Top Socket Ends Reviews

Muteki 32906B SR Series Black 12mm x 1.5mm SR48 Open End Lug Nut Set, (Set of 20)

Extended 48 millimeter length open ended design with knurled ends.
can be removed with a 17 millimeter socket.
Each SR48 lug weighs just under 2 ounces.
Extended 48mm length open ended design with knurled ends.
SR48 lugs weigh just under 2 ounces. Compact size to fit small diameter wheel holes.

Check Stock

Tanning Bed Struts Spring Shock Sunquest Pro 14 / 16SE

Extended Length: 22" (center to center of ball socket ends).
Force: 119 pounds of pressure (Per Prop).
End Fitting: 10mm Ball Socket and 10mm Ball Socket.

Check Stock

Best Naturals L-Tryptophan 500mg 120 Capsules - tryptophan Supplements for Natural Way to get Good Night Sleep

TRIPLE SQUARE SPLINE SOCKET SET: Our triple square spline tool set is a must-have for tightening and loosening high-torque triple square screws and....
WORKS WITH MANY VEHICLES: These triple square drive sockets are designed to operate on European automotive vehicles.
CONVENIENT FEATURES: This socket set comes with high-strength chrome vanadium steel sockets to increase turning power.
HEAVY DUTY SOCKET TOOL SET: Our socket set features heat-treated alloy steel bits to reduce premature wear.
Triple square socket kit bits have a fully....
CONVENIENT STORAGE: The triple square spline drive socket set comes in an enclosed storage case for easy identification, portability, and storage.

Check Stock

ITEQ 5 Pcs Automotive Oxygen Sensor Socket Wrench Remover Tool and Thread Chaser Set

Perfect tool set for removing, inspecting, replacing and installing heated and non heated oxygen sensors and vacuum switches on most vehicles with computer-controlled engines.
3 types of universal socket wrenchs cover various situations of oxygen sensor location.
6-point 7/8” (22mm) socket opening fits all hexagon oxygen sensor, common 3/8” and 1/2” drive ends can be used with ratchet or breaker bar.
Special side cutout design allows easy access to oxygen sensors from any section and prevents damage to wires.
Set Including: 1-pc 3/8” Dr. extra deep broach socket (3-1/8” long), 1-pc 3/8” Dr. low-profile crowfoot socket wrench (1-1/4” long), 1-pc 1/2” Dr. offset crowfoot socket wrench (1-15/16” long), 1-pc M18 x 1.5mm and 1-pc M12 x 1.25mm thread chasers with 3/8” drive to clean and repair damaged threads.

Check Stock

Oxygen Sensor Socket Wrench Remover Tool and Thread Chaser Set-5 Pcs, 02 Oxygen Sensor Socket Offset Wrench Remover Tool,A7841F-FBA +Thread Chaser,by Lucky Seven

Oxygen Sensor Socket Wrench Including: 1-pc 3/8” Dr. extra deep broach socket (3-1/8” long), 1-pc 3/8” Dr. low-profile crowfoot socket wrench (1-1/4” long), 1-pc 1/2” Dr. offset crowfoot socket wrench (1-15/16” long), 1-pc M18 x 1.5mm and 1-pc M12 x 1.25mm thread chasers with 3/8” drive to clean and repair damaged threads.
Oxygen Sensor Socket Wrench Set Special side cutout design allows easy access to oxygen sensors from any section and prevents damage to wires，Perfect tool set for removing, inspecting, replacing and installing heated and non heated oxygen sensors and vacuum switches on most vehicles with computer-controlled engines..
5 Pcs Oxygen Sensor Switch Socket Wrench Kit and Thread Chaser Set-3 types of universal socket wrenchs cover various situations of oxygen sensor location,6-point 7/8” (22mm) socket opening fits all hexagon oxygen sensor, common 3/8” and 1/2” drive ends can be used with ratchet or breaker bar..
Oxygen Sensor Socket Wrench kit-Including 3 oxygen sensor sockets and 2 thread chasers for cleaning and repairing damaged threads,oem oxygen sensor wrench socket,oxygen sensor wrench socket,o2 oxygen sensor socket wrench,o2 sensor socket wrench,oxygen sensor wrench set,oxygen sensor wrench tool,oxygen sensor wr....

Check Stock

A PAIR(2) Tanning Bed Gas Spring Strut Rod Shock Lift Prop Arm Tube 22' extended length x 12.5 ' compressed length x 119 LB Pressure

Extended Length: 20" (center to center of ball socket ends).
End Fitting: 10mm Ball Socket and 10mm Ball Socket.

Check Stock

5PCS Oxygen O2 Sensor Socket Wrench 22mm Removal Tool Thread Chaser Set

【WHAT YOU GET】 1PC 1/2'' Drive x 27mm oil pressure sending unit socket. 1PC 1/2'' Drive x 29mm pressure/vacuum switch socket with slot. 1PC 1/2'' Drive x 7/8'' long sensor wrench socket with slot. 1PC 3/8'' Drive x 7/8'' vacuum switch socket with slot. 1PC 3/8'' Drive x7/8'' (6 point) vacuum switch socket with slot. 1PC 3/8'' Drive x 1-1/16'' & 1'' (6 point) oil pressure sending unit socket. 1PC 3/8'' DR x 7/8'' (6 point) short sensor wrench socket with slot..
【FUNCTION】 Designed for the removal and installation of sensors, oil pressure sending units and vacuum switches equipped with wires or vacuum tubes on most vehicles. Provide additional leverage even in hard-to-reach places. We offers premium after-sales service and technical support to each customer..
【FEATURES】 Constructed of high performance chrome vanadium for strength and durability. Finished with Black Oxide to avoid rust. Side cutout design allows easy access to from section and avoids from damage to wire..
【PLUG AND PLAY】 Universal 6-point 7/8” (22mm) socket opening fits all hexagon sensor, common 3/8” and 1/2” drive ends can be used with ratchet or breaker bar..
【1 YEAR WARRANTY】 We provide 1 year warranty, support replace, return and refund service. We will random....

Check Stock

HYAT 5pcs Automotive Oxygen Sensor Socket Wrench Remover Tool and Thread Chaser Set

Ideal for removing and installing oxygen sensors and vacuum switches on vehicles with computer-controlled engines.
3 Different types of sockets cover various situations of oxygen sensor locations.
Universal 6-point 7/8” (22mm) socket opening fits all hexagon oxygen sensor, common 3/8” and 1/2” drive ends can be used with ratchet or breaker bar.
Special side cutout design allows easy access to oxygen sensor from any section and prevents damage to wires.
Set includes: 1-pc 3/8” Dr. extra deep broach socket (3-1/8” long), 1-pc 3/8” Dr. low-profile crowfoot socket wrench (1-1/4” long), 1-pc 1/2” Dr. offset crowfoot socket wrench (1-15/16” long), 1-pc M18 x 1.5mm and 1-pc M12 x 1.25mm thread chasers with 3/8” drive to clean and repair damaged threads.

Check Stock

OEMTOOLS 22711 10 Piece Triple Square Bit Socket Set, 1/2', 1/4', and 3/8' Spline Socket Set for Triple Square Screws and Bolts

TRIPLE SQUARE SPLINE SOCKET SET: Our triple square spline tool set is a must-have for tightening and loosening high-torque triple square screws and bolts.
Triple square bit set is constructed with superior materials for increased torque and hardness.
WORKS WITH MANY VEHICLES: These triple square drive sockets are designed to operate on European automotive vehicles.
12 point triple square bit set is for use with BMW, Mercedes, VW, Audi, Porsche, and most other European vehicles.
CONVENIENT FEATURES: This socket set comes with high-strength chrome vanadium steel sockets to increase turning power.
Triple square drive bit ends insert smoothly into fasteners while protecting bits and fasteners from damaged edges.
HEAVY DUTY SOCKET TOOL SET: Our socket set features heat-treated alloy steel bits to reduce premature wear.
Triple square socket kit bits have a fully refined hard chrome plated finish and zinc phosphate treatment to prevent corrosion.
CONVENIENT STORAGE: The triple square spline drive socket set comes in an enclosed storage case for easy identification, portability, and storage.
European socket set has 1/4", 3/8", and 1/2" drive sizes.

Check Stock

Neiko 03969A Socket Holder Rail, 3 Piece Organizer Set | 1/4, 3/8 and 1/2-Inch Drive

Nickel plated steel clips and rails are made durable to withstand long-term holding use versus plastic holders.
Socket holders are lightweight so you can transport sockets with ease.
Hole for loops are located on both ends of each socket holder and in the middle so you can easily hang on the garage and workshop walls.
Curved clip design securely holds sockets with enough tension without making removing too difficult.
Each socket rail has 16 drive clips for the following drive sizes: 1/4, 3/8 and 1/2-inch drives.

Check Stock

Hotop 20 Sets Skate Wheel Socket Screw Inline Roller Skate Screws Shaft Hex Socket Screw with 2 Pieces Installation Tool

Enough quantity: you will receive 20 sets of skate wheel socket screws with 2 pieces installation tools, enough amounts to meet your long-term using needs.
Precision size: the width of the socket screw hex measures approx. 5/32 inch/ 4 mm, and the shaft diameter is about 15/64 inch/ 6 mm, the overall size measures approx. 37 x 13 mm/ 1.5 x 0.5 inches, please confirm the size before buying.
Quality material: these skate wheel socket screws are made of quality metal, which possess good performance, sturdy and reliable to improve the service life and durability of bearings.
Simple installation: you can easily fix the two ends of the skate wheel socket screw with the installation tool we provide, and then install your on the skates, easy and convenient to use.
Easy to carry: these inline roller skate wheel socket screws are small in size, they are packed in a box, easy and portable for you to carry and store.

Check Stock

NordWolf 9-Piece Metric Extra Long Arm Ball End Stubby Allen Wrench Set, Industrial Grade Hex L-Keys Made From S2 Steel, Sizes 1.5mm to 10mm

【High Quality】Industrial grade, made from S2 steel for higher hardness and torque for use around automotive workshops, working sites, garages and home repairs.
【Convenient Usage】Ball end, stubby hex ends is about 25% shorter than standard hex keys, for use in tight places.
【Efficient Design】Extra long arm provides higher torque and extra reach. Working at up to 25° entry angle for access to hard-to-reach socket head fasteners.
【Long-Lasting Use】Fine chamfered hex ends provide precise fit into socket head fasteners, reduce rounding or cam-out.
【Popular Sizes】Includes metric sizes: 1.5mm, 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, 8mm, 10mm.

Check Stock

I Never Sleep / Here We Come / Allen's Wrench ( 7" Single

PREMIUM - 32-Piece Allen socket set, Features a wide range of SAE & Metric Hex Bit Sockets. Crafted and Designed with superior materials for increased torque and unmatched hardness..
DURABLE - Drop-forged, Heat-treated S2 alloy steel bits, Reduce wear-outs. Hardened treated Chrome Vanadium steel hex bit socket, Increase turning power..
LONGEVITY - Complete rust and corrosion resistance with fully polished, Chrome plated mirror finish sockets and Zinc Phosphate bits treatment..
COMFORTABLE - This must-have allen wrench socket set are easy to Insert smoothly with precision chamfered bit ends. Sizes are stamped on sockets and on heavy duty storage case for faster recognition..
100% RISK-FREE – Meet & Exceeds ANSI (The American National Standard Institute) and backed by our Lifetime Limited Warranty for your complete peace of mind..

Check Stock