Top Quick Disconnect Tubing Fittings Reviews

Keg Disconnect Ball Lock MFL Ball Lock Fittings Keg Connectors – Keg Coupler Stainless Ball Lock Keg Fittings 12-Piece

DISPENSE YOUR FAVORITE BEVERAGES: Use the G. Francis Ball Lock Keg Fitting Ball Locks 12-Piece Ball Lock Quick Disconnect Set with Liquid & Gas Disconnects, Swivel Nuts, & Hose Clamps to ferment and dispense craft cocktails, soda, and other beverages from your existing keg.
USE YOUR KEG: Each of the ball lock keg connectors (fittings) have an approximate 2.2-inch height and 1.3-inch outside diameter (5.6cm x 3.3cm) and is compatible with ball lock Cornelius (Corny) kegs and keg couple adapters for homebrewing.
Hose clamps have 0.2-inch to 0.5-inch (6-12mm) diameter while the barbed swivel nuts have 5/16-inch outside diameter (OD) fitted for 1/4-inch or 3/16-inch inside diameter (ID) hoses on your 3, 5, or 10 gallon keg.
BUILT TO LAST: Keg ball lock quick disconnects and hose clamp wings constructed from ABS plastic that resists rust and corrosion.
Swivel nuts and clamps constructed from food-grade stainless steel for maximum strength and longevity.
INSTALL EASILY: Tighten the swivel nut connecting the flare fitting before use.
Ensure correct fittings are installed on input and output posts – Light gray disconnect for gas inlet and black disconnect for fluid outlet.

Check Stock

Justrite 12878 Adapter for Carboy Cap, 120mm, 1/4in Barbs

83mm cap, 4 ports for 1/8" OD tubing, 3 ports for 1/4" OD tubing.
Tube fittings secure waste tubes to carboy providing a closed system preventing leaks or spills.
Two-piece cap design eliminates the need to disconnect tubing from the adapter to install a closed cap.
High-density polyethylene (HDPE) carboy features rectangular ergonomic design, saving valuable bench space.

Check Stock

Justrite 039-26530 Alum. Head for Cease-Fire Receptacle, 30 Gal

83mm cap, 4 ports for 1/8" OD tubing, 4 ports for 1/4" OD tubing.
Tube fittings secure waste tubes to carboy providing a closed system preventing leaks or spills.
Two-piece cap design eliminates the need to disconnect tubing from the adapter to install a closed cap.
High-density polyethylene (HDPE) carboy features rectangular ergonomic design, saving valuable bench space.

Check Stock

Universal 8mm Quick-Disconnect Plug Adapter Stainless Steel 1/8 BSPP Female Thread PCP Paintball Charging Fittings with Sealing O-Ring

Material - This 1/8" BSPP female thread quick disconnect plug is made of high-quality Stainless steel, Size: 26mm / 1.02 inch Length, male quick....
Accuracy - Use NC machining, accurately, accurately, suitable for 8mm converter plug and 1/8" BSPP male thread, supplied with sealing ring washer,....
Easy to Operation - Simply connect each fill adapter to the quick disconnect air tool fittings, It can withstand 3000-5000 psi pressure, this is one....
Quick Connect Adapter - Quick disconnect a male to female thread air tool fittings, will allow you to move air from one tank to paintball, to move air....
Application - Inflatable cylinder fittings connect to high pressure hose, compatible with PCP airsoft, air gun, paintball, paintball tanks and SCBA....

Check Stock

Woder WD-10K-ADV-JG Ultra High Capacity Inline Water Filter with ¼” John Guest Fittings - WQA Certified 10,000gal – Removes Chlorine, Lead, Chromium 6, Heavy Metals, Odors/Contaminants – USA Made

MADE IN THE USA - NO PLUMBING REQUIRED – Comes with 2 John Guest quick connect fittings on both sides. Fits all 1/4″ plastic flex tubing and flexible Copper tubing, used for water supply to ice makers, refrigerators, etc. (1/4” JG also fits the 1/8″ PEX TUBING as its O.D. is the same as 1/4” tubing.) DOES NOT FIT BRAIDED HOSES..
MADE IN THE USA - NO PLUMBING REQUIRED – Comes with 2 John Guest quick connect fittings on both sides. Fits all 1/4″ plastic flex tubing and flexible Copper tubing, used for water supply to ice makers, refrigerators, etc. (1/4” JG also fits the....

Check Stock

Justrite 12819 VaporTrap Round Carboy with Filter Kit, 83mm, 20L, 8 Ports

83mm cap, 4 ports for 1/8" OD tubing, 3 ports for 1/4" OD tubing.
Tube fittings secure waste tubes to carboy providing a closed system preventing leaks or spills.
Two-piece cap design eliminates the need to disconnect tubing from the adapter to install a closed cap.
High-density polyethylene (HDPE) carboy features rectangular ergonomic design, saving valuable bench space.

Check Stock

Cash Acme 3/8 Inch HG135 Thermostatic Mixing Valve with Compression Connections and Integral Checks Brass Plumbing Fitting 25686

CASH ACME THERMOSTATIC MIXING VALVE: This Cash Acme Thermostatic Mixing Valve is a sleek and compact under-sink temperature mixing valve designed to help prevent scalding.
COMPATIBILITY: This mixing valve is compatible with SharkBite copper tubing, CTS, CPVC, SDR-9 HDPE, and PEX fittings.
DURABLE AND HIGH QUALITY: Mixing valves are composed of durable lead-free brass for long-lasting reliability.
EASY TO INSTALL: The innovative design of this thermostatic mixing valve allows for quick and easy installation, with no tools, crimping, glue, or soldering required.
remove using a disconnect clip or disconnect tongs.
SPECS: Outlet temperature range is factory set at 120 degrees F and adjustable anywhere from 85 degrees to 130 degrees F to prevent scalding water temperatures.

Check Stock

Justrite 12937 Poly Carboy, 40L, 3in Sanitary Neck

83mm cap, 6 ports for 1/8" OD tubing, 1 port for hose barb.
Tube fittings secure waste tubes to carboy providing a closed system preventing leaks or spills.
Two-piece cap design eliminates the need to disconnect tubing from the adapter to install a closed cap.
Transform a carboy to collect waste from one or more HPLC machines.

Check Stock

Justrite 12860 Carboy Cap, 83mm, 1/2in Barbs

83mm cap, 6 ports for 1/8" OD tubing, 1 port for 1/4" or 3/8" hose barb.
Tube fittings secure waste tubes to carboy providing a closed system preventing leaks or spills.
Two-piece cap design eliminates the need to disconnect tubing from the adapter to install a closed cap.
High-density polyethylene (HDPE) carboy features rectangular ergonomic design, saving valuable bench space.

Check Stock

POHIR Pressure Washer Adapter Set, 14-Pack Quick Connect Fittings, 3/8 Power Washer Quick Disconnect Kit with M22 Swivel to 3/8'' Quick Connect, 3/4\ to Quick Release and M22 15mm to 14mm Male

14-Pack Quick Connect Kit - 4-pieces Metric M22-14 female to 3/8 quick plug, 2-pieces m22 14mm female to 3/8 quick disconnect, 2-pieces M22 14mm male to 3/8’’ quick disconnect, 2-pieces M22 14mm male thread to m22 14/15 male, 2-pieces 3/4 female to 1/2 quick connect, 2-pieces 1/2 plug to 3/4 male.
Easy Connect & Disconnect - M22 quick connect fittings help pressure washer hose quick connect to pressure washer pump or gun. The 3/4 quick coupler fits all 3/4" GHT (garden hose thread) watering equipment..
M22 Male to Male - 1x M22 15mm male to 14mm male and 1x M22 14mm to 14mm male adapter, convert the metric M22 14mm male thread to the M22 14mm or 15mm swirl as needed..
High-Quality Brass Quick Connect - Made of solid brass, stainless steel and engineering plastics, for a safe and leak free connection. These quick connect fittings are durable, rust proof, providing secure fittings and are convenient for frequent connection. .
Warm Tips: Inner diameter of M22 -14 swivel is 14MM NOT 15mm. Do NOT use the threaded 14MM to connect M22-15mm fittings, or it will cause leakage. Please lubricate the accessories before use..

Check Stock

Disconnect Clip Set for Pipe Fitting - Push Fitting Tool for Slip Removal - Disconnect Clip Removal Tool Set - 1/2", 3/4", 1/4", 3/8" and 1" Slip Fitting Removal Tools (Pack of 5)

: This push fitting removal tool does not require any additional materials or equipment for the installation process. Achieve a connection devoid of leakages in mere seconds..
- : This TigerBite plumbing tool can be used for a variety of different pipes. Whether you need to work on copper tubing, PEX fitting or CTS CPVC, this tool will work without any issues..
: The package of plumbing tools you receive includes a 1” disconnect clip, 1/4” disconnect clip, a ¾” disconnect clip, a 3/8” disconnect clip, as well as a ½” disconnect clip and a push-fit installation tip..
: With the help of this lead-free TigerBite plumbing tool set, you can re-use fittings and valves and even rotate the fixtures so that you can reassemble them to install them in tighter places..
: TigerBite fittings are certified up to 93 degrees Celsius and can be used at 200 PSI. They are also certified to ANSI/NSF T61 and ASSE 1061..

Check Stock

Cash Acme 3/8 Inch HG145 Thermostatic Mixing Valve with Compression Connections Tee Elbow and Integral Checks Brass Plumbing Fitting 24525

CASH ACME THERMOSTATIC MIXING VALVE: This Thermostatic Mixing Valve is a point-of-use thermostatic mixing valve designed to assist in the prevention of scalding.
this valve reduces the outlet flow to a trickle in the event of cold water supply failure.
COMPATIBILITY: This mixing valve is compatible with SharkBite copper tubing, CTS, CPVC, SDR-9 HDPE, and PEX fittings.
DURABLE AND HIGH QUALITY: Mixing valves are composed of durable lead-free brass for long-lasting reliability.
EASY TO INSTALL: The innovative design of this thermostatic mixing valve allows for quick and easy installation, with no tools, crimping, glue, or soldering required.
remove using a disconnect clip or disconnect tongs.
SPECS: Outlet temperature range is factory set at 120 degrees F and adjustable anywhere from 85 degrees to 130 degrees F to prevent scalding water temperatures.

Check Stock

Justrite 12847 VaporTrap Carboy with Filter Kit, 70mm, 20L, 8 Ports

70mm cap, 6 ports for 1/8" OD tubing, 1 port for 1/4" or 3/8" hose barb.
Tube fittings secure waste tubes to carboy providing a closed system preventing leaks or spills.
Two-piece cap design eliminates the need to disconnect tubing from the adapter to install a closed cap.
Ergonomic high-density polyethylene UN/DOT container provides excellent chemical compatibility.

Check Stock