Top Side Cutter Chamfering Machine Reviews

PORTER-CABLE Hand Planer, 6-Amp, 5/64-Inch (PC60THP)

Heavy-duty 6 amp motor of the electric hand planner provides smooth cutting in hard materials.
The hand planer has 16,500 rpm for smooth material removal.
Dual side dust extraction allows for extraction on either side of the tool.
Overmold depth knob with 10 positive steps allows for better planer control and multiple depth control settings.
3 chamfering grooves allow for options for edge chamfering.
11.5-inch cast aluminum shoe provides added control and better finish quality.
5/64-inch depth of cut removes excess material in less time.
Overmold depth knob with 10 positive steps.

Check Stock

KOPO KP-5702 Manual Chamfering Machine Mini Portable Linear Pneumatic Tool Hand-Held 45 Degree Light Weight Elbow

This 45-degree chamfering machine has a new lightweight design, small and exquisite, and can be easily operated with one hand. Use the matching wrench to easily adjust the chamfer size and replace the blade..
Pneumatic chamfering machine is made of high-quality imported accessories, chamfering Machine keeps accuracy assembly with stable performance for long life..
It can withstand high impact and high speed, with little vibration, low resistance and lower loss. The speed is increased and the chamfer is smoother, and the machine is more durable..
Equipped with a 360-degree rotating exhaust port, which can quickly exhaust and reduce the temperature of the machine..
Pneumatic chamfering machine is entitled with high performance according to strict rule, such a power tool is made via accuracy craft by many experts..

Check Stock

Mini Air-Powered Chamfering Machine Polisher 1/4 -Inch Hand-Held Beveling Machine 45° Arc Deburring Cutter (Chamfering Machine)

【High quality】 Due to high‑quality imported accessories, pneumatic chamfering machine keeps accurancy assembly with stable performance and long life..
【Adjustable】 The speed can reach 30000rpm, and the depth is c0.1-c0.9. Five gears can be freely adjusted to the appropriate intake speed for use,which can improve the blade life, and is easy to operate and use.The chamfer size can be adjusted. Unscrew the screw, rotate to select the scale size, and then tighten the screw..
【Cutter head】 adopts triangular sharp tungsten steel double cutter head, auxiliary bearing shaft, super strength, sturdiness and durability..
【Easy to use】 The body is small and exquisite, Easy operation with one hand. Can cut right angles, fillets, and polish quickly..
【How to Replace Dlade】 Use a hexagon wrench to loosen the plum screw,remove the baffle plate, remove the blade screw with a ring wrench,remove the old blade,and replace it with a new one..

Check Stock

Buddhas Eyes (Essential Bar and Lounge Version)

Heavy-duty 6 amp motor of the electric hand planner provides smooth cutting in hard materials.
The hand planer has 16,500 rpm for smooth material removal.
Dual side dust extraction allows for extraction on either side of the tool.
Overmold depth knob with 10 positive steps allows for better planer control and multiple depth control settings.
3 chamfering grooves allow for options for edge chamfering.
11.5-inch cast aluminum shoe provides added control and better finish quality.
5/64-inch depth of cut removes excess material in less time.
Overmold depth knob with 10 positive steps.

Check Stock

ATOLS Mini Pneumatic Chamfering Machine Portable Handheld 45 Degree Arc Air Beveling Machine with 1/4 Inch Intake Connection for Metal Trimming and Deburring

【HIGH QUALITY】Double head design, depth adjustable. Using sharp tungsten steel double cutter head, strong cutting force, sturdiness and....
【RELIABLE DESIGN】1/4'' air inlet with metal filter to prevent foreign matter from entering..
【HIGHER CUTTING EFFICIENCY】Using the thinnest outer 1mm hexagon nut lock bearing, it can be chamfered in the narrowest and shallowest space,....
【SAFETY & STABILITY】The chamfering machine maintains accurate assembly and is equipped with a 360-degree rotating exhaust port, which can quickly....
【EASY TO OPERATE】Mini body design, light and convenient, one-handed operation, fast cutting right and round corners, effectively improving work....

Check Stock

T Slot Cutter End Mill, Tungsten Steel 4 Flutes Milling Cutter End Mill for Cutting Aluminum Alloy Wood, D6xH2xL50xφ6 T Type Slot Cutter

Good Durability Anti-stick Material: This T Slot Cutter End Mill is made of high quality tungsten steel material, wear resistant and not easy to stick cutter.
Offers Glossy and Precise Cutting: Chamfering at the bottom, high smoothness and high overall precision.
High Efficiency Performance: Fast processing speed, high finish, strong continuous processing is not easy to break.
Three-edge Design Provides Faster Working: Precise edges at the front corners, three-edge geometry for faster cutting.
HRC55: Suitable for objects with hardness lower than HRC55.

Check Stock

SANIK Ratchet Cable Cutter with Telescoping Handles, Heavy Duty Hand Tool J75 Wire Cutters Up To Cu-Al Armored Cable 3 x 120mm2 And 3600 Pairs of Communication Cable

Durable Quality: Made of alloy steel, with stainless steel locknut. Labor-saving telescoping handles. Precise CNC teeth and Seiko milling machine chamfering curvature makes it easy to operate.
Cutting Range: Ratchet cutter cuts up to 3600-pairs of telecommunication cable or copper-aluminum armored cables below 3 x 120mm2 or dia. below 75mm. Hardened forged steel blades ensure consistent cuts and long-term durability..
Sharp Edge: Surface plating of blades for rust and wear resistance. Spring steel material 60SI2MN provides good mechanical properties including blade hardness and durability, able to withstand prolong and intense use..
Retractable Handle: Handles Extend for added leverage and are MVQ insulated preventing hand fatique during prolonged use. QPQ treatment creates a seamless steel tube handle with 40-50HRC hardness making te handles durable and strong..
Many Uses: The light weight ratchet cutter with retractable handles is labor-saving, easy-to-carry and operate. Ideal tool for electrical engineering and construction..

Check Stock

Yonntech 800W Powerful Electric Wood Hand Planer 3-1/4-Inch Planer Woodworking Surface Hand Held Accurate Smooth Door Planer Machine for Carpenter 110V

This powerful electric wood planer suitable fir planing, chamfering and rabbeting various kinds of wood. It can be widely used in carpenter's workshop, outdoor construction sites as well as in carriage, shipbuilding and bridge constructing industries etc..
The productivity of this planer is very high. It is more than 10 times higher compared with a manual planer. After planed with this tool, the surface of the workpieces will be very clean and smooth..
The electric wood planer with cutter depth adjustment button, depth can be adjusted according to the demand.straight processing is stable,ensuring cutting is exact..
High temperature resistant copper wire design of the motor, low heat, large power, not easy to age, with long service life..
The planer machine be equipped with a contoured top handle and convenient trigger switch, easy to operate and use..

Check Stock

2 Flute Convenient 90° Chamfer End Mill Durable for Machine Tools for Chamfering(8 * 60L)

Made of tungsten steel cemented carbide material, high hardness and long service life.
This is 90 degrees 2 flutes chamfer end mill, precise and durable.
Suitable for machine tools, milling machines..
It is not only suitable for chamfering of ordinary machined parts, but also suitable for chamfering and deburring of accuracy difficult-to-chamfered parts..

Check Stock

90° Chamfer End Mill 2 Flute Tungsten Steel Cemented Carbide Precise for Machine Tools(1075L)

Suitable for machine tools, milling machines..
This is 90 degrees 2 flutes chamfer end mill, precise and durable.
It is not only suitable for chamfering of ordinary machined parts, but also suitable for chamfering and deburring of accuracy difficult-to-chamfered parts..
Made of tungsten steel cemented carbide material, high hardness and long service life.

Check Stock

Yosoo Electric Hand Planer 110V Portable Electric Wood Planer Hand Held Planer Woodworking Power Tool Accurate Smooth Door Planer Machine for Home Furniture

Powerful Electric Planer: This power hand planer for woodworking equipped with a 800W pure copper motor, providing 13000-16000RPM revolving speed,....
Wide Applications: This electric hand planer can be used for different projects. It is suitable for planing, chamfering and rabbeting various kinds of....
Easy to Operate: The woodworking planer is equipped with a contoured top handle and convenient trigger switch, this wood planer is easy to operate and....
Cutter Depth Adjustment Button: Electric wood planer with cutter depth adjustment button, depth can be adjusted according to the demand.
Reasonable Design:The design of the plastic casing is safer, the aluminum bottom plate is mirror-finished, and the planing effect is smoother. The....

Check Stock

Compact Router Wood Router Tool, 800W 110V Electic Woodworking Tools, Hand Palm Router Trim Router Tool for Woodworking, Edge Guide and Roller Guide

【Depth Adjustment，Easy to Use】Rack and transparent cover design for clearly observing the depth and accurate adjustment, gear design increases the friction between the rack and the transparent..
【Wide Application】The straight guide-effectively used for straight cuts when chamfering or grooving；The trimmer guide -trimming, curved cuts in veneers for furniture and the like can be done easily with the trimmer guide. Widely used in wood trimming, wood grooving, wood drilling, handicraft production, wood processing, cabinet processing, surface finishing, chamfering, curve cutting, pattern processing, and DIY..
【Powerful Motor & Premium Quality】30000 RPM, 800W motor delivers abundant power for professional trimming,milling and engraving work. The trimmer is made of high-quality aluminum barrel + polycarbonate PC, and the interior is made of high-temperature enameled wire refined motor, which is durable and has a long service life..
【Easy and Comfortable to Operate】Rubber-covered handle and small body for increased comfort and control. Trimming guide, roller running along the curve, ensuring the cutting is exact, curve..
【Package Included】Include varieties of accessories:12 PCS 1/4" milling cutter sets, 1 PC hex key, 2 PCS wrenches, 3 PA....

Check Stock

High Hardness 90° 2 Flute Tungsten Steel Cemented Carbide Durable Convenient Chamfer End Mill for Chamfering for Milling Machines(860L)

Made of tungsten steel cemented carbide material, high hardness and long service life.
Suitable for machine tools, milling machines..
This is 90 degrees 2 flutes chamfer end mill, precise and durable.
It is not only suitable for chamfering of ordinary machined parts, but also suitable for chamfering and deburring of accuracy difficult-to-chamfered parts..

Check Stock