Top Electric Pressure Relief Valve Reviews

American Standard CE-6-AS 6 gallon Point of Use Electric Water Heater

  • Inner Dura glas lined tank fired at 1,600°f for optimum protection from the effects of corrosion.
  • Factory installed Brass drain valve on all models allows for easy draining of the unit which reduces sediment deposits extending tank life.
  • Factory installed Brass temperature/pressure relief valve.
  • American standard point-of-use electric water heaters are all certified at 300 psi test pressure and 150 psi working pressure. All tanks are also 100% hydrostatically tested at the factory.
Check Stock

VEVOR 1.5KW Electric Rebar Bender, 1''(25mm) Hydraulic Electric Hand Held Rebar Bender & Happybuy Electric Rebar Cutter, 1.7KW 110V Electric Hydraulic Rebar Cutter

  • Product 1: 0 - 90 Degrees Excellent Performance: This electric rebar bender is designed with excellent performance. It helps save valuable person-hours by bending rebar 1/4'' to 1" (6 to 25 mm) within 5 seconds. 1/4'' / 6 mm #2 Rebar(0-55°), 1'' / 25 mm #8 Rebar(0-90°). It is able to satisfy your various bending demands..
  • Product 1: 1500W Pure Copper Coil Motor: This portable rebar bender features a 1500W pure copper coil motor, which can run quietly with low noise and significantly improve your working efficiency, reducing unnecessary wear. Besides, a copper motor can extend this rebar bending machine's operating life to a large extent..
  • Product 1: Sturdy Machine Body & Head: The electric bender machine adopts the sturdy machine body and high-intensity hook, which are stronger and not easy to break. It can stand super-hard rebar with strong clamping force, which can help to reduce steel rebar waste. Multiple screws fixed on the head enforce the stability and sealing..
  • Product 1: Precision Pressure Relief Valve: This hydraulic rebar bender features a precision pressure relief valve and a hydraulic-powered piston for strong thrust and less power consumption. After the steel bar is successfully bent, you can pull the pressure relief valve to move the st....
Check Stock

UPE Group New 1/4 ASME Brass Safety Relief Valve 140 PSI American Made Compressed air pop Off Valve

  • 1/4" male NPT 140 PSI Industrial air compressor / tank pressure safety relief valve..
  • Also known as a "Pop Off" or "Blow Off" valve..
  • This relief valve is manufactured in the United States and is stamped with "UV" & "NB" symbols..
  • The relief pressure of this valve is set at 70 PSI and is accurate within + or - 3% of the set pressure..
  • Features a silicone rubber soft seat relief valve to prevent leaks.
Check Stock

YAKIMA, RoadShower 7G

  • The Patented Design is built strong with welded aluminum construction and durable powder coat finish..
  • Pressurize the tank through the Schrader air valve or a garden hose..
  • Pressurize with hand or electric pump - Built-in pressure relief valve safely and automatically tops out at 55 psi (max)..
Check Stock

PPE Race Fuel Valve for 2004.5-2010 Duramax LLY/LBZ/LMM 113073000 with PPE Viton O-Ring Upgrade for PPE Race Fuel Valve

  • The PPE Race Fuel Valve (heat treated stainless steel construction) replaces stock or a shimmed pressure relief valve..
  • This valve helps maintain fuel rail pressure during high engine load conditions by completely blocking the pressure relief port (effectively eliminating fuel return to the fuel tank). It eliminates potential low fuel rail pressure DTC codes P1093 or P0087 (low fuel rail pressure during power enrichment) that are caused by insufficient PRV spring pressure..
  • Kit Includes PPE Viton O-Ring 1137073001.
Check Stock

Watts Tankless Water Heater Service Valve Kit

  • TANKLESS WATER HEATER VALVE KIT: Watts LFTWH-FT-HCN service valve kit for tankless water heater valves simplify the installation, maintenance and operation of tankless water heaters..
  • SERVICE VALVE KIT FOR TANKLESS WATER HEATER: The tankless water heater service valve kit replaces up to 18 fittings and 16 connections used in typical tankless water heater installations, color-coded tee handle. Optional pressure relief and check valve..
  • MULTIPLE CONNECTION VALVE KIT: They are available in two valve sets or as a single valve with female threaded, union or quick-connect end options. The service valve kits are available with or without a relief valve. Facilitate service and maintenance with cold water inlet and hot water outlet valves certified to NSF/ANSI 61..
  • LEAD FREE VALVE KIT: The wetted surface of our Lead Free products contacted by consumable water contain less than one quarter of one percent (0.25 percent) of lead by weight..
  • WATER SERVICE VALVE KIT: Purge/drain ports allow regular cleaning to remove scale build-up. The kit includes LF4L - Lead free poppet type pressure relief valves for protection against excessive pressure and LFTWH - Lead Free Tankless Water Heater Valves..
Check Stock

Buffalo QCP412 12-Quart Stainless Steel Pressure Cooker [Classic series]

  • Exclusively made from BUFFALO Clad, its thermal conductivity is faster and more even than conventional stainless steel cookware.
  • Buffalo Pressure Cooker also manage to obtain ISO 9001 : 2000 and Safety Goods (SG) Certificate from Japan..
  • German gear with mortise and tenon joint design, simple switch, safe, durable and easy cleaning.
  • Pressure indication valve, relieve pressure easily/ Emergency pressure relief safety device.
  • Suitable for use on gas stove, electric stove, induction cooker and ceramics furnace..
Check Stock

Unisex Adult Steampunk Gas Mask Costume Accessory, Gold, One Size

  • TANKLESS WATER HEATER VALVE KIT: Watts LFTWH-FT-HCN service valve kit for tankless water heater valves simplify the installation, maintenance and operation of tankless water heaters..
  • SERVICE VALVE KIT FOR TANKLESS WATER HEATER: The tankless water heater service valve kit replaces up to 18 fittings and 16 connections used in typical tankless water heater installations, color-coded tee handle. Optional pressure relief and check valve..
  • MULTIPLE CONNECTION VALVE KIT: They are available in two valve sets or as a single valve with female threaded, union or quick-connect end options. The service valve kits are available with or without a relief valve. Facilitate service and maintenance with cold water inlet and hot water outlet valves certified to NSF/ANSI 61..
  • LEAD FREE VALVE KIT: The wetted surface of our Lead Free products contacted by consumable water contain less than one quarter of one percent (0.25 percent) of lead by weight..
  • WATER SERVICE VALVE KIT: Purge/drain ports allow regular cleaning to remove scale build-up. The kit includes LF4L - Lead free poppet type pressure relief valves for protection against excessive pressure and LFTWH - Lead Free Tankless Water Heater Valves..
Check Stock

2\ (50 mm) ToolMaker's Parallel Clamp CRAFT DIY Tool

  • ...aling, no oil leakage, reliable use. Thickened plunger has high wear resistance and long service life..
  • 【INTEGRAL PORTABLE DESIGN】 Huanyu Integral hydraulic flange separator is handheld, easy to carry and can be easily operated by one person. No external tank or hose required. Thickened insulating handle is anti-electric, non-slip.Comfortable grip, more labor-saving. A plastic storage box is included, which is shockproof, portable, easy to carry..
  • 【EASY TO OPERATE】 Rotate the pressure relief valve switch to operate. Rotate in (on) direction during pressurization and (off) direction during pressure relief. Suitable for pipeline maintenance, repairment, inspection and valve replacement etc..
  • 【EXCELLENT SERVICE】 We provide 1 year warranty on all products in our store. For damaged parts, we will resend a new one free of charge for customers to replace. Besides, we provide one-to-one online after-sales consultation service for every consumer with high efficiency, bringing you worry free shopping experience..
Check Stock

Pop-It Tool P95-525 Flange Spreader

  • ...aling, no oil leakage, reliable use. Thickened plunger has high wear resistance and long service life..
  • 【INTEGRAL PORTABLE DESIGN】 Huanyu Integral hydraulic flange separator is handheld, easy to carry and can be easily operated by one person. No external tank or hose required. Thickened insulating handle is anti-electric, non-slip.Comfortable grip, more labor-saving. A plastic storage box is included, which is shockproof, portable, easy to carry..
  • 【EASY TO OPERATE】 Rotate the pressure relief valve switch to operate. Rotate in (on) direction during pressurization and (off) direction during pressure relief. Suitable for pipeline maintenance, repairment, inspection and valve replacement etc..
  • 【EXCELLENT SERVICE】 We provide 1 year warranty on all products in our store. For damaged parts, we will resend a new one free of charge for customers to replace. Besides, we provide one-to-one online after-sales consultation service for every consumer with high efficiency, bringing you worry free shopping experience..
Check Stock

Acecare Charging Station Also Called Filling staion for Compressed air refilling

  • CONNECT. Connect compressor with valve to fill gases to tanks or pcp air guns..
  • WITH GAUGE. It is with gauge that shows the pressure in the tank or gun that receive the gases..
  • EASY TO INSTALL. It is easy to connect the valve and compressor, just very few steps..
  • WITH PRESSURE RELIEF KNOB. It is with pressure relief knob that will relief the rest pressure in hose to keep it safe when you take off it from valve..
  • WITH HOSE. The filling staion is with hose on it, and you do not need to prepare another hose when you fill gases..
Check Stock

SMACO Scuba Tank 1L Mini Scuba Tank S400 Scuba Diving Tank Diving Equipment

  • ...e underwater. You can also split regulator and tank body and put them in the portable case, then you can take them on plane to diving in any place..
  • ✅【PERFECT COMPATIBILITY】 : The scuba tank’s inflation interface is 8mm, and the work pressure is 3000Psi/200Bar/20Mpa. It has three inflate ways: scuba adapter, electric pump and SMACO high pressure hand pump. When inflate with electric pump, please equipped with oil-water separator.
  • when use other hand pumps, please make sure it can reach up to 3000Psi. NOTE: using the hand pump to reach up to 3000Psi is tired, it takes about 30-45 minutes, we suggest to use it as a backup inflation devices..
  • ✅【HIGHT QUALITY MINI SCUBA TANK】: The tank body was made of aviation aluminum, can better resists to seawater corrosion and stands up well to damage. The regulator include inflation interface(8mm), pressure gauge, air switch, explosion valve, constant pressure valve. and the second-stage valve include mouthpiece, relief valve and breath tube. When normal used, all the parts could work for at least 2 years, and we also provide some free accessories in the accessories bag..
  • ✅【PROFESSIONAL SCUBA TANK WITH DOT CERTIFIED 】:Our mini scuba tank have the CE certified in EU and DOT certified in US, it can b....
Check Stock

Tool Daily Thermal Release Valve for Pressure Washer Pump, 1/4 Inch NPT, 2-Pack

  • Fitting: 1/4″ NPT. The outside diameter of male thread is 0.54 inch. Include 2 pieces pressure washer release valve..
  • Compatible with many brands, such as Generac,Homelite, Karcher, Briggs, Power Stroke, Husky, Black Max, Craftsman, Him Ore and Ridged pressure washers. Replaces Homelite part numbers 678169004, 678169002 and 678169001. Replaces Briggs and Stratton parts 208673GS, 21783GS, 194298GS and B3090GS..
  • Thermal Relief Valve protects pressure washer pumps operating in a safe temperature range to prevent overheating. When water temperature reaches above 145º F, pump seals may fail. The thermal relief valve will open to release hot water and allow cold water to enter the pump. So it continues to operate at a safe temperature. If the pump have ever overheated, the thermal relief valve must be replaced..
  • Made of brass. Max. inlet pressure of pumps is 200 PSI..
  • Quick reply within 10 hours. Any issue or question, please free to contact with us..
Check Stock