Top Professional Brake Pad Gauge Reviews

Kiene K-1390 Brake Lining Gauge

  • Quality: Made of premium plastic, not easy to fade, durable to use..
  • Range: Brake gauge sizes range from 2mm to 12mm..
  • Clear and Accurate Marks: Codes are clearly marked on the gauges, providing accurate depth readings..
  • Easy to take along: The gauges are small in size, you can take it in your car or toolbox, would not take up too much space..
  • Package Include: 1 x Brake Pad Thickness Gauge..
Check Stock

Fowler 74-150-020 EZ-Drum Electronic Brake Drum Gage

  • Central Tools-Brake Fforcee Rotor Gauge-Digital accuracy with Swiss electronics.-Drum gages have selectable depth stops to reduce measuring errors.-Pointed Aanvill measure scored or unscored surfaces.-Show customers why their rotors or drums need replacing or turning.-Rotor gages have depth rods to check pad and shoe wear.-Specifications:.
Check Stock

ABN Brake Tools 15-Piece Brake Kit with Brake Caliper Tool Brake Drum Puller Brake Adjusting Tool – Brake Tool Set

  • SERVICE BRAKES WITH THIS CALIPER COMPRESSION TOOL: The ABN Disc Brake Caliper Tool Set allows you to work on bearings, seals, axles, adjust clearance between drum brakes and shoe, or remove or install shoe return springs and brake pads.
  • This brake tools rear brake caliper tool set rotates the parking brake activated piston into the caliper cylinder.
  • FITS YOUR VEHICLE: Brake caliper compressor made for both disc and drum systems and covers most sizes of bearings and seals.
  • Press bearings and races into an open hub wheel assembly on most European and American cars.
  • Some tools in the kit are disk brake specific, such as the caliper piston retractor.
  • If you have a vehicle with rear disk brakes and a parking brake that uses the rear calipers, you will need the cube tool to spin and retract the caliper piston.
  • BUILT TO LAST: Brake pad spreader brake compressor tool pieces are constructed from chrome-vanadium steel (CR-V) for maximum strength and longevity.
  • The brake caliper press brake caliper kit pushes the caliper piston onto the disc brakes without disc brake caliper parking brake mechanism.
  • Caliper press brake pad tool kit provides access around emergency brake lever to service brake retaining spring.
  • EASY STORAGE: No longer will you need to worry about y....
Check Stock

Brake Adjustment Tool, Brake Booster Adjustment Tool, Brake Booster Push Rod Adjustment Tool for Adjustable Braking Distance of Brake Pedal, Suit for Most Brake Boosters with Adjustable Pins

  • ...um alloys, and the middle push rod is made of 304 stainless steel, and sliver phosphate coating for excellent durability and corrosion resistance for long-lasting use. Choose the best brake adjustment tool for your car and give yourself and your family the best protection.
  • Professional Brake Booster Adjustment Tool- Using a professional brake adjustment tool is responsible for your car. Yoolon master cylinder push rod length gauge suit for most brake boosters with adjustable pins. Such as 1968-76 corvette bendix, corvettes C-3M, 1971 ford F100, 56 chevy booster, frontier 4x4, 96 ford ranger, 65 falcon, 1992 ford F150 4wd ,GM boosters, MBM booster, etc. TIP:It won't work for all cars, it depends on the configuration of your brake booster and master cylinderd.
  • Experience the Beauty of the Journey More Attentively - How long has it been since you started a driving trip with your family and friends? Now you don't have to worry about car problems during the journey, Yoolon brake booster adjustment tool for you to block all car driving problems, get our brake adjustment tool to ensure the safety of you and your family and friends so that you enjoy the journey of....
Check Stock

Tread Depth Gauge, LCD Digital Tire Tread Depth Gauge with Inch and MM Conversion of 0-25mm Black Tread Checker Tire Tester Tread Check Measure Tool for Cars Motorcycle Trucks Vans SUV

  • [Professional Tire Tread Depth Gauge]: Our digital depth gauge with large LED LCD screen display, which is convenient reading, intuitive and reliable, so you can timely understanding of tire wear, it's a professional measurement of tire anti-skid pattern depth..
  • [Easy for Operating]: The tread checker supports switching between in/mm units, you can get data as needed, measuring range is 0-25mm , features manual power on/off for easy operating.
  • the average value can be obtained to obtain relatively accurate tire wear after multiple measurements.
  • [Resistant & Durable]: This tread check measure tool adopts electroplated iron probe design, which is wear-resistant and durable.
  • with fine workmanship and new data transmission hole that is practical for long time use.
  • [Portable and Practical]: The tire tread depth gauge with sturdy plastic shell and mini size, which is handheld and portable, ir's easy to carry around and use anytime.
  • [Widely Application]: The tire tread gauge is suitable for testing tread depth, brake shoe and pad wear, meantime, it can quickly measure the depth of the tire tread, which is convenient for judging the wear of the tire and effectively warning the potential traffic accident..
Check Stock

Cimeton 16Pcs Tire Tread Depth Gauge Set with Digital Tire Tread Depth Gauge, Brake Lining Thickness Gauge Set and 10Pcs Valve Cores and 2Pcs Tire Pressure Gauge for Cars SUVs Trucks

  • QUICK AND EFFICIENT READING – The brake thickness gauge allows you to quickly measure the external & internal brake pads to help identify if a vehicle has a sufficient amount of brake pad lining.
  • COLOR CODE INDICATOR SCALE – Designed with an easy-to-use and readable color code scale – Red = Replace, Yellow = Caution, Green = Safe which allows the user to quickly check brake thickness levels in a safe manner..
  • 8 PIECE SAE & METRIC GAUGE – 8 piece swatch style drum brake gauges are designed to help determine the level of wear to the brake lining of the vehicles in the following Metric/SAE sizes: 2mm (0.0787 inches), 3mm (0.1181 inches), 4mm (0.1575 inches), 5mm (0.1969 inches), 6mm (0.2362 inches), 8mm (0.3150 inches), 10mm (0.3937 inches), and 12mm (0.4724 inches)..
  • DURABLE AND LIGHTWEIGHT STEEL DESIGN – Constructed to be compact and calibratable for portable ease and to ensures long-term performance and durability of both the tool and your brake pads..
  • APPLICATION – Ideal for use with any vehicle.
  • standard and heavy-duty transportation vehicles..
Check Stock

EKUZO Digital Tire Tread Depth Gauge Measurement Tool Support Fractional Inch Metric Millimetre Measure,Car Tires Tester for SUV Van Truck Roadster Motorcycles (with Backup Battery)

  • Fraction display update - now it's able to display not only the inches and mm,but also the value in 32nds,64nds and 128nds (NOTE: random display FRAC,NOT always 32nds!).
  • Professional precise measurement - design for different car tires tread measurement and also suitable for brake shoe,pad wear.
  • Better reading - Digital LED Large screen,measuring range value 0-25.4 mm.
  • Smart chip - automatic power off when the gauge was not used and this car tire gauge can be zeroed at any position for easier adjustment.
  • Pre-installed battery and comes with one more backup battery,no need to worry about the suspension of work..
Check Stock

KAKO Adjustable Magnetic Gauge Tool,Camber Castor Strut Wheel Alignment Tool for Car/Truck Camber/Castor Strut Wheel Alignment and Tire Repair

  • ...nment-This adjustable gauge allows you to return the strut to the original camber position after dismantling and re-assembling the suspension or to check the amount of camber change before re-installing. Measures the Camber and Caster angle on the wheel hub or brake disc..
  • Professional Tools-Professional adjustable magnetic gauge tool measures the Camber and Caster angle on the wheel hub or brake disc, suitable for automobile cars motorcycles trucks vans SUV tire repair..
  • Easy to use-it has a powerful magnet could be easily mounted on all kinds of metal surface,easy to use.(Note:Please double check and make sure the panel is balance before using.You could screw the button behind the gauge to adjust panel level)..
  • This adjustable magnetic gauge tool also it could be used as a normal gradienter (Magnetic mount could be released),It has a simple leveling adjustment from -5 degrees to 5 degrees.The body of gauge is made of high density aluminum and precision level vial..
  • Satisfaction guaranteed! Try any product we sell for a full 30 days. If not completely satisfied, return it to us fo....
Check Stock

QuickCar Racing Products 61-103 Mini Brake Bias Gauge Panel

  • Disc and drum brakes - useable with both disc and drum style brake pads on any type of vehicle from passenger cars and trucks to heavy duty transportation.
  • Color-coded - color powder-coated blades help to quickly determine the brake pad status when examining brake lining.
  • Durable steel - the durable 20-gauge steel blades won't easily bend or break like plastic.
  • Stamped callouts - each blade has both metric and SAE measurements stamped into the metal.
  • Blade sizes - yellow blade tip measures 4/32 (0.1250)-inch (3.18mm) and the red blade tip measures 2/32 (0.06259)-inch (1.59mm).
Check Stock

Parking Brake Actuactor LR072318 Replacement for 2010-2016 Discovery 4 LR4 and 2010-2013 R-ange R-over Sport XXSR

  • Parking Brake Actuactor OEM Part Number: LR072318.
  • Parking Brake Actuactor Fit for: 2010-2013 LR4 / Discovery 4 V8 5.0L.
  • 2010-2013 Ran-ge Ro-ver Sport Supercharged.
  • The working principle of the electronic parking brake system is to control the parking brake through the friction generated by the brake disc and the brake pad. Compared with the mechanical hand brake, the control method has changed from the mechanical hand brake lever to an electronic button..
  • The electric parking brake or the EPB is an advanced version of a conventional parking brake or handbrake. Sometimes, people also refer to this system as 'Electronic Parking Brake'. Technically this system is a sub-part of more advanced 'Brake by Wire' system..
  • Professional installation and reprogramming is required. Please ask help for professional engineer to install this auto part. Cautious operation!.
Check Stock

YXGOOD Universal Magnetic Gauge Tool for Car Truck Adjustable Camber Castor Strut Wheel Alignment

  • 【Accurate Measurement】Measures the Camber and Caster angle on the wheel hub or brake disc. Attach the magnetic gauge to the hub or disc brake,suitable for accurate checking of the castor and camber angle Wheel Alignment tool"..
  • 【Adjustable Gauge】Allows you to return the strut to the original camber position after dismantling and re-assembling the suspension or to check the amount of camber change before re-installing..
  • 【Multi-Function】The magnetic gauge tool has a powerful magnet it can easily attached on all kind metal surfaces.Also it could be used as a normal gradienter.(Note:Please double check and make sure the panel is balance before using.You could screw the button behind the gauge to adjust panel level).
  • 【Easy To Read】Size: 4.5’’*1.2’’*0.8’’,it has a simple leveling adjustment from -5 degrees to 5 degrees.Body of gauge is made of high density aluminum and precision level vial,high strength plasticity..
  • 【Professional Tools】Allows adjustment to maintain correct wheel alignment and even tyre wear.Suitable for automobile cars motorcycles trucks vans SUV tire repair..
Check Stock

Vector Tools ISO/Bubble Flaring Tool Kit, 9 Piece | Includes Blow-Molded Case W/Mini Pipe Cutter

  • Make your own brake lines with the bubble Flaring I.S.O tool Kit, designed for metric soft steel brake lines requiring an “ISO” or bubble style flare.
  • Lever-lock flaring bar makes tool kit easy to use for professional and DIY mechanics.
  • Suitable for foreign (European, Japanese) and domestic vehicles (cars, SUVs, light trucks).
  • Yoke assembly, Flaring bar, Gauge/wrench, 10mm tubing, 4 adapters for 4.75mm, 6mm, 8mm, 10mm.
  • ISO/Bubble Flaring Tool Kit designed for metric soft steel brake lines where an “ISO” or bubble style flare is required, set included: Yoke Assembly, Flaring Bar, Gauge/Wrench and 4 adapters for 4.75mm, 6mm, 8mm, and 10mm Tubing.
Check Stock

EBC Brakes EBPCK1015 Complete Semi-Sintered V-Pads Brake Pad Change Kit

  • Fits: Harley Davidson FLHX Street Glide 2008-2013, FLHX Street Glide 2014-2015, FLHXS Street Glide Special 2015.
  • Complete Semi-Sintered Touring Bike V-Pads Brake Pad Change Kit includes 2 EBC FA409V Front Brake Pads and 1 EBC FA409V Rear Brake Pad.
  • EBC Brakes Semi-Sintered V-Pads are a new blended Semi-Sintered brake pad that combine the highest qualities of an organic brake pad with the endurance of a sintered equivalent brake pad.
  • The V-Pad range have been dyno tested and prove to be longer lasting than other cheap sintered aftermarket brake pads.
  • The Vee brake pad range are designed for the heavy cruiser/street bike market as a replacement brake pad.
Check Stock