Top Super 8051 Reviews

Citizen 59-S50342 Original Replacement Black Rubber Watch Band Strap fits BJ8050-08E BJ8051-05E S015791 S025648 S026547 S057892

This item fits the following timepiece(s): B873-S015791, B873-S025648, B873-S026547, B873-S057892, BJ8050-08E, BJ8051-05E.

Check Stock

1.8 inch SPI TFT LCD Display Module for ST7735 128x160 51/AVR/STM32/ARM 8/16 bit

This is a new 1.8 inch serial SPI color display module.
Support analog SPI and hardware SPI. SPI serial, less I/O port need.
Designed with one socket for sd card and PCB adapter for LCD.
The LCD display module can be driven by 8051 / AVR / PIC /ARM/STM32.
The 4D systems lcd display can be driven with at least four IO.

Check Stock

LED LCD Universal TV Backlight Constant Current Backlight Lamp Driver Board Boost Step Up Module 10.8-24V to 15-80V 14-37 Inch

This is a new 1.8 inch serial SPI color display module.
Support analog SPI and hardware SPI. SPI serial, less I/O port need.
Designed with one socket for sd card and PCB adapter for LCD.
It can be driven by 8051 / AVR / PIC /ARM/STM32.

Check Stock

Excelity 3pcs Ultrasonic Module HC-SR04 Distance Sensor with 3pcs Mounting Bracket

[PACKAGE INCLUDED] 3pcs HC-SR04 distance measurement module & 3pcs mounting bracket for installation.
[FEATURE] These module is for distance measuring transducer that working with ultrasonic, they consist of ultrasonic transmitter, receiver, and....
[FUNCTIONAL PARAMETER] Effectual Angle: .
Resolution : 0.3 cm. Power Supply : 5V DC.
[UNIVERSAL COMPATIBILITY] Built in standard interface that can be controlled directly by microcontroller，such as 8051, AVR.
[WORKING PRINCIPLE] Using IO trigger for at least 10us high level signal, when triggered it sends out a series of 40KHz ultrasonic pulses and receives....

Check Stock

AOICRIE 12V 16-Channel Relay Interface Board Module Optocoupler LED LM2576 Power for Arduino DIY Kit PiC ARM AVR

★12V 16-Channel Relay interface board, and each one needs 15-20mA Driver Current.
★Equipped with high-current relay, AC250V 10A.
★The control signal voltage range: the trigger signal is low 0-2V.
★Standard interface that can be controlled directly by microcontroller (for Arduino , 8051, AVR, PIC, DSP, ARM, ARM, MSP433, TTL logic).
★DC 12V 16 Channel Relay Module Interface Board With Optocoupler Protection LM2576 Power for Arduino DIY Kit.

Check Stock

Dorhea 37 in 1 Sensor Modules Kit with Tutorial for R3 Board Mega2560 Mega328 Nano Compatible with IDE Raspberry Pi

37 in 1 sensor module Kit is complete update and common models,compatible with arduino R3, MEGA 2560, NANO and Raspberry pi..
All components compatible with Arduino IDE, can be used directly..
Standard interface can be controlled directly by microcontroller ( 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic)..
Upgraded tutorial only for R3, MEGA2560 R3, NANO in CD, There are tutorials in the CD that comes with..
Complete Update and common models for arduino NANO R3 Mega 2560 starter kit..

Check Stock

Qunqi 4pcs 5V 2 Channel 5V Relay Module with Optocoupler Low Level Trigger Expansion Board Compatible with R3 MEGA 2560 1280 DSP ARM PIC AVR STM32 Raspberry Pi

Indication LED's for Relay output status.
IN: can be high or low level control relay.
Equiped with high-current relay, AC250V 10A.
Standard interface that can be controlled directly by microcontroller (Compatible with , 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic).

Check Stock

kuman Compatible For Arduino Raspberry pi Sensor kit 37 in 1 Robot Projects Starter Kits with Tutorials Compatible for Arduino RPi 3 2 Model B B+ K5

Professional 37-in-1 Sensor Module Kit, NOT ONLY compatible for ARDUINO, BUT ALSO compatible for raspberry pi RPi 3 2 Model B A A+ B+.
Complete Update and common models for arduino Mega 2560 starter kit.
Great sensor kit with tutorials compatible for Arduino and raspberry pi..
Standard interface can be controlled directly by microcontroller ( 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic).
Detailed tutorials including project introduction and source code CAN BE PROVIDED..

Check Stock

Painless Performance 80132 Single Pole, Double Throw Relay, 40 Amp

★ The 8-channel relay module is equipped with transistors, diodes and optocouplers to switch higher loads safely, reliably and with little power. The module is also equipped with generously dimensioned relays in order to be able to reliably carry out many switching processes..
★ 5V 8-channel relay module, each relay requires 70mA for switching (switching capacity AC: max. 250V / 10A.
★ 5V 8-channel relay module can be controlled directly with a microcontroller Raspberry Pi, Arduin, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic, etc..
★ The relay acts as a switch that responds to a signal from the Arduin. Because of this, it is widely used in IoT projects to control lights and other electronic devices..
★ Application: MCU control, PLC control, industrial area, smart home.If you need this relay, you can buy it directly. If there is a problem during use, you can contact us at any time to refund or replace it..

Check Stock

SunFounder 2 Channel DC 5V Relay Module with Optocoupler Low Level Trigger Expansion Board Compatible with Arduino R3 MEGA 2560 1280 DSP ARM PIC AVR STM32 Raspberry Pi

5V 2-Channel Relay interface board, and each one needs 15-20mA Driver Current.
Equiped with high-current relay, AC250V 10A.
Standard interface that can be controlled directly by microcontroller (compatible with Arduino ,Raspberry Pi, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic).
Indication LED's for Relay output status.
Size: 50.5mm(L) x 38.5mm(W) x 18.5mm(H)(1.99inch x 1.54inch x 0.73inch).

Check Stock

Valefod DC 5V Relay Module 1-Channel Relay Switch with Optocoupler Isolation High/Low Level Trigger, Pack of 10

【Control Devices】The 1-channel relay module uses genuine high quality DC5V relay and SMD opto-isolator supporting high/low level trigger, widely apply to control various AC/DC appliances, and other devices with large current..
【Load Range】NO(Normally open) maximum load < AC 250V/10A, < DC 30V/10A. Trigger current of opto-isolator: 5mA..
【Fault-tolerant Design】The relay will not operate even if the control line is disconnected..
【Universal Interface】Equipped with screwed terminal plate and fixed bolt holes(diameter: 3.1 mm) on both sides for easy installation..
【High Compatibility】The relay module can be controlled directly by 5V logic signals from microcontroller(8051, AVR, PIC, DSP, ARM, Raspberry Pi, MSP430, TTL logic etc).

Check Stock

Professional T-wide Adjustable Trimmer Blade for the 5 Star Series Detailer and Cordless Detailer Li for Professional Barbers - Model 2215 Silver

★FITS Model: Wahl Detailer #8290, 5 Star Razor Edger #8051, G-Whiz #8986, Hero #8991, Sterling Definitions #8085. 5 star Detailer Corded. Cordless....
★PROFESSIONAL PRECISION: The double wide Adjustable Trimmer Blade set is intended for professional use only and is designed to deliver the sharp....
★Zero Gap: This blade is designed to provide an extremely close trim. Sharpness blade for smooth cutting Ideal for facial hair and design.....
★Packing: Package contains Professional Double Wide Adjustable Trimmer Blade set. Not include the screw..
★ PREMIUM SUPPORTS - Friendly warranty support without any other costs needed. Fast and easy-to-reach Customer Service to solve your problems within....

Check Stock

Sipytoph 37 in 1 Sensor Kit,37 Sensors Assortment Modules Starter DIY Kit with Box for Arduino Raspberry Pi 4 Pi 3,3B,,RPi A,Model B,B,

This sensor kit includes 37 sensor modules for you to learn basic knowledge about Raspberry Pi and sensors..
Standard interface can be controlled directly by microcontroller ( 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic..
Professional 37-in-1 Sensor Module Kit, Not only compatible for Arduino, but also compatible for Raspberry Pi 3,3B+,RPi A,A+,Model B,B+,2..
The highest cost performance kit for electronic hobbyist and advanced learners to expand Raspberry Pi and for Arduino programming..
With a detachable lattice plastic storage box, it is very easy to store and carry..

Check Stock