Sigma Electric ProConnex 52100 EMT/Rigid Conduit Hanger #0, 50-Pack
- Secures and supports Rigid and EMT conduit.
- Trade size #0 for 1/2-in EMT or 3/8-in & 1/2-in Rigid conduit.
Top Rigid Conduit Coupling Sets Reviews
Sigma Engineered Solutions Sigma Electric ProConnex 45101 Rigid Conduit Locknut 1/2-Inch, 20-Pack, Silver/Pewter
- Secures Rigid conduit, IMC and other threaded connectors to a box or enclosure.
- Compatible with 1/2-in Rigid conduit, IMC and other threaded connectors.
Sigma Engineered Solutions Sigma Electric ProConnex 45102 Rigid Conduit Locknut 3/4-Inch, 20-Pack, Silver/Pewter
- Secures Rigid conduit, IMC and other threaded connectors to a box or enclosure.
- Compatible with 3/4-in Rigid conduit, IMC and other threaded connectors.
Gardner Bender GCC-410 2-Hole Heavy Duty Conduit Strap, 1.66 in, Plastic, Gray, 1-1/4\
- Secures and supports Rigid and EMT conduit.
- Trade size #3 for 1-1/2-in EMT or 1-1/4-in Rigid conduit.
OhLectric OL-43183 Two Hole Rigid Pipe Strap - Sturdy Steel Strap clamps - Zinc Plated Steel - Reinforced Rib - Corrosion Resistant - Easy To Install - 1 Inch (Pack of 25)
- HIGH-QUALITY MATERIAL: Engineered with premium quality top grade material, Ohlectric’s two hole pipe strap is made to last for a long time and is highly durable. This metal strap is used when extra load bearing is needed to attach the conduit to wood, masonry or alike surfaces..
- EXTRA STRENGTH FOR PIPES: This metal pipe strap has a snap-in feature with a ribbed design which gives extra strength to this 2-hole rigid pipe strap. The sturdiness of this pipe strap makes it ideal for industrial usage. The Reinforced Hole on this strap gives more strengthening support to the pipings..
- GREAT RESISTANCE: Iron straps easily get rust when used on the plumbing pipes. To avoid this we have made this strap from zinc-plated steel which is highly resistant to corrosion. Highly corrosion resisting property of this rigid pipe strap makes it an ideal accessory for outdoor applications..
- EASY TO INSTALL: You can easily fix this two-hole rigid strap over the pipes using the snap-in installation feature. Without the help of complex tools or costly technicians, you can secure your conduit over any surface. This metal strap holds the pipe secur....
Sealproof 3/4-Inch Flexible Non-metallic Liquid-Tight Electrical Conduit Type B, UL Listed, 3/4\ Dia, 25 Feet
- The product is manufactured in United States.
- All sizes of rigid non-metallic conduit fittings are compatible with ENT when using ENT cement..
- Rigid non-metallic conduit fittings are recommended for use with Carlon 1-1/4 in. to 2 in. Flex-Plus Blue ENT.
- For adapting non-metallic conduits to boxes, threaded fittings and metallic systems.
Morris Products Conduit Hanger With Bolt Features –1/2 Inch - Secures Rigid, EMT Conduit to Mounting Surfaces – Insulated Supports - Zinc-Plated Steel – Threaded Rod - 100 Pieces
- SECURE CONDUIT: Ensure that your Rigid and EMT conduit is safely secure to mounting surfaces with this conduit hanger with bolt features..
- DURABLE CONSTRUCTION: Morris Products’ Conduit Hangers with Bolt Features are manufactured from zinc-plated steel for ultimate durability..
- SIZE AND QUANTITY VARIETY: Choose the exact size of conduit hangers you need with the variety from Morris Products that includes ½”, ¾”, 1”, 1 ¼”, 1 ½”, 2”, 2 ½”, 3”, 3 ½” and 4”. Obtain quantities of 25, 50 and 100 in each pack..
- IDEAL FOR MOUNTING SURFACES: Take less time to complete each task when equipped with these high-quality conduit hangers that include hardware, insulated supports and a threaded rod..
- COLLECTION OF COMPREHENSIVE ELECTRICAL TOOLS: Morris Products is proud to feature a variety of electrical tools and applications that range from wire connectors and non-insulated ferrule to nylon cable ties and cable splicers..
uxcell 3mm to 1/8 inch Bore Rigid Coupling Set Screw L26XD10 Aluminum Alloy,Shaft Coupler Connector,Motor Accessories
- Connection Diameter: 3mm to 1/8 inch, Total Length: 26mm /1.02 inch, Outside Diameter : 10mm/ 0.39 inch.
- Widely used in blowers,3D printer,DIY robots,CNC machine,stepper motors,etc. Similar to rigid clamp couplings, shaft couplers are used to hold....
- Top tight type rigid coupling with 2/4 screws to hold the shaft tightly.
- high torque with rigidity, low inertia and excellent sensitivity..
- NOTE: The rigid type basically does not allow eccentricity, and it must be fully adjusted during use..
- Single piece set screw clamp design makes it easy to set up the items on the shaft and control the holding capacity of the coupling..
Southwire - 59896940 Tools & Equipment FTSP45-125FML SIMPULL Fish Tape 4.5mm 125-Feet Flexible Metal Leader, Large Case
- Works great in either filled or empty conduit.
- TWO LEADER OPTIONS: comes with either a 360 swiveling flexible metal leader (580 lb. strength) or a non-conductive glow in the dark leader (380 lb. strength).
- FASTER, EASIER PULLS: low friction design allows the tape to easily glide through the conduit without binding at turns, joints or couplings.
- SPIRAL EXTRUDED POLYMER design does not rust and reduces the amount of effort required to push or pull the fish tape through EMT, IMC, rigid, or PVC conduit.
- DOES NOT RUST.EXTREMELY FLEXIBLE: Combining the strength of steel fish tape with greater -flexibility than fiberglass fish tapes, this fish tape will not break when folded.
Joint Coupling Metal Shaft Coupling Motor Connector - 0.5in×0.9in×2in
- CONNECT RIGID RODS-This joint or coupling connects rigid rods whose axes are inclined to each other..
- DURABLE-The universal joint is made of premium metal material, which is durable and has a long service life..
- COMMON USE-The shaft joint is commonly used for shafts that transmit rotary motion..
- BLACK-Our universal coupling is black and has simple appearance, which is not only practical but also beautiful..
- WIDE APPLICATION-The U-joint motor connector is widely used for connecting model cars, model ships, robots, etc..
Universal Joint Coupling Metal Shaft Coupling Motor Connector (0.5in×0.9in×2in)
- 【CONNECT RIGID RODS】This joint or coupling connects rigid rods whose axes are inclined to each other..
- 【DURABLE】The universal joint is made of premium metal material, which is durable and has a long service life..
- 【COMMON USE】The shaft joint is commonly used for shafts that transmit rotary motion..
- 【BLACK】Our universal coupling is black and has simple appearance, which is not only practical but also beautiful..
- 【WIDE APPLICATION】The U-joint motor connector is widely used for connecting model cars, model ships, robots, etc..
uxcell 10mm to 10mm Bore Rigid Coupling Set Screw L22XD16 45# Steel,Shaft Coupler Connector,Motor Accessories
- Connection Diameter: 10mm to 10mm, Total Length: 22mm /0.87 inch, Outside Diameter : 16mm/ 0.63 inch.
- Widely used in blowers,3D printer,DIY robots,CNC machine,stepper motors,etc. Similar to rigid clamp couplings, shaft couplers are used to hold bearings and sprockets tightly on the shaft, and are used in motor and gearbox assemblies..
- Top tight type rigid coupling with 2/4 screws to hold the shaft tightly.
- high torque with rigidity, low inertia and excellent sensitivity..
- NOTE: The rigid type basically does not allow eccentricity, and it must be fully adjusted during use..
- Single piece set screw clamp design makes it easy to set up the items on the shaft and control the holding capacity of the coupling..
uxcell 8mm to 8mm Bore Rigid Coupling Set Screw L22XD14 45# steel,Shaft Coupler Connector,Motor Accessories
- Connection Diameter: 8mm to 8mm, Total Length: 22mm /0.87 inch, Outside Diameter : 14mm/ 0.55 inch.
- Widely used in blowers,3D printer,DIY robots,CNC machine,stepper motors,etc. Similar to rigid clamp couplings, shaft couplers are used to hold bearings and sprockets tightly on the shaft, and are used in motor and gearbox assemblies..
- Top tight type rigid coupling with 2/4 screws to hold the shaft tightly.
- high torque with rigidity, low inertia and excellent sensitivity..
- NOTE: The rigid type basically does not allow eccentricity, and it must be fully adjusted during use..
- Single piece set screw clamp design makes it easy to set up the items on the shaft and control the holding capacity of the coupling..