2 Wire Sensor Input】Support two-wire thermocouple input, K, E, J, N, W3-25, W5-26 type thermocouple input are available, the default setting is K type thermocouple input.
  • ♥【℉ and ℃ Adjustable】Fahrenheit and Celsius adjustable, default is Fahrenheit, with PID function.
  • ♥【Temperature Digital Display】PV is the current measured temperature, SV is the set temperature, both are displayed simultaneously..
Check Stock

ennoLogic Volt mA Thermocouple Loop Process Calibrator eC370T - 0-20V and 4-20mA Simulator – Portable Millivolt mA and Temperature Signal Generator and Meter for Transmitters Current Loops PLC

  • VERSATILE AND ACCURATE VOLT MA THERMOCOUPLE CALIBRATOR: Signal generator, simulator and volt / mA meter for calibrating, testing and repairing milliamp loops, thermocouples, PLC, temperature control and HVAC systems. Easily generate precise test signals for current and voltage devices (mA, mV, V, Celsius and Fahrenheit ranges)..
  • NUMERIC KEYPAD for ease and flexibility in setting output signals configuring options. HOTKEY programming for each numeric key (long-press immediately outputs user-configured voltage, current or temperature signal). RAMP AND LADDER OUTPUT FUNCTIONS can be custom configured. BUILT-IN 24V LOOP SUPPLY lets you power and read a device or transmitter without needing another multimeter. This greatly simplifies testing 2-wire current loops..
  • MEASURE VOLTAGE OUTPUT SIGNALS from process devices and sensors with two input ranges of 0-100mV (0.01mV resolution, 0.06% accuracy) and 0-20V (1mV resolution, 0.08% accuracy). MEASURE CURRENT TRANSMITTERS within a range of 0 to 24mA with 0.001mA resolution and 0.08% accuracy. MEASURE THERMOCOUPLE TEMPERATURES within a range of -250°C to +1800°C and resolution of ±0.7°C to ±2°C (range and resolution depends on thermocouple type, supported are type K, J, E, T, N, S, R, and B.).
Check Stock

MYPIN® Universal Digital TA6-SNR PID Temperature Controller with Relay DIN 1/8 SSR-25DA and K type thermocouple,Dual Display for F/C,7 Output Combinations,Accuracy 0.2%

  • √ ● Dual display for Fahrenheit(F) and Celsius(C)，Range: -1999 to 9999 (depends on the input signal).
  • √ ● Input: Thermo Resistor: PT100, Cu50，Thermocouple: K,Wre3 ~ Wre25 ， Main Output: SSR: Open circuit: 4V, Closed Circuit: 24V 40mA DC.
  • √ ● K type thermocouple Temperature rang:0-800℃, Sensor Dia: 4.5mm, Cable Length: 2m.
  • √ ● Solid state relay SSR-25DA Load Voltage: AC 24-380V, Load Current: 25A, Input Voltage: DC 3-32V.
  • √ ● Packing details: 1 x SNR Temperature Controller( DIN 1/8), 1 x SSR-25DA Solid State Relay, 1 x K Type Thermocouple( 6 Feet).
Check Stock

Fluke 568 Dual Infrared Thermometer, -40 to +1472 Degree F Range, Contact/Non Contact

  • Dual infrared and thermocouple thermometer for noncontact or contact temperature measurement in electrical maintenance and monitoring industrial and manufacturing processes.
  • Measures temperature with the infrared sensor from -40 to +800 degrees C (-40 to +1472 degrees F) with an accuracy of + or - 1 degree C (+ or - 2 degrees F).
  • Measures temperature with the included Type K bead thermocouple from -40 to +260 degrees C (-40 to +500 degrees F).
  • 50:1 infrared distance-to-spot ratio with laser sighting for pinpointing the measurement area.
  • Stores up to 99 points of data for analysis and monitoring on a computer.
Check Stock

FLUKE FLUKE-62 MAX+ INFRARED THERMOMETER, -30C to +650C / -22F to +1202F

  • Dual infrared and thermocouple thermometer for noncontact or contact temperature measurement in electrical maintenance and monitoring industrial and manufacturing processes.
  • Measures temperature with the infrared sensor from -40 to +800 degrees C (-40 to +1472 degrees F) with an accuracy of + or - 1 degree C (+ or - 2 degrees F).
  • Measures temperature with the included Type K bead thermocouple from -40 to +260 degrees C (-40 to +500 degrees F).
  • 50:1 infrared distance-to-spot ratio with laser sighting for pinpointing the measurement area.
  • Stores up to 99 points of data for analysis and monitoring on a computer.
Check Stock

Supco EM60 Dual-Channel Differential Digital Thermocouple Thermometer with Probes, -200 to 1300 Degrees C, -328 to 2372 Degrees F, Accuracy of + or - 0.1% of reading + 0.7 Degree C

  • Digital thermometer with probes for applications requiring a broad range of temperature measurements, including superheat measurements, food service applications, and heating, ventilation, and air-conditioning system maintenance.
  • Measures temperature from -200 to 1300 degrees C (-328 to 2372 degrees F), with a best accuracy of + or - 0.1% of reading + 0.7 degree C (1.4 degrees F).
  • Accepts K-type thermocouple probes, for a broader temperature measurement range than a thermistor sensor, or J-type thermocouple probes, for higher accuracy than K-type sensor.
  • Dual-channel thermometer with two inputs for measuring the temperature of two samples at the same time.
  • Displays current temperature for either input channel, the highest or lowest temperature reading for a session, or the difference between the two channels.
Check Stock

PerfectPrime TC41, 4-Channel K-Type Digital Thermometer Thermocouple Sensor -200~1372°C/2501°F

  • 4-Channel K-Type Digital Thermometer Thermocouple Sensor.
  • Measurement Temperature range: – 200°C ~ 1372°C (-328°F ~ 2501°F).
  • K Type Temperature resolution : 1000°C : 1°C/°F / K.
  • Item includes: 1 x Meter and 4 Probe sensor (length ~ 95cm each, -30°C to 300°C).
Check Stock

2M K-Type Temperature Sensor Mini-Connector Probe Sensor Temperature Sensors Measure Range -40 to 400 Degrees Celsius (-104 to 752 Degrees Fahrenheit) for Thermocouple Sensor and Meter (5)

  • Quality material: the 2 m k-type temperature sensor is made of reliable material, it is anti-corrosion, waterproof and oil-proof and can withstand 400 degrees Celsius.
  • The temperature probe can provide you with long-term service so you can use it with confidence.
  • Sensitive response: the thermal response time of this temperature control probe is 0.1 seconds, such a sensitive response will improve your work efficiency and bring you a nice using experience.
  • Liquid measurement: the difference between this thermocouple probe and other common thermocouples is that it is waterproof and can be applied in some projects that come into contact with water, the feature of this mini-connector probe sensor will make your work much smoother.
  • Space temperature: the appearance of the k-type probe is made of teflon material, and the quality is reliable, and it has the feature of non-combustibility, insulation, high and low temperature resistance.
  • Wide range of applications: this grounded thermocouple can be applied to measure the surface temperature of molds, casting molds, flat glassware, aluminum manufacturing, bearings and other solid surfaces, etc..
Check Stock

PerfectPrime TC41, 4-Channel K-Type Digital Thermometer Thermocouple Sensor -200~1372°C/2501°F, 20 x 4 Data Log Storage Function

  • 4-Channel K-Type Digital Thermometer Thermocouple Sensor.
  • Measurement Temperature range: – 200°C ~ 1372°C (-328°F ~ 2501°F).
  • K Type Temperature resolution : 1000°C : 1°C/°F / K.
  • 20 Storage x 4 Temperature memory function.
  • Item includes: 1 x Meter and 4 Probe sensor (length ~ 95cm each, -30°C to 300°C) , Battery:9V DC (not included).
Check Stock

Mr. Heater F273401 Pilot Assembly for Portable Buddy,Multi

  • Fits Mr Heater: MH9B(2001-2008), MH9BX (2009-current).
Check Stock

Cooper-Atkins 35240 Series 352 AquaTuff Wrap&Stow Waterproof Thermocouple Instruments with MicroNeedle Probe, -100 to +500 degrees F Temperature Range

  • Dual-scale digital type-K thermocouple temperature sensor for use in industrial or food service environments.
  • Measures temperatures from -100 to +500 degrees F (-73 to +260 degrees C) with an accuracy of + or - 0.9 degrees F.
  • Probe measures 3.5" and has a 1mm tip for reduced impact.
  • Reinforced cable wraps around sensor unit for storage.
  • Ingress Protection certified IPX7 for protection against immersion in water up to 1m.
Check Stock

Cooper-Atkins 35140 Series 351 AquaTuff Wrap&Stow Waterproof Thermocouple Instruments with MicroNeedle Probe, -100 to +500 degrees F Temperature Range

  • Dual-scale digital type-K thermocouple temperature sensor for use in industrial or food service environments.
  • Measures temperatures from -100 to +500 degrees F (-73 to +260 degrees C) with an accuracy of + or - 0.9 degrees F (0.5 degrees C).
  • Probe measures 3.5" and has a 1mm tip for reduced impact.
  • Reinforced cable wraps around sensor unit for storage.
  • Ingress Protection certified IPX7 for protection against immersion in water up to 1m.
Check Stock