Top Tension Control Lag Bolts Reviews

Heavy Duty Bolts, Concrete Anchors TV Wall Mount Screws Kit for Mounting A TV Into Wood Or Concrete

Re-mounting, but lost your old hardware? This kit includes everything you’ll need for wood or concrete installs..
Our lag bolts are custom-hardened to prevent snapping or breaking..
Note: Concrete anchors are not compatible with wood and drywall.
If you have any question? contact us please..

Check Stock

CONFAST 1/2\ (Inside/Screw 1/2\ - 13) Double Expansion Anchor (20 per Box)

Allows for lag screw bolts to be installed into concrete, brick and block.
Inserts into a hole by tapping with a hammer until flush.
Lag screw expands the lag shield against the walls of the hole.
Drill hole with masonry drill bit based on diameter on anchor.

Check Stock

OLSON SAW CB50000BL 14-Inch Delta Band Saw Accessory Cool Blocks

An innovative feather board design that provides consistent tension and maximum holding pressure created by unique split rail construction.
Pre-load tension design maintains consistent pressure across face of the feather board.
2 each of 5/8" And 3/4" Metal miter bars, that fit all standard miter slots and four 1/4" T-track bolts.
Mounting hardware included for nearly any dual or tandem application - 3/4-inch and 5/8-inch wide miter bars and T-slot bolts fit most table and band saws, Router tables, and fences.
Includes sturdy spacer for tandem Feather Board operations.
Dual slide motion - Side to side and forward action for quick and easy setup.
Unique pre-load tension Design - quickly set tension for consistent cuts while reducing the chance of kick-back.
Split rail miter bar construction - provides maximum hold.
Mounting Hardware Included for nearly any dual or tandem application - 3/4-Inch and 5/8-Inch wide miter bars and t-slot bolts fit most table and band saws, router tables, and fences.
Includes sturdy spacer for tandem FeatherBoard operations.
Dual Slide Motion - Side to side and forward action for quick and easy setup.
Unique Pre-Load Tension Design - Quickly set tension for consistent cuts while reducing the chance of kick-back.

Check Stock

1/2 x 6” 25-Piece Black Lag Bolts Rustproof 4-Layer Ceramic BLAKOTE 2X Protection of Galvanized Lag Screws for Decks Pergolas by Makers Bolt

Secure Exterior Structural Wood - Ideal for deck wood, exterior plywood, and other marine grade plywoods, our heavy-duty lag screws make wood-to-wood fastening a breeze. Each pack comes with 25pcs of ½” diameter hex screws..
2x Corrosion Protection - These lag bolts for wood are made of an exterior grade 4-layer black ceramic coating called Blakote. With twice the protection of standard galvanized wood screws, they won’t tarnish after exposure to highly corrosive environments..
Better for Outdoor Applications - Our structural screws have a black matte finish. They’re tougher for outdoor wood projects than our black oxide finish..
Comes in Different Lengths - Use these construction wood screws on decks, gazebos, trusses, and other wood connections. Our lag bolts are available in 1/2" diameter and in lengths up to 8”..
Uniform Heads and Precise Threading - Makers Bolt screw sets are specially manufactured under tight tolerance, ensuring precision and uniformity in production..

Check Stock

REDCAMP Indoor Hammock Hanging Kit Heavy Duty 304 Stainless Steel Hammock Wall Mount Kit 800 lb Capacity

EXPANSION SCREWS: This hammock hanging kit contains 2 expansion bolts and 2 lag screws. Expansion bolts are the best choice for concrete wall, lag....
HEAVY DUTY HAMMOCK HANGING HOOKS: the screws and washers are exceedingly heavy and thick, made out of 304 stainless steel and galvanized, support up....
PERFECT FOR BOTH INDOOR AND OUTDOOR USE: this set of high quality hammock hooks and carabiners can be adjusted to the ceiling of your garage or room,....
EASY AND FAST SET UP: This hammock holder is really easy to install, a spanner and a drill will be completely enough..
REDCAMP GUARANTEE: Your 100% satisfaction has always been our top priority. That is why all of our products are backed by our unconditional 365-day....

Check Stock

Venzo Bike Bicycle Bench Mount Clamp Repair Rack Stand Work Stand - Bike Maintenance

BENCH MOUNT: Bike repair stand mounted on a bench is more stable than portable and foldable repair stand. It can handle harsh bike mechanic or....
FULL METAL: The workstand is made of heavy duty steel except rubber protection coating. No more broken parts! With it's 360 degree turning and side....
MOUNTING HOLES: Mounting flange has four predrilled holes, allowing use of bolts or lag bolts to mount ( Mounting bolts not included )..
DURABLE: We understand what kind of workstand riders need. The quick release & bolts are both heat treated and approved not to be stripped anytime.....
ORDER NOW, WORRY FREE! We're so confident about our product quality that we can provide a life time warranty ! Made in Taiwan..

Check Stock

LaBear 3/8\ Drive to 1/4\ Hex Drive Quick Change Impact Adapter (3/8\DR to 1/4\H)

Fits: 1/2” Lag bolts (Hard Heads), 5/8”, 3/4”, & 1/2” square headed bolts and nuts.
Handle Type: Non-conductive and Lightweight.

Check Stock

Jet Lag Rapid-Reset: Travel Relief Remedy Supplement / Anti Jet Lag Pills / Jet Lag Relief / Natural Jet Lag Supplements with 7 Active Ingredients / Easy to Swallow / 30 Capsules

...una Pruriens Extract support mood and cognitive function..
PERFECT FOR TRAVELING OVERSEAS OR ACROSS TIME ZONES - Helps reset your internal clock, also known as circadian rhythm, from unusual travel/flight schedules. Additionally, Jet Lag Rapid-Reset helps to minimize stress and tension so you can feel better for your vacation or business trip. Provides 30 doses per bottle which is more than enough to share with family and friends for several trips..
ALL-IN-1 Jet Lag Relief Supplement - Manufactured in the USA in certified GMP labs & distributed by Elevate Recovery Supplements, LLC (a Texas based healthcare company established in 2012).

Check Stock

#17 x 6 Construction Lag Screw Exterior Coated Torx/Star Drive Heavy Duty Structural Lag Screw Far Superior to Common Lag Screws - Modified Truss Washer Head - 100 Screw Count

Screw Dimensions - ~5/16" Thread Diameter - 11/16" Head Diameter - Length 6".
Manufactured from High Quality Heat Treated Steel, Triple Coated, ACQ Treated Lumber Compatible.
Corrosion Resistant Lag Screws Passed the 1200 Hour Salt Spray Test Without Coating Failures.
Type 17 Notched Extra Sharp Point for Quick Starts without "Walking", Reduces Need for Pre-Drilling.
Construction Lag Screws Far Exceed Standard Lag Bolts in Sear Compression Forces.

Check Stock

Kanto PMX700 Pro Series Full Motion Articulating TV Wall Mount for 42-inch to 100-inch TVs | Adjustable Positioning | Integrated Cable Management | Toolless Tilt

HORIZONTAL OFFSET – All PMX mounts feature a segmented design that allows the arm assembly to be easily removed and positioned, independent of the wall plate. This setup makes it easier to center your television, regardless of the location of the studs..
EASY INSTALLATION – Installing a PMX TV mount is quick and easy. Weighing less than 10 pounds, the wall plate can be installed unassisted. The arm assembly can then be hooked into place before securing it with the provided hardware..
TOOLLESS TILT – The PMX series features a specially designed tilt mechanism that allows for precise adjustments to be made without the need of tools. Set the tension to allow for finger-tip adjustments, or lock it in place at the desired angle..
SUPERIOR EXTENSION – This wall mount is made from solid steel and has heavy-duty wishbone arms that allow maximum extension and support, even for larger televisions..
CONVENIENT BOLT PACK – The PMX700, along with the other TV mounts in the PMX Series, is carefully packaged with all the lag bolts, anchors, washers, and spacers needed for both wood studs and concrete walls..

Check Stock

Milescraft 1406 FeatherBoard for Router Tables, Table Saws and Fences

This innovative feather board design provides consistent tension and maximum holding pressure created by unique split rail construction.
Pre-load tension design maintains consistent pressure across face of the feather board.
5/8" And 3/4" Metal miter bars fit all standard miter slots.
Dual Slide Motion-side to side and forward action for quick and easy setup.
All mounting hardware included for nearly any operation 3/4 and 5/8-inch wide miter bars and T-slot bolts for applications on most standard table saws, Router tables, and fences.
Split rail miter bar construction-provides maximum hold.
Ergonomic knobs help prevent over-tightening and provides non-slip loosening.
All mounting hardware included for nearly any operation 3/4 and 5/8-Inch wide miter bars and t-slot bolts for applications on most standard table saws, router tables, and fences.
Unique Pre-Load Tension Design-quickly set tension for consistent cuts while reducing the chance of kick-back.

Check Stock

SHIMANO Dura-Ace 9100 Pedal; Black

Wide bearing placement - bearing placement at both ends of the platform offers symmetrical load dispersion.
Low-profile design - maximum performance is achieved with close-to-the axle pedal/cleat interface.
Hollow cleat bolts - no detail is overlooked hollow cleat bolts offer lighter weight.
Customizable ride settings - adjustable tension settings allow the cleat tension to be tuned to the individual rider’s preference.
Ultimate design - the pd-9100 is the perfect balance of strength-to-weight rigidity and efficiency. it’s the ultimate expression of the spd-sl platform.

Check Stock

48 Pack Swage Lag Screws Left & Right for 1/8\ Cable Railing kit,T316 Stainless Steel Stair Deck Railing Wood Post of Cable Railing Kit, Decking Railing Hardware, DIY Baluster Kit

【LEFT & RIGHT DESIGN】 With the Left hand lag screws and Right hand Lag Screws design, it can rotate wire rope in the same direction, which resolves the problem of twisting the wire rope. Products without Left & right design might damage the cable. The wrench multi-tool is handy, it will help you drill the lag screw into the wood easily..
【PROTECTOR SLEEVES】 These stainless steel protector sleeves will prevent the wire cable from wearing into the post, and maintain the cable rail tension for preventing wire rope vibration..
【COMPATIBILITY】 These Cable Railing Kits are suitable for 1/8" diameter wire rope cable railing system, perfect for DIY your own wood baluster post stair or decking railing project, good for indoor or outdoor applications..
【HIGH-QUALITY 】 Made of premium stainless steel for weather-tough durability, super-strong resistance to rust and corrosion, low maintenance and lasting beauty..
【WHAT YOU WILL GET】 The cable railing kit includes 30 PCS left handed thread swage lag screws, 30 PCS right handed thread swage lag screws, 80 PCS protector sleeves, 2 PCS drill bits (The 6.5mm drill bit is used for drilling the protector sleeves holes, and the 5mm drill bit is used for drilling the lag screws holes), 1 PCS wrench..

Check Stock