Top Soft Grip Feeler Gauge Reviews

Engine Timing Light with Feeler Gauge 32 Blades,Inductive Timing Light Gun Timing Light Ignition Testers Engine Ignition Coil Tester for Car Motor Vehicle Motorcycle Marine Lawnmower Measuring Gap

  • ...ength Cables Easy Connect To Car's Engine Bay★ - Sensor Clips Cable length up to 4.41ft .Never worry about the length of the cable is not long enough.Adapts to all kinds of 12V battery for automobiles, motorcycles, ATVs, personal watercraft, RVs, boats, airplanes, golf carts, lawn mower, etc ..
  • ★ Stainless Steel Feeler Gauge As Bonus★ - Use feeler gauge to measure gap.This is flexible easy to get into all places. Blades are able to be together or can unscrew finger nut to take feeler out. 2 Different units of measuring: Dual marked metric and imperial, 0.0015 in/ 0.04 mm to 0.035 in/ 0.88 mm, the numbers of size are etched into feeler gauge for easy identification.Perfect for setting lifter, sparking plug, points gap etc. With anti-rust oil on feeler gauge to prevent rust..
Check Stock

Spurtar 32 Blades Stainless Steel Feeler Gauge Dual Marked SAE and Metric Valve Thickness Gauges Measurement Tool for Measuring Gap Width or Thickness 0.001-0.04 / 0.03-1.00mm

  • Easy identification- dual marked metric and imperial, 0.001inch to 0.04inch (0.03mm to 1mm), the numbers of size are etched into feeler gauge for easy identification.
  • User Friendly- The edge of the feeler gauge is steel and polished. It's full of bright metal texture specially treated, smooth and doesn't hurt your hand.
  • Foldable- Feeler gauges fold into a plated steel case with a thumbscrew, easy to carry, convenient to take and safe to store.
  • Tapered feeler gauge set is made of high quality flexible 65 manganese steel, hardened and polished for long time and accurate usage.
  • The Feeler Gauge Set is coated with vaseline. With this protection, the feeler gauge doesn't get rusty and easy to open..
Check Stock

ZUZUAN 1 Pack Feeler Gauge with 32-Blade and 1 Pack Offset Feeler Gauge with 16-Blade, Gauge Dual Marked Metric and Imperial Gap Measuring Tool

  • ✔Feeler Gauge Sets: Including 65 manganese steel feeler with 32-blade and offset feeler gauge with 16-blade, made of 65 manganese steel, 65 manganese steel is more resistant to wear&tear and has higher strength than stainless steel, features high precision and hardness, good elasticity and wear resistance..
  • ✔Easy to identify: metric and imperial double marking, laser technology etched out the size of the number, in light at a glance its specifications, easy to identify..
  • ✔Feeler Gauge with 32-Blade Measurement: 0.0015 inch to 0.035 inch(0.04 mm to 0.88 mm), please see the second picture for size details.Offset Feeler Gauge with 16-Blade Measurement: 0.005 inch to 0.020 inch (0.127 mm to 0.508 mm), please see the third picture for size details..
  • ✔Unique Design: The blades are bound within a chromed-blade protector to prevent loss of individual blades, designed with a thumb notch for easy selection and expansion, and it can be moved 360 degrees and disassembled if you want to use one alone..
  • ✔NOTICE:This product is a feeler gauge, used to measure the size of the gap spacing. If you need to measure the thickness of some articles, you can buy the wire diameter gauge of our shop, which has the supporting thickness gauge. Thank you for your cooperati....
Check Stock

Stainless Steel Feeler Gauge Measuring Tool Dual Marked Metric and Imperial Measuring (0.02-1.00 mm,Short 17 Blades)

  • Feeler gauge set: made of 65 manganese steel, each measuring feeler gauge has 17 blades thickness.
  • Foldable feeler gauges, easy and convenient to take and store.
  • Easy identification: dual marked metric and imperial, 0.0008 inch/ 0.02 mm to 0.0394 inch/ 1 mm, the numbers of size are etched into feeler gauge for easy identification.
  • Metric sizes (mm): 0.02, 0.03, 0.04,0.05,0.06, 0.07, 0.08, 0.09, 0.10, 0.15, 0.20, 0.25 0.30, 0.40, 0.50, 0.75, 1.00.
  • Inch sizes: 0.0008-0.0394 inch, various sizes bring convenience when measuring.
  • Warm notice: there is some anti-rust oil on the stainless steel feeler gauge to prevent it from rusty, please don’t worry about that.
Check Stock

23 Blades Steel Feeler Gauge Dual Marked Metric and Imperial Gap Measuring Tool

  • ▲Feeler Gauge Set - Made of 65 Manganese Steel, Each Measuring Feeler Gauge has 23 Blades Thickness.
  • Foldable Feeler Gauges, Easy and Convenient to Take and Store..
  • ▲Easy Identification - Dual Marked Metric and Imperial, 0.0007 inch/ 0.02 mm to 0.0039 inch/ 0.10 mm, the Numbers of Size are Etched into Feeler Gauge for Easy Identification..
  • ▲Metric Sizes (mm) - 0.02, 0.03, 0.04, 0.05, 0.10, 0.15, 0.20, 0.25, 0.30, 0.35, 0.40, 0.45, 0.50, 0.55, 0.60, 0.65, 0.70, 0.75, 0.80, 0.85, 0.90, 0.95, 0.10..
  • ▲Inch Sizes - 0.00078,0.00197,0.00394,0.00591,0.00787,0.00984,0.01181,0.01378,0.01575,0.01772,0.01968,0.02165,0.02362,0.02559,0.02756,0.02953,0.03149,0.03346,0.03543,0.0374,0.03937..
  • ▲Warm Notice - There is Some Anti-rust Oil on the Stainless Steel Feeler Gauge to Prevent it from Rusty, Please don’t Worry About That..
Check Stock

Stainless Steel Feeler Gauge Measuring Tool Dual Marked Metric and Imperial Gap Measuring (0.05-1.00 mm, 20 Blades)

  • Feeler gauge set: made of 65 manganese steel, each measuring feeler gauge has 20 blades thickness.
  • Foldable feeler gauges, easy and convenient to take and store.
  • Easy identification: dual marked metric and imperial, 0.002 inch/ 0.05 mm to 0.04 inch/ 1 mm, the numbers of size are etched into feeler gauge for easy identification.
  • Metric sizes (mm): 0.05 to 1 mm, various sizes bring convenience when measuring.
  • Inch sizes: 0.002, 0.004, 0.006, 0.008, 0.010, 0.012, 0.014, 0.016, 0.018, 0.020, 0.022, 0.024, 0.026, 0.028, 0.030, 0.032, 0.034, 0.036, 0.038, 0.040.
  • Warm notice: there is some anti-rust oil on the stainless steel feeler gauge to prevent it from rusty, please don’t worry about that.
Check Stock

Stainless Steel Feeler Gauge Dual Marked Metric and Imperial Measuring Tool (0.02-1.00 mm, 17 Blades)

  • Feeler gauge set: made of 65 manganese steel, each measuring feeler gauge has 17 blades thickness.
  • Foldable feeler gauges, easy and convenient to take and store.
  • Easy identification: dual marked metric and imperial, 0.0007 inch/ 0.02 mm to 0.039 inch/ 1 mm, the numbers of size are etched into feeler gauge for easy identification.
  • Metric sizes (mm): 0.02, 0.03, 0.04, 0.05, 0.06, 0.07, 0.08, 0.09, 0.10, 0.15, 0.20, 0.25, 0.30, 0.40, 0.50, 0.75, 1.00.
  • Inch sizes: 0.0007, 0.001, 0.0016, 0.002, 0.0024, 0.0028, 0.0031, 0.0035, 0.0039, 0.006, 0.008, 0.009, 0.011, 0.015, 0.019, 0.029, 0.039.
  • Warm notice: there is some anti-rust oil on the stainless steel feeler gauge to prevent it from rusty, please don’t worry about that.
Check Stock

KEWAYO Stainless Steel Feeler Gauge Metric Measuring Tool (0.02-1.00mm, 17 Blades), for Measuring Gap Thickness

  • Easy identification: dual marked metric and imperial, 0.0007 inch/ 0.02 mm to 0.039 inch/ 1 mm, the numbers of size are etched into feeler gauge for easy identification.
  • Metric sizes (mm): 0.02, 0.03, 0.04, 0.05, 0.06, 0.07, 0.08, 0.09, 0.10, 0.15, 0.20, 0.25, 0.30, 0.40, 0.50, 0.75, 1.00.
  • Inch sizes: 0.0007, 0.001, 0.0016, 0.002, 0.0024, 0.0028, 0.0031, 0.0035, 0.0039, 0.006, 0.008, 0.009, 0.011, 0.015, 0.019, 0.029, 0.039.
  • Feeler gauge set: each measuring feeler gauge has 17 blades thickness.
  • Foldable feeler gauges, easy and convenient to take and store.
  • Warm notice: There is some anti-rust oil on the stainless steel feeler gauge to prevent it from rusty, please don’t worry about it..
Check Stock

4 Pieces Stainless Steel Feeler Gauges Dual Marked Metric Feeler Gauge SAE Offset Valve Thickness Gauge 32-Blade Feeler Gauge Measuring Spark Plug Tool for Measuring Width Thickness

  • Feeler fauge sets: package contains 4 pieces of 32-pieces feeler gauge (measurement: 0.0015-0.035 inch/ 0.04-0.88 mm), adequate size to meet your use and replacement needs.
  • Suitable for designers, engineers, mechanics to measure the thickness of tappet clearances, spark plugs gaps and other hard to reach places.
  • Quality material: made of 65 manganese steel, each spark plug gap measuring tool is resistant to wear and tear and has nice strength, exquisite and durable, features nice precision and hardness, elasticity and wear resistance, lightweight and small size, easy to carry and storage.
  • Easy to identify: dual marked metric and SAE, through the fine manufacturing process, the number of sizes in the feeler gauge and its specifications are clear at a glance and easy to identify.
  • Warm tip: stainless steel feeler gauge has some anti-rust oil to prevent rust, please do not worry.
  • Foldable design: fastened by screws, removable, the plates are bound inside a chromed plate protector to prevent loss of individual plates, designed with a thumb notch for easy selection and expansion, when you use it, you can move the plate out, and when not in use, you can fold it back to prevent corrosion, bending, deformation and damage, simple and convenient.
Check Stock

2 Pack Feeler Gauge with 32/26 Blades and 1 Pack Offset Feeler Gauge with 16 Blades - Stainless Steel Feeler Gauge Dual Marked Metric and Imperial Gap Measuring Tool for Automotive Repair

  • Good Combination: The package includes 3pcs feeler gauges with different sizes, types and blades (32/26/16 Blades), this set includes the common sizes needed for jobs, you can choose the appropriate one that meets your needs.
  • Various Sizes: Metric and inch sizes etched on each blade. Feeler Gauge with 32 Blades (0.04 mm - 0.88 mm/0.0015 inch to 0.035 inch). Feeler Gauge with 26 Blades (0.04 mm - 0.63 mm/0.0015 inch to 0.025 inch). Offset Feeler Gauge with 16 Blades (0.127 mm - 0.508 mm/0.005 inch to 0.020 inch). Please refer to the pictures for size details.
  • User Friendly: Designed with the thumb notch, the chromed-blade protector and the lock nut, the feeler gauge set is foldable, convenient to take and store, and these blades are not easy to be lost and can be disassembled if you want to use one alone.
  • Multi-functional: Ideal for exactly measuring gap width or thickness. Suitable for designers, engineers and mechanics to measure the thickness of bearing clearances, spark plugs gaps, piston ring gaps and other places that are hard to reach.
  • Durable: Made of high quality 65 manganese steel, the feeler gauges are resistant to wear and have strong strength, and there is some oil on the feeler gauge set to prevent it from rusty.
Check Stock

32 Blades Steel Feeler Gauge Dual Marked Metric and Imperial Measuring Tool

  • Feeler gauge set: made of 65 manganese steel, each measuring feeler gauge has 32 blades thickness.
  • Foldable feeler gauges, easy and convenient to take and store.
  • Easy identification: dual marked metric and imperial, 0.0015 inch/ 0.04 mm to 0.035 inch/ 0.88 mm, the numbers of size are etched into feeler gauge for easy identification.
  • Metric sizes (mm): 0.04, 0.05, 0.06, 0.08, 0.10, 0.13, 0.15, 0.18, 0.20, 0.23, 0.25, 0.25, 0.28, 0.30, 0.33, 0.35, 0.38, 0.40, 0.43, 0.45, 0.48, 0.50, 0.53, 0.55, 0.58, 0.60, 0.63, 0.65, 0.70, 0.75, 0.80, 0.88.
  • Inch sizes: 0.0015, 0.002, 0.0025, 0.003, 0.004, 0.005, 0.006, 0.007, 0.008, 0.009, 0.010, 0.010, 0.011, 0.012, 0.013, 0.014, 0.015, 0.016, 0.017, 0.018, 0.019, 0.020, 0.021, 0.022, 0.023, 0.024, 0.025, 0.026, 0.028, 0.030, 0.032, 0.035.
  • Warm notice: there is some anti-rust oil on the stainless steel feeler gauge to prevent it from rusty, please don’t worry about that.
Check Stock

Stainless Steel Feeler Gauge Measuring Tool Dual Marked Metric and Imperial Measuring (0.038-1.02 mm,25 Blades)

  • Feeler gauge set: made of 65 manganese steel, each measuring feeler gauge has 25 blades thickness.
  • Foldable feeler gauges, easy and convenient to take and store.
  • Easy identification: dual marked metric and imperial, 0.0015 inch/ 0.038 mm to 0.04 inch/ 1 mm, the numbers of size are etched into feeler gauge for easy identification.
  • Metric sizes (mm): 0.038, 0.127, 0.152, 0.178, 0.203, 0.229, 0.254, 0.279, 0.305, 0.330, 0.356, 0.381, 0.406, 0.432, 0.457, 0.483, 0.508, 0.533, 0.635, 0.686, 0.762, 1.
  • Inch sizes: 0.0015, 0.002, 0.003, 0.004, 0.005, 0.006, 0.007, 0.008, 0.009, 0.010, 0.011, 0.012, 0.013, 0.014, 0.015, 0.016, 0.017, 0.018, 0.019, 0.020,0. 021, 0.025, 0.027, 0.030, 0.040.
  • Warm notice: there is some anti-rust oil on the stainless steel feeler gauge to prevent it from rusty, please don’t worry about that.
Check Stock

Stainless Steel Feeler Gauge Dual Marked Metric and Imperial Measuring Tool (0.005/0.127-0.02/0.508 mm, 16 Blades)

  • Feeler gauge set: made of 65 manganese steel, each measuring feeler gauge has 16 blades thickness.
  • Foldable feeler gauges, easy and convenient to take and store.
  • Easy identification: dual marked metric and imperial, 0.005/ 0.127 -0.02/ 0.508 mm, the numbers of size are etched into feeler gauge for easy identification, Warm notice: Please check the product specification and size before purchase..
  • Metric sizes (mm): 0.127 mm, 0.152 mm, 0.178 mm, 0.203 mm, 0.229 mm, 0.254 mm, 0.279 mm, 0.305 mm, 0.330 mm, 0.356 mm, 0.381 mm, 0.406 mm, 0.432 mm, 0.457 mm, 0.483 mm, 0.508 mm.
  • Inch sizes: 0.005, 0.006, 0.007, 0.008, 0.009, 0.010, 0.011, 0.012, 0.013, 0.014, 0.015, 0.016, 0.017, 0.018, 0.019, 0.020 inches.
  • Warm notice: there is some anti-rust oil on the stainless steel feeler gauge to prevent it from rusty, please don't worry about that.
Check Stock