Top Tapping Machine Kit Imperial Reviews

Display Stand for Lego Imperial Light Cruiser 75315 Creative Stand Building Kit Great Gift and Movie Collectibles 77 Pieces

【Product Introduction】Display Stand for LEGO Imperial Light Cruiser 75315 Building Kit, allowing you to store and display the Imperial Light....
【Enjoy Assembly】Build everything! Build your Imperial Light Cruiser and the display stand for it. This stand building kit is assembled from 77....
【Product Size】The stand measures about 3.7 in. (9.5 cm) high, 5.2 in. (13 cm) wide and 4.3 in. (11 cm) deep. It is full of awesome details and....
【Full Instruction】The set includes an easy-to-follow, step-by-step instructional guide showing how to build these models. It contains a full-color....
【100% Safe Materials & Service】Made of child-friendly high-quality ABS plastic, easy to assemble and disassemble. If you have any question, please....

Check Stock

Anti Theft License Plate Screws- Black Security Bolts Fasteners for Front Rear Tag Frame Holder 1/4 M6 Stainless Steel Car Truck Motorcycle Plate Mounting Hardware Kit- Screws Caps Insert Nuts

RUSTPROOF BLACK CAR TAG SCREWS- 304 stainless steel is one of the materials with highest rust and corrosion resistance. The black screw surface adopts....
LICENSE PLATE SECURITY SCREWS- These self-tapping screws and machine license plate bolts use a unique tamper proof design- hexagonal button pan head,....
1/4" (M6) LONG SCREWS- In this license plate mounting hardware kit, includes sheet metal self-tapping screws, metric mechanical bolts, screw caps,....
LICENSE PLATE SCRATCH RESISTANCE: The license plate rattle proof pad can be pasted on the back of the metal plate, reduce the vibration noise of the....
GUARANTEE- We provide many types of license plate screws: self-tapping screws (pointed head) and mechanical bolts (flat head). Please make the correct....

Check Stock

uxcell Spiral Flute Taps M12 x 1.75 + 0.03 Metric Titanium Coated Cobalt High Speed Steel Machine Thread Milling Screw Threading Tap

Spiral Flute Taps: Thread Size: M12 x 1.75 + 0.03.
Square End Size: 7mm / 0.28". Spiral flute design, upward chip removal, fast tapping with accuracy. Titanium coating provides excellent corrosion resistance, improves wear resistance and hardness, and reduces the coefficient of friction..
Wide Applications: Suitable for processing blind holes and sticky materials. For tapping aluminum, die steel, stainless steel, bronze, plastics. Recommended feed rate: general steel: 6-15m/min.
cast iron: 8-10m/min. The torque caused by too fast feed speed is too large, which can easily cause the tap to break..
Special Design: Enlarge the tap to suit the workpiece that needs electroplating or sandblasting after tapping. According to the thickness of the coating, an amplification of 0.03-0.1mm is generally used. It has high hardness and toughness, wear resistance, heat resistance..
Easy to Use: Used on drilling and tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps. Machine taps are suggested to be used with tap collets with overload protection..
Tips: Prone to chipping or breaking due to speed overload or non-vertical tapping. Use the correct tapping too....

Check Stock

Threading & Tapping attachment-lathe tailstock die holder set MT3

Made of High Quality Tool Steel , this is a high quality product for your lathe machine.
Used for threading and tapping purpose on the lathe machine.
Die Holder Sizes 13/16", 1" & 1-1/2" . Tapping Capacity of the Tap Wrench : 1/16" to 1/4" & 1/4" to 1/2".
Comes in precisely ground MT3 Shank, that goes inisde your lathe tailstock & intended job for threading / tapping is hold in rotating chuck..
The Die for threading purpose is hold in the various Die holder sizes. The internal bore threading/ tapping is done by mounting the tap wrench head as....

Check Stock

350PCS Self Tapping Screws Assortment, Black #8 Self Tapping Screws for Metal & Plastic with 410 Stainless Steel, Hex Washer Head & Phillips Round Head Self-Tapping Screws for Building & Repair

【Package Contain】: 10 size of #8 hex washer head & phillips round head self tapping screws assortment kit. Include: #8 x 1'', #8 x 1/2'', #8 x 1-1/4'', #8 x 3/4'', #8 x 5/8'' self tapping screws..
【High Qulity】: This self tapping screws assortment kit was made by high-quality black oxide 410 stainless steel. Have a good corrosion resistance, abrasion resistance & anti-rust, have a better durability and solidity traditional stainless steel..
【2 Head Types】: The self tapping screws assortment kit contain 2 kind head: Hex Washer and Phillips Round Head. The hex washer has stronger bearing capacity and stability and the phillips drive head is convenient and quick to install..
【Widely Application】: Widely used in many fields from construction to medicine. These screws can be used on a wide variety of materials (metal, plastic, aluminum, wood etc), an ideal choice for home improvement project, office, and factory use..
【Well Packaging】: The wood screws assortment kit was stored with a durable transparent box. Each size of screws is placed inside a compartment and clearly labeled, making it easy for you to find, use and store at any time. We will offer a 1-year warranty and a 30-day return guarantee, if you have any issue, just feel free to ....

Check Stock

Threading & Tapping attachment-lathe tailstock die holder set Machine Tools MT2

Made of High Quality Tool Steel , this is a high quality product for your lathe machine.
Used for threading and tapping purpose on the lathe machine.
Die Holder Sizes 13/16", 1" & 1-1/2" . Tapping Capacity of the Tap Wrench : 1/16" to 1/4" & 1/4" to 1/2".
The Die for threading purpose is hold in the various Die holder sizes. The internal bore threading/ tapping is done by mounting the tap wrench head as....
Comes in precisely ground MT2 Shank, , that goes inisde your lathe tailstock & intended job for threading / tapping is hold in rotating chuck..

Check Stock

Door Armor Mini - Door Security Reinforcement Kit for Jamb Frame Strike Plate - DIY Home Security – Bronze

THE ORIGINAL ULTIMATE DOOR SECURITY KIT: All Door Armor Single Door security devices kits come complete with 1 Door Armor Jamb Shield, 2 Door Shields, and two sizes 21 self-tapping screws.
MINI DOOR SHIELDS ARE ANTI DOOR KICK IN: MINI Door Shields slide on the edge of the door and take less than 5 minutes to install.
Require 2 quarters of space between the door and frame for proper installation.
THE DOOR ARMOR JAMB SHIELD IS 46" LONG: The Door Jamb can be protected with this shield, it is cut with knock-out holes that are designed to fit locks spaced from 4.5" to 21.5" apart, (1) is Included in every Door Armor door lock reinforcement Kit.
TORX HEAD SCREWS: Every mini hardware kit includes 17 3-1/2-Inch painted Torx head screws, with self tapping tips and 4 2-1/2-inch painted Torx head screws, with self tapping tips.
REPAIR DAMAGE FROM AN EXISTING KICK-IN: Door Armor can also be used to repair previous damage. Increase your house and apartment security working on your front door security with our great door protector security kit.

Check Stock

LATHE TAILSTOCK TAP & DIE HOLDER SLIDING TYPE SET IN MT2 SHANK

LATHE TAILSTOCK TAP & DIE HOLDER SLIDING TYPE SET IN MT2 SHANK.
Made of High Quality Tool Steel , this is a high quality product for your lathe machine * Used for threading and tapping purpose on the lathe machine.
Die Holder Sizes 13/16", 1" & 1-1/2" . * Tapping Capacity of the Tap Wrench : 1/16" to 1/4" & 1/4" to 1/2".
Comes in precisely ground MT2 Shank, that goes inside your lathe tailstock & intended job for threading / tapping is hold in rotating chuck. * The Die....
The internal bore threading/ tapping is done by mounting the tap wrench head as per tap size between the above advised range is moved toward the....

Check Stock

CalFlor KI75155 VersaBlock Tapping Block FlooringInstallKit

Pull bar and tapping block are built tough to withstand countless floor installations.
Heavy duty tapered pull bar, designed to be used on laminate and engineered flooring.
8 mm reusable, wedge-shaped, stepped expansion spacers.
Solid heavy duty tapping block, not hollow, non-breakable.

Check Stock

100% 304 Stainless Snow Blower Impeller Modification Kit, 3/8inch 3-Blade Universal – Modifies 2-Stage Machine Including Installation Hardware, Repeated and Use Durable in Various Conditions (3)

Product includs:3-Rubber Paddle , 3-Metal Straps , 9-Bolts & Lock Nuts , 3-Self-tapping Screws.
The traditional zinc coated screw, after long time use, will inevitably rust with the nut and become welded together. This makes it impossible to repeat use after unscrewing. Our screws are made of 304 stainless steel, which means it can stand years of harsh environment while being rust-resistant. Because of this, you can expect to use it again and again..
Rubber Paddle 3/8″ thick(2″W x 5″L), Made from Styrene Butadiene rubber (SBR rubber) ,SBR rubber with minimum tensile strength of 725 PSI (5 MPA),Hard rubber with a durometer of 65-75.
Metal Strap with holes – 1 3/8″ W x 3 3/4″L ,Punched flat bar stainless steel materials, 1/16″ thick.
Bolts (5/16-18 x 1 in. coarse thread) w/ 5/16-18 lock nuts (use 1/2″ wrench & socket).
Hex Bolts,Hex lock nuts nylon inser,self-tapping screw (#14 x 1),Sheet metal screw, Hex washer head self drilling, Stainless Steel Materials.
The Purpose of the Kit : This kit reduces the existing “gap” between the snow blower’s impeller blades and the impeller chamber wall. The smaller the gap, the greater your machine’s operational efficiency and snow throwing capability will be, a....

Check Stock

502pc Motherboard Standoffs Screw Kit | Basic Computer Screws Set for HDD Hard Drive, Case, Fan, Power Card, Graphics, Chassis, CD-ROM, ATX Case | for DIY & Repair

{Metric & Imperial Sized Standoffs} Bolt Dropper’s kit has both metric and imperial standoffs offering a 99% fit in all types of mother board installations. Other kits don’t include an imperial size standoff which is necessary in many installations. No need to buy multiple kits to try and find the right size fastener with Bolt Dropper’s..
{502 Piece Kit} The Bolt Dropper PC Screw Kit contains more of the most used screws, nuts, washers, and chassis hand twist screws than others. This way you don’t run out during your build or repair. Other kits contain only a few chassis screws for your case, but Bolt Dropper contains more than double of the next leading brand. The 530-piece kit not only contains more quantity of each but also contains a larger variety & color of fasteners to help you find the right fastener for the right job..
{High Quality Screws} High quality screws with deep cut drives prevent stripping and snapping as well as ensuring a secure fit. When you’re constantly upgrading and removing parts, a screw that doesn’t strip is essential. Bolt Dropper’s precision-made fasteners add a layer of confidence knowing you can add and remove them time and time again without worry of ever stripping a head or snapping a screw..

Check Stock

Professional Flooring Jack for Hardwood Flooring Installing and Positioning

【24 Spacers 1/4”& 1/2”】 Tezoro flooring installation kit provides 24 pack flooring spacers, which has 1/4 inch and 1/2 inch gap, meet your different gap requirements. Made of high-quality PVC, durable and reusable, always staying in place..
【Double-Sided Tapping Block】 Our reinforced tapping block is solid, durable polypropylene body is built to last. At the same time, it is equipped with 3 different edges making it suitable for multiple style of flooring as thin as 3.5 mm or as thick as 15 mm or more!.
【Quality Enhanced Version】 Tezoro Laminate Wood Flooring Installation Kit provides durable Heavy Hammer with non-slip rubber grip. The hammer head is made of high-quality materials, strong and durable, not easy to be broken, which delivers a softened positive strike..
【Reinforced Pull Bar】 Upgraded pull bar is longer, thicker and wider, and it will not be deformed even after long time use. With three high-protection soft pads attached at back to protect the floor..
【Buy Risk Free】 Tezoro laminate flooring installation kit will give you a Lifetime warranty. If you have any problems with the product, please email us and we will serve you wholeheartedly. Package included 24 x spacers.

Check Stock

HAMMOND SDA412 BREATHER KIT

Price For: Each Enclosure Material: Polycarbonate Body Color: Beige External Width - Imperial: 2.6" External Width - Metric: 66.04mm External Depth - Imperial: 1.2" External Depth - Metric: 30mm Kit Contents: Pressure Compensation Plugs RoHS Compliant: Yes.

Check Stock