Top Stepper Motor Feeding System Reviews

3-Axis 32-bit ARM Based CNC Controller,GRBL 1.1F USB Port CNC Engraving Machine Control Board with Fan Cooling,Support 500W Spindle/NEMA23 Stepper Motor/Laser (A4988+Fan)

  • Model:3 Axis GRBL 1.1F USB Port GRBL Control Board.
  • Input voltage: 12-24VDC .CNC Router Machine Controller board.
  • Compatibility: support 12V/24V laser, TTL/PWM modulation signal, 3P interface and 2P+2P interface.
  • support 775 motor, 200W/300W/500W spindle.
  • support dual Y-axis use, three-axis and two-axis switching use.
  • support X/Y/Z limit switch, Z-axis probe, emergency stop switch.
  • Support stepper motor: 12V, within 2A maximum current, within 1.5A recommended. (Stepper motor 42, 57).⚠️Please check the wire sequence when connecting the stepper motor, the wire sequence may be different for different motors, wrong connection may burn the motor and the motherboard..
  • Support software:LaserGRBL/Lightburn/Candle(3 axis)/Universal Gcode Sender.
  • Tip: Before you connect the motherboard, please carefully check the need to connect the device wire sequence (laser, motor) to prevent a mismatch of wire sequence, burn the device. Customer service 24H online, to provide you with help..
Check Stock

CenryKay 5pcs ULN2003 28BYJ-48 4-Phase Stepper Motor with 5V Drive Board and 10pcs Dupont Wire Male to Female Breadboard Jumper Wires Compatible with Arduino

  • A, B, C, D four-phase LED indicates the status of the stepper motor work..
  • Stepper motor with a standard interface, when used directly pluggable..
  • The motor is gear-reduced, the noise is extremely low, and it can be driven with 5V running smoothly..
  • Drive Module Board Size(in): 1.37*1.18*0.6.
  • Great packing in a box : 5 set Uln2003 Stepper Motor + Driver Board+Dupont Wire ..
Check Stock

3 Axis CNC Kit Nema23 Stepper Motor Dual Shaft 425oz-in 112mm 3A & Driver 40VDC 4A 128 microstep for CNC Router Milling Engraving Machine

  • ♞【Product】3 Axis nema23 stepper motor driver usbcnc controller kit.
  • ♞【Nema 23 Stepper Motor】 Nema 23 Stepper Motor / Holding Torque: 425oz-in,280Ncm / Motor Size:57x57x112mm / Phase:2 / 4pcs lead wire / 1.8 Step.
  • ♞【Stepper Motor Driver】FMD2740C Stepper Motor Driver / 4Amps / Support voltages:12 to 50V DC / 128microstep.
  • ♞【4 Axis USBCNC breakout board】 Come with Hand Control with USB Cable / Only support USBCNC software / input voltage: 15-36V DC..
  • ♞【DC Power Supply】400W 36V 11A DC Switching power supply.
Check Stock

ANNOYTOOLS ARM 32-bit 3-Axis CNC Controller,GRBL 1.1F USB Port CNC Engraving Machine Control Board with Fan Cooling DRV8825 Standalone Driver,Support 500W Spindle/NEMA17/23 Stepper Motor/Laser Module

  • Model:3 Axis GRBL 1.1F USB Port GRBL Control Board.
  • Input voltage: 12-24VDC .CNC Router Machine Controller board.
  • Compatibility: support 12V/24V laser, TTL/PWM modulation signal, 3P interface and 2P+2P interface.
  • support 775 motor, 200W/300W/500W spindle.
  • support dual Y-axis use, three-axis and two-axis switching use.
  • support X/Y/Z limit switch, Z-axis probe, emergency stop switch.
  • Support stepper motor: 12V, within 2A maximum current, within 1.5A recommended. (Stepper motor 42, 57).⚠️Please check the wire sequence when connecting the stepper motor, the wire sequence may be different for different motors, wrong connection may burn the motor and the motherboard..
  • Support software:LaserGRBL/Lightburn/Candle(3 axis)/Universal Gcode Sender.
  • Tip: Before you connect the motherboard, please carefully check the need to connect the device wire sequence (laser, motor) to prevent a mismatch of wire sequence, burn the device. Customer service 24H online, to provide you with help..
Check Stock

Mssoomm 20mm CNC Ballscrew Kit SFU2010 RM2010 Anti-Backlash Ball Screw, L 59.06 inch / 1500mm + Nut + BK/BF15 Bearing End Supports + Coupler + Nut Housing+ Motor Bracket for Nema 23 Stepper Motor

  • Nut + BK15 integrate with Motor Bracket for stepper motor Nema 23/BF15 End support with locknuts and circlips + Flexible coupler + Ball Screw Nut Housing, (The coupler bore for the motor shaft is 8mm in default),Precision C7 Grade.
  • The product can ensure motor shaft, coupling axial, axial bearing hole, and screw axis all in a line strictly, to make the transmission system run more accurately and sturdily, less noise and longer life.
  • The ballscrew is no stick-slip effect, heats up less, reduce driving power required, small starting torque, able to apply high speed and micro-feeding.
  • The material of the bk bearing support and Motor Bracket is cast steel, high hardness, shock resistance and high precision machining.
  • We can provide complete information of the products, the drawing is showed in the image 6.(If you need CAD and 3D modeling files, you could give us Amazon Message), we have full ranges of ballscrew products, any special needs, please let us know.
Check Stock

X27 168 Stepper Motor Kit, Instrument Cluster Gauge Repair Kit Compatible with 03-06 GM Chevy Silverado (35 Led Light Bulbs+7 Motors+Soldering Iron+Solder Sucker+Remove Tool+Flux Rosin Core Solder)

  • COMPATIBILITY - Instrument Cluster Gauge Stepper Motor Repair Kit Compatible with 03-06 GM Chevy Silverados Tahoes Yukons. The instrument cluster repair kit perfectly replacement for the XC5-168, X15-168 ,X25-168 and X27-168 that are in your gauge cluster for 2003 2004 2005 2006 GM GMC Chevy Silverado Trailblazer. Came in your vehicles, Please check whether this X27 168 Stepper Motor Kit fits your vehicles before buying.
  • APPLIED TO - The latest stepper motor, direct replacement for the older and faulty stepper motors. Used for the repair of the speedometer,tachometer,oil pressure gauge,transmission temperature gauge, battery voltage gauge, water temperature gauge or fuel gauge. These gauge cluster repair kit have been redesigned for maximum reliability and quiet operation. Insert the needle as long as you pay attention to the zero pressure can be pressed, remember not to edge pressure.
  • FIX GLITCHES - High-quality motors that meet strict international quality standards to fix common problems caused by stepper motor of your vehicles: gauges dead, chatter, sticking, false / jumpy / inaccurate readings, pegged out to the left or right of the dial, ratchet up or down, sticky needle movement, erratic gauge movement etc. Each gauge of your instrument cluster ....
Check Stock

Mssoomm 16mm CNC Ballscrew Kit SFU1605 RM1605 Anti-Backlash Ball Screw, L 59.06 in/1500mm + Nut + BK/BF12 Bearing End Block Supports + Coupler + Nut Housing+ Motor Bracket for Nema 23 Stepper Motor

  • Nut + BK12 integrate with Motor Bracket for stepper motor Nema 23/BF12 End support with locknuts and circlips + Flexible coupler + Ball Screw Nut Housing, (The coupler bore for the motor shaft is 6.35mm in default),Precision C7 Grade.
  • The product can ensure motor shaft, coupling axial, axial bearing hole, and screw axis all in a line strictly, to make the transmission system run more accurately and sturdily, less noise and longer life.
  • The ballscrew is no stick-slip effect, heats up less, reduce driving power required, small starting torque, able to apply high speed and micro-feeding.
  • The material of the bk bearing support and Motor Bracket is cast steel, high hardness, shock resistance and high precision machining.
  • We can provide complete information of the products, the drawing is showed in the image 6.(If you need CAD and 3D modeling files, you could give us Amazon Message), we have full ranges of ballscrew products, any special needs, please let us know.
Check Stock

6 PCS 28BYJ-48 ULN2003 5V Stepper Motor + ULN2003 Driver Board for Arduino

  • ❃❃ The stepping motor is a kind of mechanical and electrical device that converts electrical pulses into angular displacement. Come with a standard interface, when used directly pluggable..
  • ❃❃ Drive Module Board Size(in): 1.37 * 1.18 * 0.6(in).
  • ❃❃ A, B, C, D four-phase LED indicates the status of the stepper motor work..
  • ❃❃ 5 line 4 phase can be used for ordinary ULN2003 chip driver, Connect to the 2 phase, Support the development board, With convenient use, direct docking..
  • ❃❃ Great packing in a box : 6 PCS ULN2003 Stepper Motor + Driver Board (with a little gift)..
Check Stock

Longruner 5X Geared Stepper Motor 28byj 48 Uln2003 5v Stepper Motor Uln2003 Driver Board with ArduinoIDE (no Wire)

  • 5pcs Stepper motor and driver board compatible with 2560 1280 DSP ARM PIC AVR STM32 Raspberry Pi..
  • Stepper motor with a standard interface. A, B, C, D four-phase LED indicates the status of the stepper motor work..
  • Motor diameter: 1.1 inches.Wire length:9.05 inchs. Stepping angle: 5.625 x 1/64.Reduction ratio: 1/6.Drive Module Board Size:1.26 inchsX1.38inchs. Cable length: about 20cm /8-inch..
  • Great packing in a box : 5 set Uln2003 Stepper Motor + Driver Board..
Check Stock

Twotrees Nema17 Stepper Motor 4 Lead Stepper Motor Nema 17 Motor with 1m Cable 42BYGH 38MM 1.5A 17HS4401S for CNC XYZ 3D Printer

  • High Torque: Twotrees stepper motor Adopting high quality motor steel material, is provided with high torque (42Ncm(60oz.in) ), low self-inductance....
  • Low Resistance: Twotrees stepper motor can get a lower resistance value compared to motors of the same thickness and torque. This considerably....
  • Wide Application: This small stepper motors can be used in various area, such as 3D printer.
  • Excellent Service : CE certified:Each nema 17 stepper motor has undergone a rigorous quality control ex works, can carry out a 24-month quality....
  • What Do You Get: The package includes 1* 38mm Stepper Motor/1pcs 1m 4pins cable and connector (Size: 42mm X 42mm X 38mm/1.65''x1.65''x1.49'' ,NEMA 17....
Check Stock

3Pcs Nema23 Stepper Motor Mount 57 Stepping Motor Mounts Mounting Base Plastic Bracket Clamp Support Holder Fixed Seat for CNC Router Milling Engraving Machine DIY Acessories

  • 【Usage】for Nema23 Stepper Motor Bracket/57 stepper motor.
  • 【size】 57*57*40cm【Material】Plastic.
  • 【Package Includes】3pcs 57 Stepper Motor Mounting Bracket.
  • 【Precise Hold-cutting】This motor mount bracket owns convenient mounting holes. These holes is cut by puncher, perfect matched with the 57 stepper motor..
Check Stock

Befenybay 50mm Effective Travel Length Mini Linear Rail Guide Lead Screw T6x1 with NEMA11 Stepper Motor for DIY CNC Router Parts X Y Z Linear Stage Actuator

  • DURABLE: The slide screw stepper motor made of high quality meterial, strong and durable in use, working voltage DC 9-12V..
  • MAXIMUM LINEAR SPEED: The maximum linear speed of lead screw worm drive stepper motor is 25mm per second..
  • APPLICATION: The DC 12V stepper motor widely used for small devices such as medical equipment, laser engraving machine, etc..
  • PRODUCT PARAMETER: The linear screw stepper motor moves 0.25mm for one step, can use microstep driver if need smaller..
  • NOTE: The stepper motor need a A4988 driver(not included) to drive, can not directly connect to power..
Check Stock

RAMPS 1.4 Control Panel 3D Printer Control Board Reprap Control Board Support 3D Printer Controller Shield Board Module for Ramps 1.4 Reprap Prusa Mendel

  • Fully assembled & tested, no soldering required, Can be extended to control other accessories..
  • It has Cartesian robots and requirements of the extruder, Heated bed control with additional 11A fuse. Fits up to 5 stepper driver board..
  • Three field effect transistors, three heater / fan output ports, three thermistor circuits.A number of expansion boards can be added to the system as long as the main RAMPS board is kept to the top of the stack..
  • The fifth stepper motor output port can be customized as a Z-axis motor or a second extruder.Pololu board foot socket, can be easily replaced or removed..
  • The modular design includes plug in stepper drivers and extruder control electronics on an MEGA shield for easy service, part replacement, upgrade-ability and expansion..
Check Stock