Top Molybdenum Mandrel Reviews

POP Rivet 18-8 Stainless Steel - 8-12 1/4 x 3/4 Gap 0.626-0.750 Qty-25

  • Dome head rivets are mainly used in applications where there is no access to the rear (blind side) of the joint. Domed head rivets are the most common type of rivets..
  • one is called the rivet hat and mandrel. Both the hat and mandrel are pre-assembled and ready to use..
  • Dome head rivets are installed by using a riveting tool to draw the mandrel which causes the body to deform and clamp down on the joint..
  • Upon reaching the designed clamping force, the mandrel snaps and is discarded. The mandrel side of the rivet, once the mandrel is removed, will leave the domed head exposed..
  • Rivet size and grip range is measured in installed length..
Check Stock

POP Rivet 18-8 Stainless Steel - 3-2 3/32 x 1/8 Gap 0.032-0.125 Qty-250

  • Dome head rivets are mainly used in applications where there is no access to the rear (blind side) of the joint. Domed head rivets are the most common type of rivets..
  • one is called the rivet hat and mandrel. Both the hat and mandrel are pre-assembled and ready to use..
  • Dome head rivets are installed by using a riveting tool to draw the mandrel which causes the body to deform and clamp down on the joint..
  • Upon reaching the designed clamping force, the mandrel snaps and is discarded. The mandrel side of the rivet, once the mandrel is removed, will leave the domed head exposed..
  • Rivet size and grip range is measured in installed length..
Check Stock

POP Rivet 18-8 Stainless Steel - 8-6 1/4 x 3/8 Gap 0.251-0.375 Qty-25

  • Dome head rivets are mainly used in applications where there is no access to the rear (blind side) of the joint. Domed head rivets are the most common type of rivets..
  • one is called the rivet hat and mandrel. Both the hat and mandrel are pre-assembled and ready to use..
  • Dome head rivets are installed by using a riveting tool to draw the mandrel which causes the body to deform and clamp down on the joint..
  • Upon reaching the designed clamping force, the mandrel snaps and is discarded. The mandrel side of the rivet, once the mandrel is removed, will leave the domed head exposed..
  • Rivet size and grip range is measured in installed length..
Check Stock

26PCS Cut-off Wheel Screw Mandrel Set, 2mm/3mm/6mm Screw Mandrel for Rotary Tools (1/8 Shank, 1/4 Shank)

  • 10 PCS 2mm (Approx 5/64)Screw Mandrel 3mm( Approx 1/8) Shank.
  • 10 PCS 3mm (Approx 1/8) Screw Mandrel 3mm ( Approx 1/8) Shank..
  • 3 PCS 6mm (Approx 1/4) Screw Mandrel 3mm (Approx 1/8) Shank.
  • 3 PCS 6mm (Approx 1/4) Screw Mandrel 6mm (Approx 1/4) Shank..
  • The base mandrel is suitable for discs such as diamond cutting wheels, resin cutting wheels and small saw blades..
Check Stock

4-Piece Bench Anvil Combination V-Slot Bench Pin Ring Round Bracelet Mandrel Vise Jewelry Making Metal Forming Kit

  • This 4-piece convenient bench tool kit includes a ring mandrel, Round bracelet mandrel, a wooden V-slot bench pin, along with a bench mounting system....
  • The wooden bench pin and bracelet mandrel will fit perfectly into the opening underneath the anvil (one at a time) - held when the entire device is....
  • The hardened steel ring mandrel is marked with U.S. sizes 1 through 15.
  • The hardwood bench pin measures is cut with a v-slot.
  • The Round bracelet mandrel is constructed from hardened steel and designed with a tang.
Check Stock

Gyros Stainless Steel Mandrel, 1/8" Shank, Fits 1/4" Arbor Hole Size Strong and Vibration-Free. Used to Mount Accessories like Miniature Circular Saw Blades, Cut-Off Wheels, etc. onto Rotary Hand Tools.80-18105

  • High-Quality Stainless Steel --- this Gyros Professional Mandrel is made of high-quality stainless steel which is resistant to corrosion and staining, which increases mechanical strength Making it practically strong and durable..
  • Essential and Sturdy Accessory --- Compatible with most rotary tools, this mandrel provides a supportive and sturdy mounting base for sanding, buffing, or cut-off wheels and discs, saw blades, cutting blades, and mini rubber grinding wheels..
  • 1 Mandrel and 2 Washers Included --- Package Includes 4 Pieces - 1 mandrel shank 1 screw head and 2 washers. Fits a ¼” center hole, with a ⅛” straight shank that is compatible with most power rotary tools like the Gyros PowerPro Rotary Tools..
  • Wide range of Uses --- This is the ideal wheel mandrel for use with rotary tool attachments and accessories, Gyros is the preferred brand by many polishers, metal workers, jewelers, hobbyists, craftsmen, and professionals..
  • Proudly made in the USA, for your safety, Make sure that Mandrel is seated correctly with the rotary tool and tightened before use, and always use Gyros Mandrel with proper protective clothing, safety glasses, or face shield..
Check Stock

Pen Mandrel Woodworking Pen Turning Mandrel Parts Woodworking Steel Pen Mandrel Saver Mechanical Accessory Tool Taper Shank #2 Morse Taper

  • Appropriate for many lathes: each wood turning pen mandrel is 7.95 inches in total length, 6 mm/ 0.24 inch in diameter, which is acceptable for most....
  • An adjustable tool: the package includes 1 useful woodworking pen mandrel saver with fine polished, the length of the shaft can be adjusted at will....
  • Firmly use: the mandrel for lathe is made of quality steel material, tough and sturdy, wear resistant and high temperature resistant, which can help....
  • Flexible to use: pen turning accessory is equipped with a bushing that can protect the mandrel from scratches, which can be moved easily and flexibly,....
  • Versatile uses: the lathe mandrel is designed for producing pens, with fine workmanship, which can reduce the off center turning, improving your work....
Check Stock

West Coast Paracord Easy Assistant Mandrel – Complicated Knots Made Simple – Ingenious Design – No Instruction Book Needed (1 Inch)

  • This mandrel is formulated with an ingenious design that will allow you to make complicated knots and turks in numerous styles and sizes. Customize any project without the complicated and lengthy tying..
  • Mandrel comes with pins and a rubber band to help keep cord in place. Mandrels are available in 4 different sizes (3/4 Inch, 1 inch, 1 ½ Inch, and 2 Inches)..
  • There is no instruction guide needed. Instructions are engraved in the mandrel to make for easy use..
  • Mandrel can be used to tie a Turks Head Knot and is great for hammer handles, axe handles, fishing rods, walking sticks, flashlights, golf clubs, umbrella handles, shovel handles and more!.
  • Take knot tying to the next level without the hassle. Forget the chaos of pins falling out, trying to follow patterns, and reading confusing construction, and upgrade to this West Coast Paracord Easy Assistant Mandrel!.
Check Stock

Benchmark Abrasives 2\ Threaded Mandrel with Female R-Type Backing- 1 Piece

  • QUANTITY: This listing is for one piece of a 2" mandrel..
  • Threaded Mandrel: Each mandrel has a female R-Type backing and can be used with any 2" disc that has a male R-type backer..
  • SAFETY: Wear all applicable safety gear when using this with power tools (eyes/ears/face/hands/body/etc)..
  • EASY TO USE: Threaded pad backs screw tightly onto the mandrel, and allow for quick and easy changes..
Check Stock

PHYHOO Bracelet Mandrel Shaping Bangle Bracelet Sizer Tool with Jewelry Mallet Jeweler's Hammer Bangle Size Measure Gauge

  • Plastic Round Bracelet Mandrel with diameter scale,you can visually see the diameter of the bracelet mondrel through the winding wire , bracelets mandrel may be circular deformation recovery.
  • Bracelet mandrel maximum diameter 75.6cm ,minimum diameter 37.6cm.
  • Order Contains:Plastic Round Bracelet Mandrel and Rubber Hammer.
  • Environmentally friendly materials, the appearance of new, can do bracelet display rack.
  • Rubber hammer is widely used in jewelry handicraft production process.
Check Stock

Megacast Stainless Steel Ring Sizing Mandrel Sizes 1-16

  • MATERIAL- This 13 inch ring sizer mandrel is made of stainless steel which has an elegant appearance, durable, no rust, and smooth surface, so your....
  • DESIGN- The professional mandrel is strong and heavy and has a screw hole on the bottom so that it can be screwed onto something and your hands are....
  • COMFORTABLE- This round mandrel is used with a rubber hammer to hold loose finger rings on a measuring stick, it can be used to flatten or strengthen....
  • USED AS A GIFT- The ring adjuster mandrel or gauge is perfect for a gift to your friends and family, or you can use this tool to choose the correct....
  • VERSATILE- The jewelers can use them for multi purposes like measuring, forming, sizing, wrapping, holding, shaping rings, and gold or silver jewelry....
Check Stock

PHYHOO Ring Sizer Set Metal Ring Mandrel Steel Ring Gauge Kit Finger Size Measure Rings Sizing Measurement Jewelry Making Tool Jewelers Tools US 0-13

  • Order Contains:Metal Ring Mandrel and Metal Ring Sizer (Pack of 1).
  • Ring Uses:Ring Can be Measure Finger Size.
  • Ring Mandrel Uses:Ring Mandrel Can be Select Ring size.
  • Often used in the production of jewelry rings, wedding rings can also be scheduled through this tool.
Check Stock

Squirrelly 3' Inch Stainless Steel Mandrel (2 Pack), High Quality 45 Degree Bends Angles Turbo Custom Exhaust System Fabrication Shops Piping

  • Squirrelly create high quality products and solutions with the same bootstrapped mentality upon which our company was founded. We are early adapters of new technology, utilizing cutting edge manufacturing processes to deliver a superior product..
  • Squirrelly 45 degree stainless steel mandrel bent pipe is designed and fabricated in MN, USA..
  • This 45 degree mandrel bent is made of 304 stainless steels 16-gauge raw finish..
  • The measurements for this stainless steel pipe is measure by 3″ inch diameter with the length of 5 1/2″ long..
  • Package includes: 2x 3″ Mandrel Bend 45 Degree 304 Stainless Steel Mandrel Bent Piping.
Check Stock