Top Spring Loaded Pressure Relief Valve Reviews

Watts Brass & Tubular 374A 3/4 Boiler Relief Valve

  • 1/4" male NPT 175 PSI Industrial air compressor / tank pressure safety relief valve..
  • Also known as a "Pop Off" or "Blow Off" valve..
  • This relief valve is manufactured in the United States and is stamped with "UV" & "NB" symbols..
  • The relief pressure of this valve is set at 175 PSI and is accurate within + or - 3% of the set pressure..
  • Features a silicone rubber soft seat relief valve to prevent leaks.
Check Stock

Hydraulic Loader Directional Control Valve LV22RFSTKAB Joystick Regen - 10GPM 4000PSI

  • SPECIFICATIONS: Our 2 spool directional control valve for double-acting hydraulic rams has 21 GPM, 3 position spring center and 4 positions, SAE 10 inlet and work ports and SAE 12 outlet ports. This hydraulic flow control valve has 4-way valving, adjustable 1500 with 3625 PSI..
  • VERSATILE: This G series P80 DCV has a 3 position spring center and 4 positions that allows an actuator to open and close. This 2 spool control valve can be used in any hydraulic circuit..
  • PRECISE FLOW: Simple and compact, the hydraulic joystick valve has one spool with a 21 GPM flow rate that precisely controls the direction of the flow of hydraulic fluids. This plow valve has a wide range of applications, including in log splitters..
  • MANUAL CONTROL: This high-pressure control valve comes with a joystick lever actuator for controlling the spool. You can control the log splitter valve manually, without an external, additional control system..
  • TANDEM CENTER: This adjustable relief valve is equipped with a spring tandem center. Since the fluid directly flows back to the hydraulic tank the hydraulic orbit motor prevents overheating and reduces noise during operation..
Check Stock

iPower 6 inch Backdraft Shutter Damper Back Draft Blocker, One-Way Airflow Ducting Insert Backflow Preventer with 2 Inline Springs Loaded Folding Blades, 6\

  • Lightweight valve wings: The valve wings open under the pressure created by the airflow and then automatically close with the spring work. The backflow flap closes automatically at low air volumes. The Backdraft shutter is installed so that the damper blades open only in the outflowing air direction.
  • Keep away from rattling: It has an internal foam strip and a smooth-running spring to keep the valve wings from rattling. The position of the spring should be horizontal for horizontal installations so that it can open and close optimally.
  • One-way airflow ducting insert: Back-flow valve with 2 spring-loaded wings prevents the reverse airflow movement through the ventilation duct when the ventilation system is turned off.
  • Material: The 6 inch Backdraft damper is made out of a Galvanized steel, the flap leaves are made of aluminum, while the Axis and spring are made of stainless steel and can withstand temperatures from 14 to 140 °F.
  • Wide applications: Back draught valves can be inserted into ventilation ducts which are flexible or non-flexible. Designed for use with range hoods, bathroom fans, kitchen and other home HVAC applications. Essential for HVAC ventilation.
Check Stock

OTC 4573 Universal Overhead Valve Spring Compressor

  • OTC's Universal Overhead Valve Spring Compressor is a great option for compressing valve springs - facilitating valve spring removal or valve stem....
  • Ideal for use on installed cylinder heads, especially in vehicles with tight underhood clearances, but can be used for bench work as well.
  • Spring loaded jaws easily grip and compress valve springs.
  • Legs designed with a built-in offset to compensate for spring wind - keeping tool vertical and stable during use.
  • fits valve spring retainers up to 1-13/16 inch diameter.
Check Stock

UPE Group New 1/4 ASME Brass Safety Relief Valve 140 PSI American Made Compressed air pop Off Valve

  • 1/4" male NPT 140 PSI Industrial air compressor / tank pressure safety relief valve..
  • Also known as a "Pop Off" or "Blow Off" valve..
  • This relief valve is manufactured in the United States and is stamped with "UV" & "NB" symbols..
  • The relief pressure of this valve is set at 70 PSI and is accurate within + or - 3% of the set pressure..
  • Features a silicone rubber soft seat relief valve to prevent leaks.
Check Stock

Kuhn RikonDuromatic Stainless-Steel Stockpot Pressure Cooker - 8.4-Qt

  • 8-1/2-quart stockpot pressure cooker with stainless-steel steaming plate.
  • 18/10 stainless-steel body with aluminum core for quick and even heat distribution.
  • Integrated lid-locking system keeps lid secure while cooking.
  • Spring-loaded safety valve with visual pressure indicator pin.
Check Stock

LUMAX LX-1404 Silver 90 Degree Grease Coupler for Hard-to-Reach Grease Fittings on Cars, Trucks, Farm Equipment. Ideal for Lubrication of Front and All-Wheel Drive Vehicles.

  • For use with most hand-operated grease guns.
  • Spring-loaded ball check valve to prevent leakage.
  • Quick connect with a spring loaded sleeve.
  • Designed for hard-to-reach grease fittings.
  • Maximum operating pressure of 4, 500 PSI.
Check Stock

4 Way Gas Distribution Co2 Distributor Manifold With 5/16 inch Barb/Stem Splitter Beer Integrated Check Valves for Homebrew Beer Making Brewing Tool

  • ???? Gas Manifold, Machined from a single piece of aluminum with built-in check valve protects your shunt and prevents gas backflow..
  • ???? Designed with a 2-point screw hole on the top for easy installation to other equipment. 5/16″ threaded ports barbed inlet and 5/16″ barbed outlets..
  • ???? The distributor allows you to split the gas supply into multiple lines. Each line has its own shutoff valve. Chrome Plated valves with spring loaded Ball check valve. Run with 4 lines from one CO2 source..
  • ???? Due to the one-way valve mechanism, the pressure drop between the ball valves in these manifolds is approximately 2 psi. You will need to set the pressure on the regulator to 2 psi above the pressure required in the keg.).
  • ???? Made of prime aluminum, brass and stainless steel material, which is extremely durable. MONEY-BACK GUARANTEE -customer satisfaction is our #1 policy!. If you are not satisfied with our product or if you experience any issues, Please contact us.
Check Stock

Kuhn Rikon Duromatic Stainless-Steel Saucepan Pressure Cooker - 3.7-Qt

  • 3-3/4-quart pressure saucepan made of 18/10 stainless steel that won’t interact with food.
  • Solid thermal aluminum sandwich in bottom for even browning and rapid heat absorption.
  • Five over-pressure safety systems, UL listed.
  • Saves time and 70 percent of energy normally consumed while cooking.
Check Stock

Watts Tankless Water Heater Service Valve Kit

  • TANKLESS WATER HEATER VALVE KIT: Watts LFTWH-FT-HCN service valve kit for tankless water heater valves simplify the installation, maintenance and operation of tankless water heaters..
  • SERVICE VALVE KIT FOR TANKLESS WATER HEATER: The tankless water heater service valve kit replaces up to 18 fittings and 16 connections used in typical tankless water heater installations, color-coded tee handle. Optional pressure relief and check valve..
  • MULTIPLE CONNECTION VALVE KIT: They are available in two valve sets or as a single valve with female threaded, union or quick-connect end options. The service valve kits are available with or without a relief valve. Facilitate service and maintenance with cold water inlet and hot water outlet valves certified to NSF/ANSI 61..
  • LEAD FREE VALVE KIT: The wetted surface of our Lead Free products contacted by consumable water contain less than one quarter of one percent (0.25 percent) of lead by weight..
  • WATER SERVICE VALVE KIT: Purge/drain ports allow regular cleaning to remove scale build-up. The kit includes LF4L - Lead free poppet type pressure relief valves for protection against excessive pressure and LFTWH - Lead Free Tankless Water Heater Valves..
Check Stock

iPower 4 inch Backdraft Shutter Damper Back Draft Blocker, One-Way Airflow Ducting Insert Backflow Preventer with 2 Inline Springs Loaded Folding Blades, 4", HVAC Extractor Fan Vent, Range Hoods

  • Lightweight valve wings: The valve wings open under the pressure created by the airflow and then automatically close with the spring work. The backflow flap closes automatically at low air volumes. The Backdraft shutter is installed so that the damper blades open only in the outflowing air direction.
  • Keep away from rattling: It has an internal foam strip and a smooth-running spring to keep the valve wings from rattling. The position of the spring should be horizontal for horizontal installations so that it can open and close optimally.
  • One-way airflow ducting insert: Back-flow valve with 2 spring-loaded wings prevents the reverse airflow movement through the ventilation duct when the ventilation system is turned off.
  • Material: The 4 inch Backdraft damper is made out of a Galvanized steel, the flap leaves are made of aluminum, while the Axis and spring are made of stainless steel and can withstand temperatures from 14 to 140 °F.
  • Wide applications: Back draught valves can be inserted into ventilation ducts which are flexible or non-flexible. Designed for use with range hoods, bathro....
Check Stock

Kuhn Rikon Pressure Cooker Set Duromatic INOX mit Seitengriff 4 & 6 Litre, Set of 2-4 Litre/24 cm and 6 Litre/24 cm, Silver

  • 4 litre and 6 litre (both 24 cm diameter) pressure cooker – can be used to prepare a huge variety of foods/meals.
  • Feature an advanced, spring-loaded valve that accurately reflects the internal pressure within the pan (allows precise cooking times/eradicates the guesswork that can cause spoilage).
  • Extremely quiet – valve also eliminates the noise/hissing that is traditionally associated with pressure cookers.
  • Designed for optimal safety – automatic locking system prevents removal of the lid whilst pressure exists within the pan.
  • Multiple steam release back-up systems offset excess/unwanted rises in pressure.
  • Crafted from premium-quality, polished, 18/10 stainless steel that is rust, corrosion and chip-resistant.
  • Superthermic aluminium base enables rapid absorption/even distribution of heat and is compatible with all stovetops (including induction).
  • Designed and manufactured in Switzerland since 1949.
Check Stock

Hydraulic Directional Control Valve 5 Spool 13 GPM 3600 PSI SAE Ports 4 Way 3 Positions Double Acting Hydraulic Valve for Tractors Loaders Tanks Loaders Log Splitters

  • SPECIFICATIONS: This log splitter hydraulic flow control valve has a 2-spool, 3-way construction with a processing rate of 18 GPM, ¾” NPT inlet and outlet ports, ½” NPT work ports, and withstands 3625 PSI pressure. It weighs only 5 lb (2.26 kg)..
  • POWER PACKED: With a processing rate of 18 GPM, the hydraulic valve log splitter is way more powerful and efficient than normally available options. This log splitter valve with one spool can split heavy, dense logs in minimal time..
  • HIGH TOLERANCE: This wood splitter valve control with a hydraulic relief valve tolerates pressure up to 3625 PSI. This prevents internal damage to the hydraulic valve handle even when it is being used to exert intense pressure..
  • FAST ACTION: Our wood splitter valve control has a 4 way, 3 position tandem spring center that extends the cylinder’s piston rapidly and helps in high-speed, high precision log splitting. Chief’s hydraulic valve 1 spool is simple and fast..
  • TIME SAVING: Our log splitter valve has an auto return detent lever handle. You can position the next log to be split while the piston repositions itself. The log splitter auto return detent makes log splitting convenient and quick..
Check Stock