Top Temperature Switches Reviews

MYPOUOS 2 IN 1 750W LED Digital Soldering Station Hot Air Gun Rework Station Electric Soldering Iron For Phone PCB IC SMD BGA Welding SET 110V 8588D SET1

★★★★【Product advantages】This machine is equipped with a heat gun and a soldering iron. With handle induction system, automatic cooling, automatic constant temperature. Dual control switches, the most scientific and fashionable two-in-one design, with high-quality ABS plastic shell, the machine is compact and durable..
★★★★【ADJUSTABLE TEMPERATURE】has big screen dual blue LED display sets, accurate setting and control temperature at +1°C, temperature adjustment range from 100°C to 480°C (212°F - 896°F), temperature tolerance is within +2°C..
★★★★【Anti-static Design】Anti-static design of the whole machine, effectively eliminate the damage of SMD components. it has also the function of fault self-detection and fault warning..
★★★★【Precautions 1】This product is 110V 60Hz，Before using, Please make sure your address is using 110-120V voltage ,please make sure that the power cord is tightly connected to the machine. Before turning on the power, make sure that the handles of the welding pen and the hot air gun are placed on the tray, and then turn on the two switches on the front of the welding station..
★★★★【CAUTIONS & WARNINGS】For your own safety, please read the manual carefully before usi....

Check Stock

UCTRONICS PoE hat for Raspberry pi

For Pi 4 and 3 B+: This PoE HAT can be used to deliver clean and reliable power to the raspberry pi 3 model B+ and raspberry pi 4 model B (not included)..
Intelligent Temperature Control: the 25mm×25mm brushless cooling fan will turn automatically when the temperature of the processor is high..
Smaller Size: Save more space than the official HAT, can be held in the most case for Raspberry Pi.We recently released a new version of PoE HAT with fan, which can support 48V non-standard switches, please search B09MCGFX12.
NOTE: The network switch or power sourcing equipment (PSE) is needed to supply the PoE signal, and they must be compliant with the IEEE 802.3af or 802.3at PoE standard, particularly section 33.4.1 with regards to PSE electrical isolation of the leads. For the non-isolated switch, such as some Ubiquiti switches can not provide proper isolation, they can only work with CAT 5E and CAT 6E network cable..

Check Stock

CyberPower ENVIROSENSOR Environmental Sensor 12V RJ45 Ethernet Port 10FT Cable

RMCARD/ENVIROMENTAL SENSOR COMPATIBILITY: Combine the ENVIROSENSOR with the RMCARD205/RMCARD305 (sold separately) for real-time temperature and....
INPUT CONTACT CLOSURES: Allows users to monitor up to 4 connected devices such as door alarms, security switches and security systems.
SECURITY MONITORING: Input contact closures provide options for monitoring door alarms, security switches, and other security devices.
CONNECTION PORT and CABLE: RJ45 Ethernet port with 10FT cable.

Check Stock

C-Warmer Type 1:Dental Composite Compule Cartridge Warmer

Improves the flow capacities, reduces microleakage, and reduces curing time by pre-heating the composites.
1 Large Slot / 8 Small Slots : Large slot for composite or dispenser gun / Small slot for anesthetic cartridges or composite compules.
Recommended temperature : lidocaine at 37°C (body temperature) / composite at 40°C~45°C.
Takes about 10~15 min. to reach 40°C. (Based on the lid closed & AC system off).
LED display shows current temperature and adjust the temperature by 1°C with '▲'/'▼' button. When Power button is pressed shortly, temperature switches from Low-Medium-High (30°C-40°C-50°C).

Check Stock

750W Soldering Iron Station , 2 IN 1 Digital Hot Air Rework Station with 212°F- 896°F Temperature Control, LED display, Desoldering Pump , 4 Tweezers

...for home maintenance such as mobile phones, computers, circuit boards, etc..
【Fast Heating & Anti-static 】 Hot ceramic soldering iron heating core, significantly increases the life of the soldering station. Anti-static design of the whole machine, effectively eliminate the damage of SMD components..
【Adjustable Temperature】The 8582D 2 in 1 soldering station has a dual blue LED display group with infinite knob , which is accurate Set and control the temperature at ±1°c, the temperature adjustment range is from 100°c to 480°C (212°F-896°F), the temperature tolerance is within ±2°c..
【Sleep and magnetic induction function】 When the hot air gun placed on the bracket , the machine will automatically cut off the hot air heating, keep the hot air temperature below 100 ℃, and the hot air gun will enter the dormant state.After picking it up, the heat gun will automatically heat up to the previous temperature.
【Product Package】1xSoldering Station Body.
10 x Assorted Sizes of Soldering Tips.

Check Stock

C-Warmer Type 2 Dental Composite Compule Anesthetic Cartridge Warmer

Improves the flow capacities, reduces microleakage, and reduces curing time by pre-heating the composites.
3 Large Slot / 4 Small Slots : Large slot for composite or dispenser gun / Small slot for anesthetic cartridges or composite compules.
Recommended temperature : lidocaine at 37°C (body temperature) / composite at 40°C~45°C.
Takes about 10~15 min. to reach 40°C. (Based on the lid closed & AC system off).
LED display shows current temperature and adjust the temperature by 1°C with '▲'/'▼' button. When Power button is pressed shortly, temperature switches from Low-Medium-High (30°C-40°C-50°C).

Check Stock

TSL1401CL Linear Sensor 128X1 Linear CCD Camera Sensor Ultra Wide Angle Lens 120 Degree Black and White Line Tracking Module

BASIC SPECIFICATIONS: With sensitivity pure tones , field cut and signal output, circuit board output switch (can be directly passed through the microcontroller).
MULTIPLE OUTPUTS: The linear magnetic sensor switches has signal output indication, single signal output, active low signal output.
IDEAL CHOICE: This linear magnetic sensor switches is ideal for temperature control, proximity switches, alarm detection or rotate encoders.
WITH SENSITIVITY: Universal sensor module with potentiometer to adjust the sensitivity of the sensor, provides analog and digital output.
HIGH COMPATIBILITY: With A3141 chipset, 49E linear effect sensor, LM393 dual differential comparator, potentiometer, 2 LED and 6 resistors, fully compatible with standard microcontrollers.

Check Stock

AMAZING FORCE Bathroom Sink Faucet 2 Handles Bathroom Faucet with Pop Up Drain Strainer and 2 Free Hoses Stainless Steel Sink Faucet Brushed Nickel

Durability and Practicality: The bathroom faucet adopts a brushed nickel surface, a stylish Two-handle design, and the sink faucet switches are on the....
High-Quality Material: The bathroom sink faucet is made of stainless steel. It is absolutely durable, anti-corrosion and anti-rust, ensuring your....
Simple Installation: The attached detailed installation instructions and 2 free stainless steel hoses will help you to eliminate installation....
Adjustable Water Temperature Handle: The sink faucet can provide cold water and hot water. The water flow and temperature can be easily controlled by....

Check Stock

ESUPPORT Blue 12mm Rubber Rocker Toggle Switch Knob Hat Waterproof Boot Cover Cap Dustproof Oil Resistant Pack of 5

There have metal screw cap inner, connect with the toggle switches more compact..
Environment Temperature: - 25 degrees ~ 80 degrees.
Waterproof Grade: IP67, Good waterproof performance, keep the switches dry and dust free..

Check Stock

X-Tronic 8000 Series - Dual Soldering Iron Station • ESD Safe • 5 Solder Tips • 6 Temperature Presets • Auto Shut Down Function • Calibration Function • °C/°F Conversion • Sleep Timer

...for home maintenance such as mobile phones, computers, circuit boards, etc..
【Fast Heating & Anti-static 】 Hot ceramic soldering iron heating core, significantly increases the life of the soldering station. Anti-static design of the whole machine, effectively eliminate the damage of SMD components..
【Adjustable Temperature】The 8582D 2 in 1 soldering station has a dual blue LED display group with infinite knob , which is accurate Set and control the temperature at ±1°c, the temperature adjustment range is from 100°c to 480°C (212°F-896°F), the temperature tolerance is within ±2°c..
【Sleep and magnetic induction function】 When the hot air gun placed on the bracket , the machine will automatically cut off the hot air heating, keep the hot air temperature below 100 ℃, and the hot air gun will enter the dormant state.After picking it up, the heat gun will automatically heat up to the previous temperature.
【Product Package】1xSoldering Station Body.
10 x Assorted Sizes of Soldering Tips.

Check Stock

Aopin Thermal Control Switch KSD301 Normally Open NO 190 Degrees 250V 16A Thermostat Temperature Switch 8pcs

2) State: The original state of the temperature control switch contact is normally open. When the temperature exceeds the rated temperature of 190 degrees Celsius, the thermostat will be Conduction..
3) Features: Bimetal chip contact sensor, sensitive response, fast response speed, safety, accurate action temperature, durable, no arc phenomenon..
4) The package includes: 8pcs x 190 degrees Celsius normally open thermal switches..

Check Stock

TOAUTO DS90 Soldering Station-°F & °C Dual Digital Display Soldering Iron Station Kit,90W Soldering Iron,302℉- 842℉ Temperature, Anti-Static Design & Grounding Wire, Auto Standby & Sleep,5 Solder Tips

...for home maintenance such as mobile phones, computers, circuit boards, etc..
【Fast Heating & Anti-static 】 Hot ceramic soldering iron heating core, significantly increases the life of the soldering station. Anti-static design of the whole machine, effectively eliminate the damage of SMD components..
【Adjustable Temperature】The 8582D 2 in 1 soldering station has a dual blue LED display group with infinite knob , which is accurate Set and control the temperature at ±1°c, the temperature adjustment range is from 100°c to 480°C (212°F-896°F), the temperature tolerance is within ±2°c..
【Sleep and magnetic induction function】 When the hot air gun placed on the bracket , the machine will automatically cut off the hot air heating, keep the hot air temperature below 100 ℃, and the hot air gun will enter the dormant state.After picking it up, the heat gun will automatically heat up to the previous temperature.
【Product Package】1xSoldering Station Body.
10 x Assorted Sizes of Soldering Tips.

Check Stock

Original Engine Management 9305 Coolant Temperature Sensor

Temperature Switches are calibrated from -40C to 125C to match O.E. resistance characteristics ensuring proper fuel mixture and ignition timing under all climatic conditions..
Manufactured to meet expectations for fit, form, and function.
Brass terminals for excellent conductivity.

Check Stock