Dremel 709-01 110 pc Super Accessory Kit
- 110 pieces included to Cut, Sand, Clean, Polish, Grind, Sharpen, and Carve.
- Magazine Clip for Sanding bands that folds out..
- EZ Lock Compatible Abrasive Buff for use with EZ lock Mandrel (sold separately).
Top Sanding Disc Mandrel Reviews
Yakamoz 2Pcs 2-Inch Roloc Sanding Discs Holder Roll Lock Disc Pad Quick Change Adapter with 1/4 Shank
- Heavy-duty rubber pad, aluminum core with nickel-plated removable steel shank.
- Compatible with 2-Inch Sanding Disc, Shank diameter: 1/4 inch, Maximum RPM: 30,000.
- Threaded pad backs screw tightly onto the mandrel, and allow for quick and easy changes..
- Accepts sanding, polishing, surface conditioning/preparation, bristle and other disc consumables.
- The high quality aluminum and the long-lasting rubber will provide sturdiness and strength.
Freud DHS6000 Diablo High Perf Hole Saw 6"x2-3/8"
- 60 millimeter (2-3/8-inch) cutting depth for deeper holes in one pass and increased productivity.
- Snap-Lock mandrel system for a quick and easy change with no down time.
- One-size fits all Snap-Lock mandrel fits all Diablo hole saws from 5/8-inch to 6-inches in diameter, Imported.
Dewalt DW4945 4-1/2\ Rubber Backing Pad (3 Pack)
- Nice sanding disc tool: our grinding disc holders for polishing wheels are in 3 different sizes, including 1 , 2 and 3 inches fixed diameter, can be applied with most drill or mandrel rotating tools, along with a replacement rod that can work with pneumatic or electric tools.
- With solid aluminum core and -plated removable steel, the handle is featured in very good strength.
- Quality material: quality aluminum and rubber material will provide firmness and strength to the grinding disc holders, making them suitable for electric drills, die grinders, air grinders, angle grinders and other electric or pneumatic tools.
- 3 Sizes combination: the 3 different sizes of this sanding discs pad holder kit can fully meet your different positions needs for polishing, and the rod can be quickly replaced, which can save working time to a large extent and improve your work efficiency.
- Easy to adapt to your tool: you will simply get a smooth and non-burr surface on various surfaces with our 1-inch, 2-inch and 3-inch disc pad holder adapters, just rotate the pad to fast adapt to your machine and deal with various projects.
- Wide uses: these disc pad holders can be applied for sandblasting, polishing, surface preparation or brushing and grinding discs, they can remove paint, r....
Crossarctic 2 Inch Sanding Discs Holder Roll Lock Disc Pad Quick Change Disc Adapter with 1/4\ Shank for Die Grinder Power Drill Driver
- Heavy-duty rubber pad, aluminum core with nickel-plated removable steel shank.
- Compatible with 2-Inch Sanding Disc, Shank diameter: 1/4 inch, Maximum RPM: 30,000.
- Threaded pad backs screw tightly onto the mandrel, and allow for quick and easy changes..
- Accepts sanding, polishing, surface conditioning/preparation, bristle and other disc consumables.
- The high quality aluminum and the long-lasting rubber will provide sturdiness and strength.
75Pcs 3 inch Quick Change Disc Set, Crossarctic Zirconia Roll Lock Sanding Disc with 1/4\ Holder for Die Grinder Surface Prep Strip Grind Polish Finish Burr Rust Paint Removal
- ✅Multiple Choices: 25 of each 36 Grit, 60 Grit and 80 Grit twist lock sanding discs. With 2 mandrel shafts, 1/4” drill or driver and die grinder do real well to do surface prep polishing grinding..
- ✅Completely Safe: Sanding disc 3 inch has non-woven, open web abrasive material which enables cool disc running and reduces the risk of heat induced warping and discoloration..
- ✅Save Time: The safe locking torque on the grinding disc is spirally connected to the shank holder, so this quick change locking device system reduces downtime..
- ✅Long Lasting: Zirconia Oxide is a tough abrasive, harder and more durable than Aluminum Oxide. The surface is attached with thermal and blocking resistant coating, which can improve the grinding efficiency and service life..
- ✅Widely Use: 3” sanding discs are excellent for using on surfaces of carbon steel, stainless steel, alloys, iron, wood, non-ferrous and used in shipbuilding, car building, aviation, machinery..
Arbor Mandrel Adaptor Motor Shaft Coupler Sleeve for Angle Grinder,Drill Converted into Cutting Machine Accessories
- Angle grinder converted into cutting machine arbor mandrel adaptor accessories.
- It is suitable for cutting disc, saw blade, polishing tool which inner diameter.
- This sleeve, installed on the grinding mill can be sanding disc polishing grinding, can also be installed 16MM or 20MM aperture of the slice,....
- Size: please check the detail illustration.
scottchen PRO Spindle Sander Adaptor 4-1/2\ x 1/2\ with Rubber Sanding Drum Kit OD 3/4\
- 【Function】This spindle sanding drum Kit is used for sanding and polishing curves, resurfacing, contouring, smoothing inner hole, and material removal etc. Especially excellent for woodworking projects..
- 【Application】This spindle mandrel with drum Kit suitable for diameter in 3/4 inch, 1 inch, 1-1/2 inch wood project treatment. Length 4-1/2” great for thick wood board sanding..
- 【Mandrel & Drum】This spindle sander adaptor mandrel head is 3/8” diameter, fit for most oscillating drill press. Rubber sanding drum in 3size 3/4.
Dremel 709-02 110-Piece All-Purpose Rotary Tool Accessory Kit- Includes a Carving Bit, Sanding Drums, Grinding Stones, Cutting Discs, and a Storage Case , Gray
- Ideal for cutting, sanding, polishing, grinding, engraving or carving. The Dremel 110-piece Multipurpose Accessory set is the complete start-up kit you need to complete a wide range of projects.
- Accessory set includes a reusable storage bins and lift-out trays for easy organization of the included bits.
- Carving/Engraving accessories: 194 Carving Bit (x1).
- Grinding/Sharpening accessories: 952 Aluminum oxide grinding stone (x1), 953 Aluminum oxide grinding stone (x1), 83142 Silicon carbide grinding stone (x1), 84922 Silicon carbide grinding stone (x1).
- Cutting accessories: 409 15/16” Thin-Cut, cut-off wheel (x12), 420 15/16” Cut-off wheel (x12), 426 1-1/4” Fiberglass-reinforced cut-off wheel (x1), 540 1-1/4” Cut off wheel (x1).
- Cleaning & Polishing: 414 ¼” Felt polishing wheel (x4), 421 Polishing Compound (x1), 429 1” Felt polishing wheel (x4).
- Sanding: 407 ½” Band & Mandrel (1), 408 ½” Band (6), 432 1/2” Band (6), 430 1/4” Sanding Band & Mandrel (1), 438 1/4” Sanding Band (5), 411 3/4” Sanding Discs (4), 412 3/4” Sanding Discs (13), 413 3/4” Sanding Discs (13).
- Collets & Misc.: 401 Mandrel (x2), 402 Screw Mandrel (x1), 415 Dressing Stone (x1), Wrench (x1).
- USA-BASED CUSTOMER SERVICE – Available by chat, email, phone or visit u....
30 PCS 2 Inch Quick Change Flap Disc 40 Grit 80 Grit 120 Grit Flap Discs Sanding Disc with High Density Zirconia Alumina Flat Disc for Angle Grinder
- Size:2-inch overall diameter x 1/4-inch arbor shoulder mandrel (5.1cm x 0.6cm) to get into tight spots and fit standard 2-inch angle grinders (no....
- Package Include:10 PCS 40 Grit Quick Change Flap Disc,10 PCS 80 Grit Quick Change Flap Disc,10 PCS 120 Grit Quick Change Flap Disc.
- Remove Heavier Stock:Angle grinder sanding wheel is designed for working on flat surfaces, it is coarser in build to easily remove heavier stock,....
ABN Aluminum Oxide Sandpaper Disc, 50pk - 2in 36 Grit Sanding Disc Set, Circle Sander Pads Abrasive Round Sandpaper
- [Get More Cutting Power]: Use the ABN 50pk Aluminum Oxide 2in Round Sandpaper Discs 36 Grit to prep, finish, and polish various materials.
- High-speed sanding grinds particles and removes target coating and scratches to leave you with a smooth, uniformed surface.
- [For Your Work]: Use sanding discs to clean and deburr or to blend, finish, and polish.
- Circle sander sandpaper will help you remove paint, rust, glue, or other stubborn adhesives and materials such as ferrous and non-ferrous metals, painted surfaces, and other building materials.
- [Built to Last]: Aluminum oxide abrasive sanding discs are known for their low heat retention, high cut rate, and durability for preparing and finishing material for your workplace and garage.
- Aluminum oxide material is bonded with resin to resist overload.
- [Fits Your Tools]: Each disk sander paper has a R-type torque screwed attachment that connects to your mandrel bit shaft (not included).
- Use round sand paper discs for right angle sanders, air sander drills, electric drills, or other sanding rotary tools.
- [Package Contents]: Each package include (50) 2-inch (5cm) disc sanding pads with r-lock base attachments.
- Aluminum oxide round sand paper have a 36-grit abrasion for heavy cutting and stripping, such as paint remov....
WEN 6524 Oscillating Belt and Spindle Sander & POWERTEC 71002 Abrasive Cleaning Stick for Sanding Belts & Discs | Natural Rubber Eraser - Woodworking Shop Tools for Sanding Perfection
- ... of 10 discs so you have enough to get any grinding job done. Each individual 2 inch disc is 80 grits..
- EASY TO USE- With our Quick Change mechanism All it takes is one simple turn and the disc is securely locked onto the mandrel. Use with any air or electric drill, die grinder, and other rotary tools for the utmost sanding control..
- HIGH QUALITY MATERIAL- Katzco flap discs are made of high quality aluminum oxide. Professional Quality grinding discs will level, strip, rebuff, and prep our surfaces. Removes paint off of surfaces as well..
- OUR SPECIALTY- the Katzco lineup includes an extensive selection abrasive flap discs and sanding flap wheels for sale. You can find a flap wheel in a wide range of sizes and in grits from 24 to 120G. Like all of our products, these flap wheels and discs can provide the innovative solution you need for your specific sanding and finishing applications..
- CHECK US OUT- When it comes to purchasing flap discs, you have plenty of options. However, a reputable company that cares about you and your project will help you experience a better result. Katzco has a large variety of tools, accessories and supplies to meet your immediate needs and your needs in the future..
Tshya Quick Change Disc Pad Holder, 4 Pack Roll Lock Disc Holder, with 1/4\ Shanks for Die Grinder Accessories
- ✔ FIRST CHOICE - Tshya Disc pad holder includes a hard rubber pad, aluminum core with nickel-plated removable steel shank. 2 kinds of common sizes 2/3 inch roloc pad holders to meet your various grinding requirements..
- ✔ TWO TYPES SHANKS - Quick change Disc Pad(TR/Type III) with 1/4" shanks, Round/Hex shank can use with any air or electric drill, die grinder, and other rotary tools for the utmost sanding control..
- ✔ 4 PACK - 3Pcs 2 inch discs pad holders, 1Pcs 3 inch discs pad holder ,2 Pcs 1/4" round shanks, 2 Pcs 1/4" hex shanks..
- ✔ EASY TO USE - The included 1/4'' shank allows operators to attach the assembly quickly and easily to common grinding tools, such as drills and air tools. All it takes is one simple turn and the disc is securely locked onto the mandrel..
- ✔ FACTORY OUTLET - Factory mass standard production, Guaranteed quality..