Top Split Core Ct Current Reviews

4Pcs 100A/50mA SCT013000 Non-invasive Split Transformer Sensor SCT-013-000 Split Core Current Sensor Transformer

  • ❤Applications❤Suitable for current measuring, monitoring and protection of AC motors, lighting equipment, air compressors, etc..
  • ❤Reliability❤Fully compatible with most similar products.
  • the number of opening and closing times is not less than 1000 (tested at 20℃).
  • this split core current transformer is particularly suitable which can use for a long time for DIY use and it works well with arduino and raspberry pi..
  • ❤Specification❤Opening size: 13mm × 13mm.
  • lead length: 1.5 meters, standard Φ3.5 three-pin plug outpu.
  • Non-linearity ± 3% (10% ~ 120% rated input current) two output forms of current and voltage (voltage output type built-in sampling resistor)..
  • Package Include 4Pcs x SCT-013-000 Split Core Current Transformer Sensor.
Check Stock

AC Current Sensor Transformer, PZCT-02 Split Core Current Transformer Coil Sensor for 100A Amp Energy Meter Used for Energy Meter in Special,Current Sensors

  • ❤Specification❤Opening size: 13mm × 13mm.
  • lead length: 1.5 meters, standard Φ3.5 three-pin plug outpu.
  • ❤Applications❤Suitable for current measuring, monitoring and protection of AC motors, lighting equipment, air compressors, etc..
  • ❤Reliability❤Fully compatible with most similar products.
  • the number of opening and closing times is not less than 1000 (tested at 20℃).
  • this split core current transformer is particularly suitable which can use for a long time for DIY use and it works well with arduino and raspberry pi..
  • Non-linearity ± 3% (10% ~ 120% rated input current) two output forms of current and voltage (voltage output type built-in sampling resistor)..
  • Package Include 2Pcs x SCT-013-000 Split Core Current Transformer Sensor.
Check Stock

1PCS SCT013-015 15A 1V Non-invasive Split Core Current Transformer Sensor

  • Non-invasive Split Core Current Transformer.
  • 1.5m leading wire,3.5 3 core plug standard output.Two form of output current, voltage (voltage output built-in the sampling resistor).
Check Stock

EKM Metering - 13mm 200A Split-Core Current Transformer

  • Operable Split Core CT for Easy installation.
  • The combination of our meters with these CTs is Accuracy Class 0.5 (+/-0.5%).
Check Stock

Fluke 375 FC True-RMS 600A AC/DC Wireless Clamp Meter

  • Dual action jaw Light and slim body design Easy clamping in narrow locations Safe and easy operation Independent opening, double lever design Eliminates magnetization induced heat and noise, even in heavy current measurement No metal (iron core) exposureMeasure the fundamental waveform component using the average rectified method.
  • Measure the fundamental waveform component using the average rectified method.
  • Expanded -25 °C to 65 °C operating temperature range.
  • Connect the CT6280 flexible sensor to measure up to 4199 A in thick or paired wires.
  • Hioki flexible sensor CT6280 on the last image is not included (purchase required separately) and Drop proof design withstands drop from a height of 1 meter.
Check Stock

YFYIQI ETCR007AD AC DC Clamp Leakage Current Probe Sensor Transducer Clamp Meter Sensor with Output Connector BNC Plug Clamp CT Size 7mm

  • ☀☀(1)ETCR007AD AC-DC Clamp Leakage Current Sensor, suitable for high-accuracy AC and DC current and leakage current on-line detection below 600V, range: AC/DC 0mA~60A, corresponding output AC/DC 0~600mV, jaw size is Φ7mm.
  • ☀☀(2)The sensor adopts the clamp-shaped CT structure, which can be measured without disconnecting the measured circuit. The slim design of the clamp head is particularly suitable for the place where the cable is densely packed. The permalloy iron core is used, and the anti-interference ability is strong to ensure the accuracy of measurement. stability..
  • ☀☀(3)Widely used in power, communications, meteorology, railways, automotive industry, oil fields, construction, measurement, research and teaching units, industrial and mining enterprises and other fields..
  • ☀☀(4)Detection method: Clamp CT, non-contact measurement.
  • ☀☀(5)Voltage output: Two-speed output: 0mA~6A, 100mV/A.
  • Zero adjustment: Adjust ZERO key can be zero, eliminate the interference of geomagnetic field and external electric field.
Check Stock

Leviton 800-5372-8K 30 Amp Flush Mount Dryer Receptacle

  • Certified to all applicable standards of ANSI C12.1.
  • Equipped with both Isolated Pulse Output and RS-485 Serial Port (Modbus Native) standard for easy interface with most AMR and BAS systems.
  • Utilizes revenue grade 0.3 accuracy class 0.1A secondary solid core current transformers (CTs) that conform to all applicable ANSI requirements or 1-Percent accuracy split-core CTs.
  • Up to three sets of CTs per phase can be paralleled per meter.
Check Stock

Surecom SW-102HF 1.5-70MHz V.S.W.R. & Power Meter

  • Certified to all applicable standards of ANSI C12.1.
  • Equipped with both Isolated Pulse Output and RS-485 Serial Port (Modbus Native) standard for easy interface with most AMR and BAS systems.
  • Utilizes revenue grade 0.3 accuracy class 0.1A secondary solid core current transformers (CTs) that conform to all applicable ANSI requirements or 1-Percent accuracy split-core CTs.
  • Up to three sets of CTs per phase can be paralleled per meter.
Check Stock

Hainar Digital Clamp Meter Multimeter 4000 Counts Auto-ranging AC/DC Voltage & Current Tester with Resistance, Capacitance, Frequency, Continuity, Diode Test, Non-Contact Detection

  • Dual action jaw Light and slim body design Easy clamping in narrow locations Safe and easy operation Independent opening, double lever design Eliminates magnetization induced heat and noise, even in heavy current measurement No metal (iron core) exposureMeasure the fundamental waveform component using the average rectified method.
  • Measure the fundamental waveform component using the average rectified method.
  • Expanded -25 °C to 65 °C operating temperature range.
  • Connect the CT6280 flexible sensor to measure up to 4199 A in thick or paired wires.
  • Hioki flexible sensor CT6280 on the last image is not included (purchase required separately) and Drop proof design withstands drop from a height of 1 meter.
Check Stock

DAE V-75 Vertical Water Meter, 3/4” NPT Couplings, Measuring in Gallons

  • Certified to all applicable standards of ANSI C12.1.
  • Equipped with both Isolated Pulse Output and RS-485 Serial Port (Modbus Native) standard for easy interface with most AMR and BAS systems.
  • Utilizes revenue grade 0.3 accuracy class 0.1A secondary solid core current transformers (CTs) that conform to all applicable ANSI requirements or 1-Percent accuracy split-core CTs.
  • Up to three sets of CTs per phase can be paralleled per meter.
Check Stock

LIANSUM 9V AC DC Adapter Power Cord for Casio Keyboard Piano WK-110 WK-200 PRO-100 PRO-200 MA-220 LD-50 HT-700 CA-100 Replacement Original Chargers AD-5MU / AD-5MR Supply Cable

  • Product parameters: Input: AC 100-240V, 50-60Hz / Output: DC 9V 1A. Power cable: 6.5 feet (2m). Negative (-) tip connector.
  • Security: CE / FCC / RoHS Listed. Special design and materials ensure that provide the best current output connected to your device. Prevent short....
  • Compatible: Replacement power adapter for P/N AD-5 / AD-5UL / AD-5MU / AD-5MR / AD-5MLE / AD-5ML / AD-5GL / AD-5EL. For LK Series: LK-43JC LK-44 LK-45....
  • CT Series: CT-210 CT-240 CT-310 CT-360 CT-400 CT-410 CT-420 CT-430 CT-450 CT-460 CT-480 CT-488 CT-491 CT-496 CT-500 CT-510 CT-520 CT-550 CT-588 CT-58S....
  • CTK Series: CTK-496 CTK-50 CTK-500 CTK-501 CTK-510 CTK-511 CTK-515 CTK-518 CTK-519 CTK-520 CTK-520L CTK-530 CTK-531 CTK-533 CTK-550 CTK-551 CTK-555L....
Check Stock

Leviton 1K240-1SW Series 1000 120/240V 100A 1P3W Indoor Kit with 2 Solid Core CTs

  • Certified to all applicable standards of ANSI C12.1.
  • Equipped with both Isolated Pulse Output and RS-485 Serial Port (Modbus Native) standard for easy interface with most AMR and BAS systems.
  • Utilizes revenue grade 0.3 accuracy class 0.1A secondary solid core current transformers (CTs) that conform to all applicable ANSI requirements or 1-Percent accuracy split-core CTs.
  • Up to three sets of CTs per phase can be paralleled per meter.
Check Stock

Leviton 1K240-2SW Series 1000 120/240V 200A 1P3W Indoor Kit with 2 Solid Core CTs

  • Certified to all applicable standards of ANSI C12.1.
  • Equipped with both Isolated Pulse Output and RS-485 Serial Port (Modbus Native) standard for easy interface with most AMR and BAS systems.
  • Utilizes revenue grade 0.3 accuracy class 0.1A secondary solid core current transformers (CTs) that conform to all applicable ANSI requirements or 1-Percent accuracy split-core CTs.
  • Up to three sets of CTs per phase can be paralleled per meter.
Check Stock