Top Welding Stub Ends Reviews

21 Rods Aluminum Brazing Rod Low Temperature, Aluminum Welding Rods for Propane Torch, Flux Core Welding Wire for Alu, Alu Alloy, Aluminum Repair, 1/16\ X 16.93\ (1.6 mm)

MATERIAL: 21 Rods 1/16" x 16.93" aluminum brazing rods are included in the package. The chemical composition of the brazing rods: Si 12%, Mg≤0.10%, Fe≤0.80%, Cu≤0.03%, Zn≤0.20%, Mn≤0.15%, AL balance. Welding flux core 18%..
ADVANTAGES: Brazing temperature range: 716-752°F. Solidus: 716°F, Liquidus: 752°F. Tensile Strength ( RM): 130N/mm². The aluminum soldering rods has good fluidity during welding, strong caulking, and can flow into small spaces..
PACKAGING: Cloud Fire welding rod packaging has been optimized, and it is packaged in a sealed tube, which can effectively reduce the occurrence of moisture and other events compared with other packaging. The caps at both ends can be opened for easy storage and use..
APPLICATION: Aluminum welding rods for propane torch is suitable for leak welding of aluminum ship bottom, fuel tank, condenser.
crack repair of aluminum alloy engine block, base, gearbox, aluminum parts. Notice: It is not suitable for cast iron welding..
SERVICE: When you have a problem in the process of using the welding rod, please do not hesitate to contact us immediately, we will solve all problems for you. And we look forward to getting your suggestions on the welding rod, we will continue to improve the products and serve you ....

Check Stock

ABN Oxygen Acetylene Hose 1/4 Inch B Fittings Twin Welding Hose Oxy Acetylene Torch Hose Cutting Torch Hoses, 25 Foot

GET THE JOB DONE: The ABN 25 Foot Acetylene / Oxygen Torch Hose Twin Pack is designed to transport oxygen and acetylene gases to your welding torch or cutting equipment for your metalworking projects.
Twin oxygen and acetylene torch hoses are flame retardant and suitable for indoor and outdoor use in your home, mechanics shop, or on any job site.
PERFECT SIZE FOR YOUR NEEDS: 25 foot torch hose length (7.6m) allows you to safely keep the tanks away from the torch tip while servicing your vehicle.
Oxy Acetylene torch kit gas hose features a 1/4-inch (6mm) inner diameter (ID) and 1/2-inch (13mm) outer diameter (OD) and has a maximum pressure of 300 PSI (20.7 Bar) to supply optimal flow rate.
FITS YOUR WELDING TORCH AND REGULATOR: Twin welding torch hose includes standard B fittings on both ends (4 threaded fittings total) to connect to your existing regulator or cutting torch kit.
Make sure that your regulator and oxy acetylene cutting torch handle are "B" size (9/16 inch - 18) air hose fittings to ensure exact fitment.
KEEP LINES DISTINGUISHABLE: Red and green twin hoses provide a color-coding system to hook up to your regulator and oxy torch kit safely.
One rubber hose includes right-handed fitting threads, and the other welder hose includes left-handed ....

Check Stock

10 Rods Copper Brazing Rod 15.7 Low Temperature Welding Rod Welding Consumables with Good Liquidity for Welding Refrigerator Air Conditioner Copper Pipes Copper Products

MATERIAL: 10 Rods copper brazing rods 15.7” are included in the package. The chemical composition of the brazing rods: Phosphor (P): 7%, Copper (Cu): the remainder..
ADVANTAGES: Brazing temperature range: 1310°F-1490°F. Solidus: 1310°F, Liquidus: 1490°F. Tensile Strength ( RM): 838 MPa. The PhosCopper brazing rods has good fluidity during welding, strong caulking, and can flow into small spaces..
PACKAGING: Cloud Fire welding rod packaging has been optimized, and it is packaged in a sealed tube, which can effectively reduce the occurrence of moisture and other events compared with other packaging. The caps at both ends can also be opened for easy storage and use..
APPLICATION: High-quality copper brazing rod are used for the welding of refrigerator copper pipes, air conditioner copper pipes and copper water pipe, as well as for the electromechanical industry..
SERVICE: When you have a problem in the process of using the welding rod, please do not hesitate to contact us immediately, we will solve all problems for you. And we look forward to getting your suggestions on the welding rod, we will continue to improve the products and serve you better..

Check Stock

DANCO Decorative Bathtub Faucet Spout with Pull Up Diverter | 6 Inch Length | Chrome Finish (10315)

MODERN DESIGN - The Danco tub spout is ideal for replacing and updating your worn-out, non-functioning tub spout and the decorative design will give a fresh update to your bathtub..
CONNECTION SIZE: Designed to fit 1/2 in. Copper Pipe Slip Connection, 1/2 in. Male Threaded Connection with Short Stub out connection, 1/2 in. Male Threaded Connection with Long Stub out Nipple and 3/4 in. Male Threaded Connection with Short Stub Out Nipple..
ADAPTERS INCLUDED: This Tub spout DIY installation kit comes with an extension nipple and adapter to ensure a snug fit onto your existing stub out nipple pipe to replace your existing tub spout..
DIVERTER INCLUDED: This tub spout includes a diverter lift rod to allow water stream to flow though downward into the tub or upward into showerhead..
TUB SPOUT REACH: The bathtub faucet spout has a 5 1/2 in. reach..
BUILT TO LAST: The durable metal construction provides strength, longevity and will endure the rigors of everyday use.
HASSLE-FREE INSTALLATION: You will need Phillips screwdriver, sandpaper, silicon grease and pipe thread tape to install and to help prevent leaks and provide a better seal during installation..
CHROME FINISH resists corrosion and tarnishing and will complement your existing bathroom fixtures..

Check Stock

Coleman Cable 19228806 8/3 Heavy-Duty STW 50-Amp/250-Volt Nema 6-50 Blue Welder Extension Cord, 50-Feet

HEAVY-DUTY 50' Extension Cord suitable for welding machines with a NEMA 6-50 configuration.
8-Gauge STW jacket for SUPERIOR PERFORMANCE and FLEXIBILITY.
LIGHTED RECEPTACLE END indicates when power is on.
MOLDED ENDS offer safety and convenience on the jobsite.
Offers more PORTABILITY to welding machinesExtension Cord rated at 50 Amps.

Check Stock

Thorn Folding Boat Cleat,Flip Up 4-1/2" Dock Cleat 316 Marine Grade Stainless Steel with Back Plate Pack of 2

HIGH QUALITY MATERIALS .Boat surface mount dock edge flip up cleat folding cleats made of 316 stainless steel casting, durable and high strength.Maximum corrosion resistance and durability in the saltwater environment.
WELL DESIGNED.These folding cleats simply fold-down when not in use.The fold away feature is a great design, No one will stub a foot or toe, nice smooth surface when not in use.At the same time ,smooth edge avoids cutting of rope or foot injury..
QUICK AND EASY TO INSTALL.Drill holes needed and slide the supplied stainless steel screws through the hull.Even no drilling or welding required. direct replacement for the old or broken one..
WIDE APPLICATION.Fashionable looking to match marine .Stainless steel dock cleat uses watercraft/boat/yacht,boat docks, decks, piers for tying up boats, kayaks..
PACKING WITH ACCESSORIES.We offer two types of screws for your choice(Bolts and screws ).You can install it as needed.And also packing include back plate to make Folding cleat more stable..

Check Stock

Industrial Argon Regulator/Flowmeter Gauges for MIG and TIG Welders + 5 Feet Hose - SÜA

Argon Regulator for Shield Gas in TIG and MIG Welding.
Gas Service: Argon, Argon/CO2 Mixtures, Helium - Inlet Connection: CGA-580.
Three Outlet Connection Options: 9/16" Male, 5/8" Female and Hose Barb.
Inlet Gauge: 0-400 psi - Dual Scale Outlet Gauge: Argon 0-30 CFH and CO2 0-20 CFH.
Includes 5 Feet Argon Hose with 5/8"-18 Male Fittings in Both Ends. Fits flowmeter and all major welder brands. Designed for MIG and TIG welding.

Check Stock

WARN 22680 Quick Connect Winch Power Cable Connector Plugs, 1 Pair

... TERMINAL}: The thicker copper-plated silver of the battery quick connect disconnect set greatly enhances the electrical conductivity, which helps prevent ignition when large current passes, and ensures stable current transmission.
the copper terminal of battery quick disconnect kit is convenient for cold pressing, welding, and faster and firmer wiring.
{SPECIFICATIONS AND PACKAGING of the BATTERY QUICK CONNECTOR SET } Voltage: 12-36 volts DC.
the package contains 6 groups of 6 to 10 battery quick connectors, including 6 connectors, 12 terminal pins, 6 caps, the quantity is enough to meet your different Demand or replacement.
{EASY TO INSTALL}: You can quickly install the plugs of these battery quick disconnect connectors, insert the wires into the terminal pins, and then perform welding or crimping. The ends of the connectors are the same, so both ends are suitable for connecting to the power or load side.
{WIDE APPLICATION of the QUICK CONNECT PLUG PACK}: Provide a simple and convenient way to connect/disconnect power to winches or other electrical equipment, such as remote battery chargers, power inverters, solar devices, forklifts, electric bicycles, electric sightseeing vehicles, etc..

Check Stock

YG-1 E5023 Carbide Square Nose End Mill, Double End, TIALN Multilayer Finish, 30 Deg Helix, 4 Flutes, 2\ Overall Length, 0.140625\ Cutting Diameter, 0.1875\ Shank Diameter

Double-end square end mills create sharp, unrounded cuts and have cutting edges on both ends for longer tool life.
Suitable for general-purpose machining on steel, chromium-nickel steel, and malleable cast iron.
Stub length increases the strength of the tool, making it less likely to break in the workpiece.
Four flutes produce a better finish than fewer flutes.
Titanium aluminum nitride (TiAlN) coating lubricates the end mill for high-temperature stability and abrasion resistance at high cutting speeds, offering better heat resistance than uncoated finish, TiN coating, and TiCN coating.

Check Stock

RealiNice Rim Strip (26'' x 18mm 2 Pcs)

【DURABLE】 Made of non-adhesive, light weight PVC material, which is innocuous and durable, protects inner tubes from spoke ends..
【IMPROVED DESIGN】 Strip ends are connected by hot welding process prevents bursting at the seam..
【EASY STEPS TO INSTALL】Simply stretch the strip over the rim and stay in place. It is reusable when wheel repairs or spoke replacement..
【AVAILABLE SIZE】26” x18mm strip is designed for mountain bike clincher wheel, 700C x18mm strip is designed for 700C road bike clincher wheel. Valve opening fits both Presta and Schrader valves..
【FREE Presta Valve Adapter 】Let you use your Schrader valve pump (Gas station pump) with your Presta valve inner tubes..

Check Stock

Downloader

Check paper refills compatible with all VersaCheck software products.
Secure protection with micro-print lines, security screens, and artificial watermarks, and more..
Blank check paper for Laser and Inkjet printers.
Top Stub: 3 1/5 X 8 1/2", Check Size: 3 1/2 X 8 1/2", Bottom Stub: 4 X 8 1/2".

Check Stock

Adowyee Gaming Mouse Pad Blue Stock Exchange Trading Bulls Bears 9.5

Check paper refills compatible with all VersaCheck software products.
Secure protection with micro-print lines, security screens, and artificial watermarks, and more..
Blank check paper for Laser and Inkjet printers.
Top Stub: 3 1/5 X 8 1/2", Check Size: 3 1/2 X 8 1/2", Bottom Stub: 4 X 8 1/2".

Check Stock

(4 Rolls of 2000 Tickets) 8,000 Total Blank Raffle Tickets (4 Assorted Colors)

4 Full rolls of 2, 000 Single Stub Raffle Tickets.
Good for raffles, 50/50 drawings and door prizes..
Each ticket measures 2 inches long and 1 inch wide..
Each roll contains 2, 000 single stub raffle tickets. All tickets are consecutively numbered and are perforated for easy separation.
You will receive 4 different assorted colors from among the eight colors shown.

Check Stock