Top Pulley Kit Reviews

Harmonic Damper Pulley Holding Tool & Crankshaft Pulley Holder for Toyota Tacoma Nissan Camry etc.

  • FITMENT: Harmonic Damper Pulley Holder works on Toyota 3.4L V6 Tacoma 1996-2004, 4 Runner 1996-2002, Tundra 2000-2004, T100 pickup 1996-1998.
  • Cam Pulley Holder fits many Camry, Toyota, Nissan, Mazda, OHC and many others ( please kindly check the size before purchase ).
  • HIGH QUALITY: This tool kit is constructed from high quality 40Cr steel to provide enough strength and durability.
  • and the powder coating is resistant to cracking, abrasion, rust and damage due to chemical exposure.
  • APPLICATION: Harmonic Damper Pulley Tool holds the pulley stationary for the center bolt to be removed without an impact, great for timing belt replacement.
  • Cam Holding Tool is great for timing belt changes, cam seal replacement, cam gear removal, camshaft pulleys installation etc..
  • A MUST-HAVE TOOL KIT: Harmonic damper pulley tool saves your time for the work on Toyota timing belts or to remove the crankshaft pulley.
  • Crankshaft Pulley Holder holds the pulley to stop it from spinning while tightening/loosening the bolt.
  • SATISFACTION GUARANTEE: If you're not 100% satisfied with Sunluway Cam Pull....
Check Stock

Orion Motor Tech Power Steering Pump Pulley Puller Installer Tool Set, Pump Pulley Remover Installer Tools Compatible with Ford, GM, and Chrysler

  • POWER STEERING REPAIR SET: This Orion Motor Tech tool kit for home and professional power steering repair pulls and installs any pump pulley with a 1-1/8, 1-1/4, 1-5/16, or 1-3/8 inch hub diameter.
  • COMPLETE 7-PIECE SET: This pulley pump puller kit includes a pulley remover, a pulley installer, 2 forcing screws, 1 sleeve, 2 puller jaws, and a disconnect tool.
  • the reversible puller jaw design also lets you check and repair pulley flanges with greater ease.
  • DURABLE PERFORMANCE: Each of these power steering tools is constructed from structural-grade AISI 1045 medium carbon steel for the necessary strength to get your work done right.
  • each piece is also heat treated and blackened for even greater dependability and superior corrosion resistance to give you years of use.
  • WIDE COMPATIBILITY: This pulley pump removal kit is compatible with the Saginaw, Thompson, and Ford C111 C2 power steering pumps in most Ford, GM, and Chrysler vehicles and the belt-driven vacuum pumps and press-on water pump pulleys in GM’s V6 engines.
  • the two forcing screws also work with most VW vehicles’ power steering systems.
  • USER FRIENDLY: This power steering pump pulley installer and remover set is intuitive but also comes with clear instructions for easy step by step operation.
Check Stock

OEMTOOLS 27031 Power Steering Pulley Puller and Installer Kit, Removes and Installs Power Steering Pump Pulleys on Most Domestic Vehicles, Ford, GM, VW

  • POWER STEERING PULLEY INSTALLER AND REMOVER: Our power steering pulley tool is designed to remove and install power steering pump pulleys on most domestic vehicles.
  • Power steering pulley remover pulls pressed-on water pump pulleys of GM V6 engines.
  • WORKS WITH MANY VEHICLES: This power steering pump pulley tool comes with two screws for use on most Ford, Chrysler, GM, and VW power steering pulleys with Saginaw, Thompson and Ford C111 and C2 pumps.
  • Pulls pulleys on GM belt-driven vacuum pumps.
  • HEAVY-DUTY POWER PULLER: The pulley clamp and removal screws in this OEM pulley puller installer kit are composed of rugged steel for long-lasting strength and durability.
  • Power steering pump pulley installer designed to tackle any small pulley job.
  • CONVENIENT STORAGE: Our power steering puller and installer set comes in a molded carrying case for safe storage and easy portability.
  • Take this power steering pump puller/installer from job to job while keeping your puller kit organized.
  • PRODUCT SPECIFICATIONS: Pulls any pulley with hub diameters measuring 1-1/8, 1-1/4, 1-5/16, or 1-3/8 inches.
  • Pulls pulleys on GM belt driven vacuum pumps.
  • Pulls pressed-on water pump pulleys of GM V6 engines.
Check Stock

Orion Motor Tech Power Steering Pump Pulley Puller/Installer Tool Set, Pump Pulley Remover Installer Tools Compatible with Ford, GM, and Chrysler Vehicles

  • POWER STEERING REPAIR SET: This Orion Motor Tech tool kit for home and professional power steering repair pulls and installs any pump pulley with a 1-1/8, 1-1/4, 1-5/16, or 1-3/8 inch hub diameter.
  • COMPLETE 7-PIECE SET: This pulley pump puller kit includes a pulley remover, a pulley installer, 2 forcing screws, 1 sleeve, 2 puller jaws, and a disconnect tool.
  • the reversible puller jaw design also lets you check and repair pulley flanges with greater ease.
  • DURABLE PERFORMANCE: Each of these power steering tools is constructed from structural-grade AISI 1045 medium carbon steel for the necessary strength to get your work done right.
  • each piece is also heat treated and blackened for even greater dependability and superior corrosion resistance to give you years of use.
  • WIDE COMPATIBILITY: This pulley pump removal kit is compatible with the Saginaw, Thompson, and Ford C111 C2 power steering pumps in most Ford, GM, and Chrysler vehicles and the belt-driven vacuum pumps and press-on water pump pulleys in GM’s V6 engines.
  • the two forcing screws also work with most VW vehicles’ power steering systems.
  • USER FRIENDLY: This power steering pump pulley installer and remover set is intuitive but also comes with clear instructions for easy step by step operation.
Check Stock

OEMTOOLS 37031 Power Steering Pulley Puller and Installer Kit, Removes and Installs Power Steering Pump Pulleys on Most Domestic Vehicles, Ford, GM, VW , green

  • POWER STEERING PULLEY INSTALLER AND REMOVER: Our power steering pulley tool is designed to remove and install power steering pump pulleys on most domestic vehicles.
  • Power steering pulley remover pulls pressed-on water pump pulleys of GM V6 engines.
  • WORKS WITH MANY VEHICLES: This power steering pump pulley tool comes with two screws for use on most Ford, Chrysler, GM, and VW power steering pulleys with Saginaw, Thompson and Ford C111 and C2 pumps.
  • Pulls pulleys on GM belt-driven vacuum pumps.
  • HEAVY-DUTY POWER PULLER: The pulley clamp and removal screws in this OEM pulley puller installer kit are composed of rugged steel for long-lasting strength and durability.
  • Power steering pump pulley installer designed to tackle any small pulley job.
  • CONVENIENT STORAGE: Our power steering puller and installer set comes in a molded carrying case for safe storage and easy portability.
  • Take this power steering pump puller/installer from job to job while keeping your puller kit organized.
  • PRODUCT SPECIFICATIONS: Pulls any pulley with hub diameters measuring 1-1/8, 1-1/4, 1-5/16, or 1-3/8 inches.
  • Pulls pulleys on GM belt driven vacuum pumps.
  • Pulls pressed-on water pump pulleys of GM V6 engines.
Check Stock

Harmonic Damper Pulley Holding Tool Crank Removal Wrench Tool & Crankshaft Pulley Holder for Lexus Toyota Nissan etc.

  • FITMENT: Harmonic Damper Pulley Holder works on Lexus 1990 and later: 3.0 L6, 3.0 V6, 3.3 V6, 4.0 V8, 4.3 V8, 4.7 V8.
  • Toyota 1996 and later: 3.0 V6, 3.3 V6, 4.0 V6, 4.7 V8.
  • and 4 cyl: 1983-1995 22RE, 1995-2004 2RZ & 1995-2004 3RZ.
  • Cam Pulley Holder fits many Camry, Toyota, Nissan, Mazda, OHC and many others ( please kindly check the size before purchase ).
  • HIGH QUALITY: This tool kit is constructed from high quality 40Cr steel to provide enough strength and durability.
  • and the powder coating is resistant to cracking, abrasion, rust and damage due to chemical exposure.
  • APPLICATION:  Harmonic Damper Pulley Tool helps to remove and install the crank bolt on Lexus and Toyota engines.
  • Cam Holding Tool is great for timing belt changes, cam seal replacement, cam gear removal, camshaft pulleys installation etc..
  • A MUST-HAVE TOOL KIT: Harmonic damper pulley tool saves your time for the work on toyota / lexus timing belts or to remove the crankshaft pulley.
  • Crankshaft Pulley Holder holds the pulley to stop it from spinning while tightening/loosening the bolt.
Check Stock

GM CLIMBING Hitch Slack Tending Pulley Kit for Doubled Rope Climbing System Basic Unit of General Hauling - 30kN Swing Cheek Micro Pulley (Black, Bushing) & Oval Locking Carabiner & 30in 8mm VT Prusik

  • Slack Tending Pulley Kit from GM CLIMBING, which contains: 1x 30in 8mm Friction Hitch VT Prusik, 1x 27kN Oval Twist Locking Carabiner, 1x 30kN Swing Cheek Micro Pulley..
  • Mainly used as core part of doubled-rope technique climbing system (ddrt), also widely use as flipline adjuster. For general pulley system, such kit can also made itself a pulley system with process capture..
  • Ball bearing or bushing 30kN Swing Cheek Micro Pulley are chosen for kit. It's easier to install or remove rope from pulley due to swing plates, much facilitating whole set-up process..
  • VT Prsuik with Heat Resistance! 50% Kevlar Fiber is mingled during sheath braiding, adding durability (cord rating to 25kN) and excellent heat resistance for your friction hitch..
  • It's always a good idea to have an oval locking carabiner to use with pulleys, for better balance, also for safer operation..
Check Stock

12001541 Dryer Drum Roller Kit, 306508 Drum Bearing Kit, WP6-3700340 Dryer Idler Pulley & WP33002535 Drum Belt Replacement for Maytag Crosley Dryer. Replace Parts 303373, 306508VP, 33001783, 33002535

  • [Overview] Repair Kit for Maytag Dryer. This Package Suit include: 2 pcs of Dryer Drum Support Roller Kit 12001541, 2 pcs of Drum Bearing Kit 306508, 1 pc of Dryer Idler Pulley WP6-3700340 and 1 pc of Dryer Drum Belt WP33002535..
  • [Drum Roller] Dryer Drum Support Roller 12001541 holds the drum in place while the drum rotates on the support wheels. Replace Part #: 12001541VP, W10116741, 3-3373, 303373, 303373K, Y303373, DE693, K35-248, 400518, AP4008534, PS1570070, EAP1570070, etc..
  • [Drum Bearing] Dryer Drum Bearing Kit/ Drum Glide Kit 306508 helps the drum rotate smoothly and quietly. Includes glide, cork/felt pad, and 2 rivets. Replace Part #: 306508VP, 3-6508, 312941, 3-12941, 1309, AP4037304, PS1804752, EAP1804752, etc..
  • [Idler Pulley] Dryer Idler Pulley WP6-3700340 maintains correct tension on the drive belt to spin the drum. Replace Part #: 33001783, 6-3700340, WP6-3700340VP, 1472812, AP4373393, PS2347262, EAP2347262, etc..
  • [Drive Belt] Drive/Drum Belt WP33002535 attaches to the motor pulley and spins the drum as the motor rotates. Replace Part #: 33001777, 33002535, WP33002535VP, 791135, AP6007983, PS11741110, EAP11741110, etc..
Check Stock

Hobie Anchor Trolley Kit 72020073 (Excludes Compass and 2019 and Newer Outbacks)

  • RANDDER Kayak Pulley Block constructed in heavy duty plastic material - super durable and strong, can withstand strong pull.
  • Pre-assemble pulley kit sold in quantities of two.
  • sheaves spin bearings has small friction.
  • The ball bearings, the sheaves, and the cheeks are treated black carbon for superior UV resistance.
  • Package Contents 2 Pieces Kayak Pulley Kit.
  • Great accessory for kayaking, boating and canoeing.
Check Stock

Weight Cable Pulley System Gym, Upgraded Cable Pulley Attachments for Gym LAT Pull Down, Biceps Curl, Tricep, Arm Workouts - Weight Pulley System Home Gym Add On Equipment

  • 【2022 Upgraded Value Kit & More Exercises Choice】 We designed the latest pulley system gym accessories after market research and communication with fitness experts. The Lat Pulley System kit has 2 pulleys and more cable machine accessories than others gym pulley system sets, allowing you to flexible DIY and choose your own way to do various exercises, such as Biceps Curl, Triceps Pull Down, Lat Pull Down, Row, Fly and etc..
  • 【Professional & Premium Material】Each attachment of our workout pulley system is carefully constructed and in good quality, which are able to withstand intense daily exercise sessions. The upgraded loading pin is made of thicken steel, the bottom increased sponge to ensure your floor from damage. 360° rota-table silent pulley, ensure quiet and stable of the pulley system operation.
  • Comes with two sizes(70" & 90") high-level cable to meet your various..
  • 【Easy to Assemble & Portable】tricep pulley system can be easily connected to the power racks,squat rack, pull-up bars, beams and any place where the strap can be installed.It provides a great versatility for your home gyms, garage, training studios,physic....
Check Stock

TooTaci 25MM Pulley Block System for Lifting with Rope and Hooks, 2pcs 304 Stainless Steel M25 Lifting Pulley Block Cable Wire Towing Wheel,66ft Nylon Rope & 2pcs Carabiner Hook

  • Pulley and Rope Kit : 2Pcs 25MM Crane pulley wheel,2Pcs x Carabiner Snap Hook Clips,20 meter Nylon Pulley Line rope.Loading 150 kg/300LB.
  • M25 Pulley Block: Heavy Duty Pulley is anti-rust and wear resistance with strong structure, surface is shock light processing, whose main material is 304 stainless steel..
  • Ergonomic Design : Pulleys for lifting fixed top for easily rope handling, smooth roller provides pretty good rope traverse, pulley rotation cylinder head is solid, durable, 360 degrees rotation to prevent rope from knotting.
  • Pulleys for lifting with Rope and Hook: 66ft solid braided polypropylene pulley rope - extreme strong with high tenacity.
  • Pulleys for Carabiner: Versatile binding, rigging & anchoring hardware - quick connect/dis-connect of ropes, chains, straps..
  • Outdoor Pulley System Lifting widely use for Make an Easy Pulley System for fastening rope to flagpole, small boats, awnings, blinds,....
  • As a topping lift for a portable garage door.
  • Works well for bird feeder pulley system,clothesline pulley system outdoors,garage pulley system,treehouse pulley system,gym pulley system...pull and climbing ropes to raise and lower.
  • Used to fit and tension a sail shade,....
  • fit for steel wire rope or any strong rope,for indoor outdoor lifting application....
Check Stock

Crankshaft Pulley Removal Install Tool Crankshaft Damper Remover Puller Compatible with Jaguar Land Rover 3.0 V6, 5.0 V8 303-1437 303-1438 303-1439 303-1440 303-1441

  • Applicable Vehicle Model: fit Jaguar F-Type, XE, XF, XFR, XJ, XJR, XK8, XKR 2009 to 2018.
  • fit Land Rover Discovery 4/Discovery, fit Range Rover, fit Range Rover Sport 2009 to 2018.
  • Remove and Install Crank Pulley: Set of tools required for the removal of the front crankshaft pulley (Crankshaft Vibration Damper) fitted to the Jaguar and Land Rover 3.0lt v6 and 5.0lt V8 petrol engines.It is a must have for removing and installing for land rover jag crank pulley.
  • Worked Perfectly: The crankshaft pulleys used on these engines are tightened to 200 Nm 270 degrees so are very tight to undo and must be held by a substantial holding tool which the kit provides. Also included in the kit are the puller component’s required to remove the pulley without damage.
  • Quality Gurante: Crankshaft crank puller pulley set made of high quality heavy steel, high hardness, strong and durable.All tools have undergone rigorous engine testing, to ensure that thecrankshaft pulley tool can be perfectly adapted to the engine, worked exactly as the OEM tools, and we offer 12 month warran....
Check Stock

3 Sets Aluminum Alloy Synchronous Wheel 8mm Mechanical Timing Pulleys for Milling Machine 3D Printer Parts

  • ❀Specifications:Item Type: Timing Belt Pulley, Material: Aluminum Alloy , Teeth: 60 years & 20 teeth, Pitch: Approx. 2mm / 0.08in, Aperture: Approx. 8mm / 0.31in, Belt Width: Approx. 6mm / 0.24in.
  • ❀Aluminum alloy pulley: The timing pulley is an aluminum alloy pulley whose surface has been oxidized to ensure maximum durability.
  • ❀Easy to use: This pulley kit includes 20/60 tooth synchronous wheels and 3 timing belts, easy to assemble and disassemble.
  • ❀Application: Timing pulleys can be widely used in mechanical transmission occasions such as milling machines, gear forming machines, drilling machines, hobbing machines, etc.
  • ❀Excellent substitute: The timing pulley of this 3D printer can replace the old or damaged parts, and install directly.
Check Stock