Top Rebar Tying Reviews

DNYSYSJ Automatic Rebar Tying Machine, 8-34mm Hand Held Rebar Bender Machine Tool Kit, for Civil Building, Foor Pipe, Heating Floor Mesh, Steel Bar w/Pliers+ Charger (Orange)

  • ★Labor-saving -- Compact size, lightweight, easy to grab. It can save 3-5 times than man power by hand. Reasonable structure, advanced craft, simple and convenient operation, high efficiency and convenient maintenance..
  • ★Performance -- It is a miniature motor tool has the trait of safety and credibility. Rebar Tier is a hand held machine used to pack rebars quickly..
  • ★Specifications -- Material: Plastic + Metal.
  • Battery Charging Time: 1.5 hours full filling.
  • Applicable Scope Of Steel Strapping: 8mm - 34mm.
  • Knot The Required Time: 0.8 seconds at a time.
  • Machine Size: 275 mm * 65 mm * 240 mm / 10.83''x2.56''x9.45''(appr.).
  • ★Operating Skills -- 1. In use, the left tilt 45 degrees after banding, the next time the banding into a right tilt 45 degrees banding, left and right alternately banding. 2. When the machine is about to tighten, the machine will appear slightly shaking, while holding the hand of the machine not too tight, you can relax properly..
Check Stock

CCTI Rebar Tie Wire - 16 Gauge Black Soft Annealed 3.5 lb. Roll (Approx 340 Ft) - 1 Pack

  • Premium Quality - Soft Annealed Rebar Tie Wire.
  • Roll Dimension: OD 4.6" - Width 5.5" - Round Hole 1.9".
Check Stock

LTM CONCRETE Dually Rebar Chairs (12 Pack) – 7 Heights in 1 Chair - Quick, Easy & Versatile Support – Vertical & Horizontal Applications – Made in USA

  • EXTREME VERSATILITY: The patented Dually is the only rebar spacer of its kind – one chair holding bars at many different heights! Clips will firmly hold #3-6 bars at 1”, 1 ½”, 2”, 2 ¼”, 2 ½”, 3”. Turned on its side, Dually will support any resting mesh or bar at 2 inches (up to #12)..
  • WIDE BASE: Works on grade, Dually features a wide base that prevents sinking and tipping on soft surfaces. It also includes plenty of flow-through spacing for aggregate and concrete..
  • HEAVY DUTY: This chair is made with a special blend of materials that support heavy loads and strengthen your pour. Our chairs will never rust, corrode or degrade inside the concrete..
  • EASY TO USE: Set an entire rebar grid in just minutes and eliminate the need for wire-tying. Dually is already low-priced, but you’ll save even more in labor costs..
  • MADE IN USA: The entire LTM Concrete product line is made in the USA, including 100% of our raw materials. Buy LTM and keep America working..
Check Stock

KwikSafety (Charlotte, NC) PINZA Ironworker Pliers Spring Loaded Action Side Cutters Steel Rebar Cut Diagonal Wire Cutters Bi-Material Tempered Handles & Aggressive Cross-Hatched Knurl Lineman Pliers

  • PEAK PERFORMANCE - The PINZA Lineman Pliers designed to cut & twist rebar tie wire. Heavy duty wire cutters made from alloy steel (no rust pliers)! Industrial handle tempering absorbs the "snap" when cutting. Features deep knurl channels to provide a strengthened grip power for twisting & pulling. Rebar wire pliers w/ induction hardened knives for easy cuts & longer life. Durable plastic-dipped handles w/ a polymer rubber coat for greater grip & (1) 135° bent handle for added pulling leverage..
  • RELIABLE SIDE CUTTER PLIERS - These linesman pliers feature a spring loaded handle for self-opening & an angled head design for better rebar tying performance. Lightweight rebar pliers (12 oz total weight) w/ an overall length of 9.19in (23.3 cm). Square nose side cutter linemans pliers w/ jaw thickness dimensions of 1.28in (3.3 cm) x 1.156in (2.9 cm) & a knife length of 0.625in (1.6 cm). High leverage design & hot riveted joint ensures a greater cutting tool & gripping power (NO handle wobble)!.
  • UTILITY STEEL PLIERS - The KwikSafety PINZA ironworkers pliers combine secure jaw grip w/ powerful cutting & features more plier cutter power over standard cutting pliers. The perfect cutters pliers for the home, workshop or jobsite! Long "handform" handles & heavy-dut....
Check Stock

MAHIONG 40 Pack Mushroom Rebar Caps, Fit for 3/8-1 Inch Rebar Stake, Versatile Plastic Rebar Safety Caps Covers, Orange

  • PREMIUM MATERIAL - Made of high-quality thickened pp materials, our rebar caps are sturdy, not easy to crack, come off or deform, wear-resistant and can be used for a long time without fading. The tabs on the inside flexible enough to fit different-sized rebar rods..
  • BRIGHT ORANGE - The rebar safety caps are in orange color that can easy to find and identify rebar sticking up that might not be seen against dark (dirt) background, and probably prevent people from tripping over protruding rebar, with deadly consequences..
  • EASY TO INSTALL - Our mushroom rebar caps are designed to fit atop the rebar, flexible enough a versatile cap for multiple sizes of rebar. Just screw them on the rebar simply by hand, and they will stick fairly well in place..
  • RICH PACK - The package comes with 40 pcs plastic rebar safety caps, fit for 3/8 -1 inch (10 - 25 mm) rebar stake, it is just what you needed to safely cover rebar sticking up out of the concrete. Great for construction sites and marking the end of the stakes in the garden..
  • SATISFACTORY REFUND POLICY - For this order, you can enjoy a worry-free refund within 30 days and 24/7 after-sales service. If you are still dissatisfied with rebar mushroom cap or have other questions, please feel free to contact us..
Check Stock

VEVOR 1.5KW Electric Rebar Bender, 1''(25mm) Hydraulic Electric Hand Held Rebar Bender & Happybuy Electric Rebar Cutter, 1.7KW 110V Electric Hydraulic Rebar Cutter

  • Product 1: 0 - 90 Degrees Excellent Performance: This electric rebar bender is designed with excellent performance. It helps save valuable person-hours by bending rebar 1/4'' to 1" (6 to 25 mm) within 5 seconds. 1/4'' / 6 mm #2 Rebar(0-55°), 1'' / 25 mm #8 Rebar(0-90°). It is able to satisfy your various bending demands..
  • Product 1: 1500W Pure Copper Coil Motor: This portable rebar bender features a 1500W pure copper coil motor, which can run quietly with low noise and significantly improve your working efficiency, reducing unnecessary wear. Besides, a copper motor can extend this rebar bending machine's operating life to a large extent..
  • Product 1: Sturdy Machine Body & Head: The electric bender machine adopts the sturdy machine body and high-intensity hook, which are stronger and not easy to break. It can stand super-hard rebar with strong clamping force, which can help to reduce steel rebar waste. Multiple screws fixed on the head enforce the stability and sealing..
  • Product 1: Precision Pressure Relief Valve: This hydraulic rebar bender features a precision pressure relief valve and a hydraulic-powered piston for strong thrust and less power consumption. After the steel bar is successfully bent, you can pull the pressure relief valve to move the st....
Check Stock

Happybuy Electric Hydraulic Rebar Cutter, 900W Portable Electric Rebar Cut 5/8' 16mm #5 Rebar within 3 Seconds, 110V

  • 0 - 90 Degrees Excellent Performance: This electric rebar bender is designed with excellent performance. It helps save valuable person-hours by bending rebar 1/4'' to 1" (6 to 25 mm) within 5 seconds. 1/4'' / 6 mm #2 Rebar(0-55°), 1'' / 25 mm #8 Rebar(0-90°). It is able to satisfy your various bending demands..
  • 1500W Pure Copper Coil Motor: This portable rebar bender features a 1500W pure copper coil motor, which can run quietly with low noise and significantly improve your working efficiency, reducing unnecessary wear. Besides, a copper motor can extend this rebar bending machine's operating life to a large extent..
  • Sturdy Machine Body & Head: The electric bender machine adopts the sturdy machine body and high-intensity hook, which are stronger and not easy to break. It can stand super-hard rebar with strong clamping force, which can help to reduce steel rebar waste. Multiple screws fixed on the head enforce the stability and sealing..
  • Precision Pressure Relief Valve: This hydraulic rebar bender features a precision pressure relief valve and a hydraulic-powered piston for strong thrust and less power consumption. After the steel bar is successfully bent, you can pull the pressure relief valve to move the steel, and the piston will return to its origi....
Check Stock

VEVOR 1.5 KW Electric Rebar Bender, 1''(25 mm) Hydraulic Electric Hand Held Rebar Bender, within 5 s, 110 V

  • 0 - 90 Degrees Excellent Performance: This electric rebar bender is designed with excellent performance. It helps save valuable person-hours by bending rebar 1/4'' to 1" (6 to 25 mm) within 5 seconds. 1/4'' / 6 mm #2 Rebar(0-55°), 1'' / 25 mm #8 Rebar(0-90°). It is able to satisfy your various bending demands..
  • 1500W Pure Copper Coil Motor: This portable rebar bender features a 1500W pure copper coil motor, which can run quietly with low noise and significantly improve your working efficiency, reducing unnecessary wear. Besides, a copper motor can extend this rebar bending machine's operating life to a large extent..
  • Sturdy Machine Body & Head: The electric bender machine adopts the sturdy machine body and high-intensity hook, which are stronger and not easy to break. It can stand super-hard rebar with strong clamping force, which can help to reduce steel rebar waste. Multiple screws fixed on the head enforce the stability and sealing..
  • Precision Pressure Relief Valve: This hydraulic rebar bender features a precision pressure relief valve and a hydraulic-powered piston for strong thrust and less power consumption. After the steel bar is successfully bent, you can pull the pressure relief valve to move the steel, and the piston will return to its origi....
Check Stock

FAATCOI 60Pcs Rebar Caps, Plastic Mushroom Rebar Safety Cap Fits Rebar Stake Size #3-#7, 3/8 inch to 1inch,10M - 25M Surveying Markers, Concrete Stakes, Grading Marker, Surveyor Pins, and Spikes

  • ♥FITS MULTI REBAR SIZE: Come with 60pcs plastic mushroom rebar caps, and they are made to multi sizes of rebar, such as #3-#7, 10M - 25M steel bars, larger rebar may require hammer fit. It will meet your requirements well.
  • ♥HIGH-QUALITY MATERIAL: These rebar safety caps made of a solid piece of hard plastic, well made and friction, well-constructed and flexible enough underneath to fit different sized rebar rods, which makes them hard to be deformed or broken.
  • ♥ATTRACTIVE AND FUNCTIONAL: These mushroom-style safety caps treated with a brilliant orange finish for higher visibility, and mark the ends of exposed rebar, and blunt the rebar to help prevent injury or a falling worker from being impaled on the exposed rebar.
  • ♥WIDE RANGE OF APPLICATIONS: These plastic caps work great for your project to cover metal stakes and protect from protruding rebar at the construction site, it is also perfect for use as landscape and survey stake markers, concrete stakes, grading marker and more.
  • ♥BUY WITHOUT WORRIES: Every FAATCOI rebar caps offer 30 days money back and 100% satisfaction guaranteed. If you have any question with the products, please feel free to contact us by Amazon message..
Check Stock

Happybuy 900W Electric Rebar Bender 5/8Inch 16mm Hydraulic Electric Hand Held Rebar Bender Machine for Bending Steel Rope

  • Integral Hydraulic Cutter 7/8": It is a manual integral hydraulic rebar cutter, through the pump to generate pressure, to cut rebar, easy to operate. Max. Cutting Diameter: 7/8". This tool is suitable only for Rebar..
  • Durable Construction: The cutting head of this rebar cutting tool is made of high strength forged steel with high hardness. The rebar cutter blades have been through special heat treatment, having a good expansion ability..
  • Thickened Cylinder 13 Ton: It is a manual integral hydraulic cutter tool, through a 13 tons cylinder to generate pressure, with good tightness and no oil leakage, to generate pressure, to produce large force for rebar cutting. The one-person operation, save your time and energy..
  • Convenient Operation:Thickened, anti-slip, and insulated handles give you comfortable and safe using experience, suitable for long-lasting use. Durable design and exquisite workmanship make it fit for your needs. The rebar cutter is easy to store with a toolbox offered..
  • Professional Purpose: Hydraulic rebar cutters are widely used in construction, electricity, transportation, oil, metallurgy, and other areas where it is necessary to cut the rebar..
Check Stock

X XBEN Portable Safety Belt Fall Arrest Kit, With Hip Pad and 2 D Rings, Personal Protective Equipment Safety Climbing Harness

  • Side D rings ,compact,lightweight and portable design : Easy to wear and adjust . protect belt will hold and sustain you at a specific work location such as rebar tying, tower maintenance , wall-form work safety harness ,ladder work belt , trees climbing harness etc.
  • Durable polyester construction protective harness ,High tensile strength ,abrasion resistance ,low friction coefficient.
  • Fit for the waist 32″ – 50″ , your family can use same body belt , safety escape equipment for household prepared.
  • Weight limited:200KG ,breaking strength 22KN，width of the belt :4.2 cm ；waist support ：13x60x0.9 cm (5.2 x 24x 0.36 inch ).
  • Air permeability waist belt ,sweat-absorbent and comfortable.
Check Stock

MYCS Mushroom Rebar Cap (25 Pack) - Rebar Size: #3-#7, 10M - 25M

  • ✅USA's #1 Premium Concrete & Rebar Manufacturer, Distributor & Supplier.
  • ✅Rebar Mushroom Cap - Orange plastic caps to prevent abrasion and small injuries, from protruding steel rebar pieces.
  • ✅Construction Safety Rebar End Cap - For Workplace Protection NOT for Impalement Protection.
Check Stock

KEILEOHO 100 PCS Rebar Safety Caps,Yellow Plastic Mushroom Rebar Cap End Identification Bar Mushroom Building Construction Site Supplies Rebar Size: #3-#7, 10M - 25M

  • 100PCS MUSHROOM REBAR CAP - Widely used safety product that is used inside the construction industry to cover exposed rebar poles to prevent injuries..
  • REBAR SAFETY CAPS - Easily fits over exposed rebar poles to prevent rebar wear and damage..
  • YELLOW MUSHROOM CAPS - Yellow is a prominent color with high visibility..
  • HIGH QUALITY & WIDE APPLICABILITY - Made from durable plastic, Durable and suitable for construction sites. The rebar caps suitable for size:#3-#7, 10M - 25M steel bars..
  • WORRY-FREE SHOPPING - Please do not hesitate to contact us if any issues with our Rebar Safety Caps, you can return the product and get a refund within 30 days from receiving. Just remember that your satisfaction is our first priority..
Check Stock