Top Split Core Current Transducer Reviews

PEACEFAIR PZCT-02 Split Core Current Transformer Coil Sensor for 100A Amp Energy Meter

  • SMALL AND LIGHT: This current transformer Built-in input coil.
  • SNAP JOINT STRUCTURE:The diameter of inner hole is 16mm, the accuracy is 0.5 grade, Using snap joint structure, it can be fixed to the cable directly through nylon ties..
  • GOOD MECHANICAL PROPERTIES: Fully enclosed, good mechanical properties and environmental resistance, strong voltage isolation capability, safety and reliability..
  • USED FOR ENERGY METER IN SPECIAL: Current transducer used for energy meter in special.
  • AC 220v, 380v power supply can both be applied..
  • MINI SIZE:This is a mini split base current transformer.
  • it's the smallest one compared to the similar products (output 100MA)..
Check Stock

CENTAURUS SCT-013-000 Split Core Current Transformer Sensor Non-invasive SCT013000 AC Current Split Core Transformer Sensor SCT-013-000 100A/50mA

  • 【OPTIMAL PERFORMANCE】CENTAURUS premium upgrade SCT-013-000 Current Transformer Sensor is used for current measuring, monitoring and protection of AC motors, lighting equipment, air compressors, etc..
  • 【HIGH QUALITY】CENTAURUS premium SCT-013-000 AC Current Transformer Sensor is made of high quality Ferrite material which can use for a long time.This split core current transformer is particularly suitable for DIY use and it works well with arduino and raspberry pi..
  • 【MAIN SPECIFICATION】Opening size: 13mm×13mm, fully compatible with most similar products.
  • The lead length is 1.5 meters, the standard Φ3.5 three-core plug output..
  • 【OPTIMAL RELIABILITY】CENTAURUS SCT-013-000 AC Current Transformer Sensor has two forms of output current, voltage (voltage output built-in the sampling resistor).Non-linearity ±3% (10%~120% rated input current)..
  • 【PACKAGE & SERVICE】Package Include: 1Pcs x SCT-013-000 Split Core Current Transformer Sensor .Any question Pls fell free to contact us, we will reply you within 24H.And we offer a 12 month warranty..
Check Stock

DUNSI SCT-013-000 Split Core Current Transformer Sensor Non-invasive SCT013000 AC Current Split Core Transformer Sensor SCT-013-000 100A/50mA

  • 【HIGH QUALITY】DUNSI premium SCT-013-000 AC Current Transformer Sensor is made of high quality Ferrite material which can use for a long time.This split core current transformer is particularly suitable for DIY use and it works well with arduino and raspberry pi..
  • 【MAIN SPECIFICATION】Opening size: 13mm×13mm, fully compatible with most similar products.
  • The lead length is 1.5 meters, the standard Φ3.5 three-core plug output..
  • 【OPTIMAL PERFORMANCE】DUNSI premium upgrade SCT-013-000 Current Transformer Sensor is used for current measuring, monitoring and protection of AC motors, lighting equipment, air compressors, etc..
  • 【OPTIMAL RELIABILITY】DUNSI SCT-013-000 AC Current Transformer Sensor has two forms of output current, voltage (voltage output built-in the sampling resistor).Non-linearity ±3% (10%~120% rated input current)..
  • 【PACKAGE & SERVICE】Package Include: 1Pcs x SCT-013-000 Split Core Current Transformer Sensor .Any question Pls fell free to contact us, we will reply you within 24H.And we offer a 12 month warranty..
Check Stock

Current Transmitter Current Transducer Transmitter Transformer Sensor AC Current Converter 0-50A

  • Mutual inductance current monitoring, high current detection accuracy, stable performance, safe isolation of input and output..
  • The measured current of this current transmitter is AC 0-10A/20A/50A.
  • The output signal of this current transducer is DC: 0‑5V/0‑10V/4‑20mA 3 forms are optional..
  • With strong overload capacity, high accuracy, high isolation, high safety, low power consumption.
  • through‑core structure design, isolation withstand voltage up to 2000VAC.
  • hysteresis less than 1%, can be used under strong magnetic field conditions..
  • The shell is made of self-extinguishing material ABS.
  • it is easy to install and use, and there is no need to connect DC in series in the circuit when measuring..
Check Stock

4Pcs 100A/50mA SCT013000 Non-invasive Split Transformer Sensor SCT-013-000 Split Core Current Sensor Transformer

  • ❤Applications❤Suitable for current measuring, monitoring and protection of AC motors, lighting equipment, air compressors, etc..
  • ❤Reliability❤Fully compatible with most similar products.
  • the number of opening and closing times is not less than 1000 (tested at 20℃).
  • this split core current transformer is particularly suitable which can use for a long time for DIY use and it works well with arduino and raspberry pi..
  • ❤Specification❤Opening size: 13mm × 13mm.
  • lead length: 1.5 meters, standard Φ3.5 three-pin plug outpu.
  • Non-linearity ± 3% (10% ~ 120% rated input current) two output forms of current and voltage (voltage output type built-in sampling resistor)..
  • Package Include 4Pcs x SCT-013-000 Split Core Current Transformer Sensor.
Check Stock

AC Current Sensor Transformer, PZCT-02 Split Core Current Transformer Coil Sensor for 100A Amp Energy Meter Used for Energy Meter in Special,Current Sensors

  • ❤Specification❤Opening size: 13mm × 13mm.
  • lead length: 1.5 meters, standard Φ3.5 three-pin plug outpu.
  • ❤Applications❤Suitable for current measuring, monitoring and protection of AC motors, lighting equipment, air compressors, etc..
  • ❤Reliability❤Fully compatible with most similar products.
  • the number of opening and closing times is not less than 1000 (tested at 20℃).
  • this split core current transformer is particularly suitable which can use for a long time for DIY use and it works well with arduino and raspberry pi..
  • Non-linearity ± 3% (10% ~ 120% rated input current) two output forms of current and voltage (voltage output type built-in sampling resistor)..
  • Package Include 2Pcs x SCT-013-000 Split Core Current Transformer Sensor.
Check Stock

1PCS SCT013-015 15A 1V Non-invasive Split Core Current Transformer Sensor

  • Non-invasive Split Core Current Transformer.
  • 1.5m leading wire,3.5 3 core plug standard output.Two form of output current, voltage (voltage output built-in the sampling resistor).
Check Stock

Current Transducer, SZT15-CH-420E Current Transducer Transmitter Transformer Sensor AC Current Converter 0-50A,Stable Performance

  • 【DC Current Output Signal】 - The SZT15-CH-420E AC current transducer provides real-time isolated measurement of AC current in the grid or circuit and converts it to a 0-5V / 0-10V or 4-20mA DC current output signal ..
  • 【Withstand Voltage】 - Through-heart structure design, insulation withstand voltage up to 2000V AC. The measured current AC: 0-10A / 20A / 50A can be selected..
  • 【Usage】 - Magnetic hysteresis less than 1%, can be used in strong magnetic field conditions. The current transducer is used for AC current monitoring, detection, current overload protection, and is also used as an electronic switch for automatic control systems..
  • 【High Performance】 - The outer casing is made of self-extinguishing material, it has the characteristics of strong overload ability, high precision, high isolation, high security, low power consumption and strong anti-interference ability..
  • 【Easy To Installation】 - There is no need to connect the dc series into the circuit during measurement, safe isolation of input and output. It is suitable for various applications requiring current and voltage conversion..
Check Stock

Humminbird 411530-1CHO SOLIX 10 Chirp MEGA SI+ G3 CHO (Control Head Only) Fish Finder

  • 10.1" Cross Touch touchscreen display with customizable views and settings that allow you to see multiple technologies at once.
  • Features MEGA Side Imaging+, MEGA Down Imaging+, Dual Spectrum CHIRP Sonar, Humminbird Basemap, AutoChart Live, Wi-Fi, NMEA 2000, Bluetooth and Ethernet networking.
  • Control Head Only Model: This model does not include a transducer. This CHO model is a great choice for those looking to connect to connect to Built-in MEGA Imaging on Minn Kota trolling motors, accessory transducer options like MEGA 360 Imaging, or share sonar data from an existing Humminbird Ethernet network.
  • Dual Core Processor: Perform any task with speed and ease, thanks to the ultra-responsive interface and upgraded processing power.
  • Airmar Transducer ID: For those looking to install accessory 2D Airmar transducers, SOLIX G3 provides transducer ID to make for fast and simple setup.
Check Stock

Leviton 800-5372-8K 30 Amp Flush Mount Dryer Receptacle

  • Certified to all applicable standards of ANSI C12.1.
  • Equipped with both Isolated Pulse Output and RS-485 Serial Port (Modbus Native) standard for easy interface with most AMR and BAS systems.
  • Utilizes revenue grade 0.3 accuracy class 0.1A secondary solid core current transformers (CTs) that conform to all applicable ANSI requirements or 1-Percent accuracy split-core CTs.
  • Up to three sets of CTs per phase can be paralleled per meter.
Check Stock

Humminbird 411640-1CHO HELIX 7 CHIRP MDI GPS G4N (Control Head Only) Fish Finder

  • 7" ultra-wide display gives you ample room to view the many pre-loaded split screen view options.
  • Features MEGA Down Imaging, Dual Spectrum CHIRP Sonar, ethernet networking capability, Bluetooth connectivity, AutoChart Live, GPS and Humminbird Basemap built-in.
  • MEGA Down Imaging: Get unprecedented underwater clarity with coverage down to 125 feet below your boat. You'll unlock new details with up to 3X more output than standard Down Imaging sonar.
  • Dual Spectrum CHIRP: Before you cast, know what's down there thanks to long, well-defined fish arches, and a clear view of fish-holding structure and the bottom. Powered by our proprietary, Low Q CHIRP transducer, Dual Spectrum offers two ways to search: wide mode for maximum coverage and narrow mode for maximum detail.
  • Control Head Only unit—Transducer is not included. An accessory transducer of choice can be purchased to suit your install and application needs. This model is also compatible with Minn Kota Built-in MEGA DI trolling motors.
Check Stock

Surecom SW-102HF 1.5-70MHz V.S.W.R. & Power Meter

  • Certified to all applicable standards of ANSI C12.1.
  • Equipped with both Isolated Pulse Output and RS-485 Serial Port (Modbus Native) standard for easy interface with most AMR and BAS systems.
  • Utilizes revenue grade 0.3 accuracy class 0.1A secondary solid core current transformers (CTs) that conform to all applicable ANSI requirements or 1-Percent accuracy split-core CTs.
  • Up to three sets of CTs per phase can be paralleled per meter.
Check Stock

DAE V-75 Vertical Water Meter, 3/4” NPT Couplings, Measuring in Gallons

  • Certified to all applicable standards of ANSI C12.1.
  • Equipped with both Isolated Pulse Output and RS-485 Serial Port (Modbus Native) standard for easy interface with most AMR and BAS systems.
  • Utilizes revenue grade 0.3 accuracy class 0.1A secondary solid core current transformers (CTs) that conform to all applicable ANSI requirements or 1-Percent accuracy split-core CTs.
  • Up to three sets of CTs per phase can be paralleled per meter.
Check Stock