Top Poe Power Supplier Reviews

TRENDnet 8-Port Gigabit Long Range Poe+ Switch, TPE-LG80, 65W Poe Budget, Ethernet/Network Switch, Long-Range Poe+ Extends Range Up to 200M (656 ft.), 16 Gbps Switching Capacity, Lifetime Protection

  • ETHERNET PORT CONFIGURATION: 8 Port Gigabit Long Range PoE+ Switch includes 8 Gigabit PoE+ ports provide a 16Gbps switching capacity to support edge network installations..
  • PoE+ POWER: A 65W PoE power budget supports up to eight Power over Ethernet devices. TPE-LG80, delivers data and power over Ethernet cables to PoE devices such as access points, VoIP phones, and IP cameras..
  • PoE and PoE+ SUPPORT: It supports both PoE and PoE+ devices with a 65W PoE power budget..
  • LONG RANGE PoE+: Enable the DIP switch to extend the PoE+ signal up to 200m (656 ft.) at 10Mbps for long distance PoE installations..
  • PORT ISOLATION: Ideal for surveillance networking applications, the DIP switch also enables port isolation.
  • LOW-NOISE OPERATION: Fanless design lowers energy consumption and eliminates operating noise.
  • PLUG-AND-PLAY: Easy setup, simply power up the switch and plug in connected devices.
Check Stock

YIDUOYUNCAI 6 Port PoE Switch (4*100Mbps PoE Port+2*100Mbps Uplink Port),78W,802.3af/at,VLAN,Metal Fanless,Unmanaged Plug and Play

  • 【6 Port PoE+ Switch】4*10/100Mbps PoE+ Ports(802.3at/af)&2*10/100Mbps uplink, power budget up to 30W per PoE port and 78W for the whole..
  • 【Extend Mode】When Extend Mode is enabled, the transmission distance of POE ports can be extended to 250m at transaction rate of 10M..
  • 【Active poe switch with 802.3af/at compliant】Poe switches support poe devices and non-poe devices, But when connecting passive poe device or non-poe device,the switch can only transmit data and cannot power your device,so the connected device needs to be separately powered. Or you can use it with active poe splitter..
  • 【AI PD Detection】The poe port will intelligently judge whether the device connected to the port needs power supply. If it is a non-poe device that does not need power supply, the switch will not supply power to these devices and will not damage the device..
  • 【Plug and Play】6 Port Unmanaged Network Switch Support automatically detect devices,easy to setup with no software installation or configuration required..
  • 【Fanless design】The fanless design makes poe switch work without any noise..
  • 【Network cable short-circuit protection mechanism】POE switch is stable and has strong anti-interference ability, protect the fault caused by the short circuit of the ....
Check Stock

Loocam PoE Switch 4 Port, 5 Port Gigabit PoE Switch – 4 Port PoE+ @ 65W and 1 Uplink Port, Unmanaged Ethernet Network Switch PoE, Plug and Play

  • Full Gigabit 5 Port PoE Switch: Unmanned PoE switch with 4 10/100/1000 Mbps RJ45 PoE+ ports and 1 Gigabit Ethernet Uplink port, 4 PoE+ ports providing up to 30W per port, total PoE power budget 65W(Include 48V 1.35A external power supply).
  • Power Over Ethernet, Plug And Play: Compliant with IEEE 802.3af/at POE standard, this gigabit unmanaged poe switch 4 port can automatically detect and identify PD devices that comply with the standard and supply them with power through the network cable. Plug and play, easy setup with no software configuration required. It can meet the POE power supply requirements of security monitoring, teleconferencing systems, wireless coverage and other scenarios..
  • 300 Meters Extend Transmission: Automatically detect the transmission distance and adjust the transmission rate, extend up to 300m(980ft) data and power PoE transmission range (Speed will drop to 10 Mbps). For better result over long distances transmission, use cat5e cables or above..
  • PoE Auto Recovery: This 4 port gigabit poe switch equipped with professional poe chip, it can intelligently detect the data exchange between the poe port and the terminal device. When an abnormality is detected, it will automatically restart and return to normal without affecting other po....
Check Stock

LoveRPi Power-Over-Ethernet (PoE) HAT Kit for Raspberry Pi 3 Model B+ with Black Case

  • ULTIMATE POWER OVER ETHERNET HAT FOR RASPBERRY PI 3 B+: Deliver clean and reliable power to the latest Pi 3 Model B+ by removing the problematic MicroUSB plug altogether! Power-over-Ethernet is both simple, power efficient, and cost effective compared to having multiple power adapters..
  • BUILT FOR CLUSTER NODES: Simplify cable management and expand your on-premise cloud with POE! Power five, ten, twenty Raspberry Pi 3 Model B+ boards through a single POE switch. This PoE HAT was designed to exceed the power delivery standards set by the official Raspberry Pi PoE HAT and other products available on the market..
  • POWER OVER ETHERNET SWITCH REQUIRED: Network switch must be compliant with IEEE 802.3af PoE standard. PoE power output must be within the budget of the switch when powering multiple boards. PoE switch and Raspberry Pi 3 Model B+ sold separately..
  • ANODIZED HEATSINK AND VENTILATED CASE WITH COOLING FAN INCLUDED: Raspberry Pi 3 Model B+ gets very hot and active cooling is the only way to prevent temperatures from exceeding 150°F! This kit includes everything you need to keep your PoE powered board operating at maximum performance. Raspberry Pi 3 Model B+ sold separately!.
  • NOT COMPATIBLE WITH RASPBERRY PI 4 OR RASPBERRY PI 3 MODEL B AND OLDER MODE....
Check Stock

TRENDnet 12-Port Gigabit PoE+ Smart Surveillance Switch, TPE-3012LS, 8 x Gigabit PoE+ Ports, 2 x Gigabit Ports, 2 x SFP Slots, 110W PoE Budget, Managed Switch, Long Range PoE+ up to 200m (656 ft)

  • DEVICE INTERFACE: 8 x Gigabit PoE+ Ports.
  • 4-Digit PoE LED display (total power budget, available power, consumption per port).
  • SMART SURVEILLANCE MANAGEMENT: These managed ONVIF switches are optimized for the surveillance industry.
  • surveillance mode provides a graphical dashboard interface with detailed information about the switch and each connected device..
  • LONG RANGE POE+: Long distance PoE+ networking up to 656 ft./200m away at speeds up to 10mbps.
  • INTEGRATION FLEXIBILITY: Managed switch features include access control lists, VLAN, IGMP snooping, QoS, RMON, SNMP, and syslog for monitoring and flexible network integration..
  • POE DEVICE ALIVE CHECK: Feature that attempts to recover an unresponsive PoE device connected to the switch. If a device(ex. PoE camera) is unresponsive, the switch auto-reboots the PoE port attempting to recover the device.
  • POE POWER: Each PoE+ managed ONVIF switch supplies up to 30W of power per port and data over a single Ethernet cable to PoE devices.
  • HARDWARE DESIGN: Provides gigabit PoE+ ports, SFP slots for fiber connectivity, and a 1U 19” rackmount design with brackets included.
  • SURVEILLANCE MODE: ONVIF switches are optimized for the surveillance industry, provin....
Check Stock

YuanLey 6 Port PoE Switch with 4 Port PoE+, 2 Ethernet Uplink, 100Mbps, 78W 802.3af/at, Extend Function, Metal, Desktop, Unmanaged Plug and Play

  • 【Port and Rate】This poe ethernet switch Include 4x10/100Mbps POE ports and 2x10/100Mbps uplink. All 1-4 POE ports support IEEE802.3AF/AT POE standard. The double uplink port can connect to nvr, switch, router, etc, make the network more reliable and flexible..
  • 【78W High PoE Power】This poe injector built-in industrial power supply. The whole power is 78W, each port up to 30W and 15.4W in the same time.**Please note: not compatible 24V passive PoE**.
  • 【Plug and Play】This poe network unmanaged switch support automatically detect devices, just plug in the power cord and network cable, no configuration required, easy to use..
  • 【Extend Function】 When the extend mode is enabled, single POE port supports 250m transmission distances and 10Mbps speed, and all PoE ports support VLAN isolation, improve the network safety..
  • 【Wide Applications】PoE and non-POE devices can be connected to this poe hub, such as poe camera/wireless ap, switch, router, computer, etc. It runs without noise and can be installed in office, home, and commercial locations. If you have any questions, please contact our official support, we will provide the best after-sales service.
Check Stock

YuanLey 5 Port Gigabit PoE Switch with 4 Port PoE+ 1000Mbps, 802.3af/at 78W Built-in Power, Fanless Metal Unmanaged Plug & Play

  • [All Gigabit Ports] Includes 4 Gigabit POE ports, 1 Gigabit UpLink Ethernet port, all ports up to 100/1000Mbps speed, has excellent network performance..
  • [78W High PoE Power] Support IEEE 802.3af/at PoE power supply. The whole power is 78W, up to 30W per port. Suitable for poe power supply for multiple devices..
  • [Unmanaged Switch] All ports support PoE, and support automatic detection, can connect POE and non-POE devices, such as PoE Cameras, APs, computer, nvr, router and so on. Plug and Play, no configuration required, can be easy installed..
  • [Extend Function] When the extend mode is enabled, all PoE ports support VLAN isolation, the traffic are isolated from each other, improve the network safety..
  • [Wide Applications] High Power, Built-in power supply. Compact design. Durable Metal. Bilateral heat dissipation. LED activity indicator lights. Can be widely used in security monitoring, computer networks, wireless coverage, office and home networks, etc.. Aslo we provide the best after-sale sevice, 100% Satisfaction..
Check Stock

TRENDnet 24-Port Gigabit PoE+ Switch 24 x Gigabit PoE+ Ports 370W Power Budget 48Gbps Switch Capacity RackMount Kit Included Ethernet Network Switch Metal Lifetime Protection Black TPE-TG240G

  • ethernet port interface: 24 x gigabit poe+ ports..
  • poe power budget & switch capacity: the large 370 w poe power budget supports up to 30 watts of poe power per port and all gigabit ports produce a 48 gbps switching capacity and supports jumbo frames up to 10 kb.
  • poe camera flexibility: the 24-port gigabit poe+ network switch recognizes non-poe, poe (15.4 w), and poe+ (30 w) cameras (or other poe devices) and supplies the required amount of power automatically.
  • rack mountable: this network switch is equipped with a rack mountable rugged metal enclosure with an included rack mount kit with rack mount brackets included for installation..
  • operating temperature: this 4-port gigabit poe+ ethernet switch is rated with an operating temperature range of 0 – 40 °c (32 - 104 °f)..
Check Stock

TRENDnet Powerline 500 AV Nano Adapter Kit, Includes 2 x TPL-406E Adapters, Cross Compatible With Powerline 600-500-200, Windows 10, 8.1, 8, 7, Vista, XP, Plug & Play Install, White, TPL-406E2K

  • GIGABIT PORTS: 1 x Gigabit Ethernet port and 1 x PoE+ Gigabit Ethernet port. Integrated power supply..
  • PoE POWER SUPPLY: This gigabit PoE+ injector supplies a PoE device with PoE (15.4W) or PoE+ (30W) power..
  • INSTALLATION FLEXIBILITY: This PoE+ injector has a wall-mountable design that accommodates most installations scenarios..
  • GIGABIT SPEEDS: Full Duplex 2Gbps Ethernet speeds with this PoE+ injector..
  • PoE DISTANCE: This Gigabit PoE Injector provides a PoE+ network connection up to 100 meters (328 ft.).
  • AUTO SENSING TECHNOLOGY: Auto-sensing technology delivers up to 30W to an 802.3at PoE+ device with backwards compatibility for 802.3af PoE (15.4W) devices..
Check Stock

POE Extender RJ45 4-Port 10/100M IEEE802.3at Power-in to IEEE802.3af Power-Out for Ethernet/PoE Power AP IP Camera IP Telephone and Other Network equipments

  • A PoE-powered PoE-sourcing ethernet switch. Used for network equipment with PoE signal function, as relay equipment to achieve signal extension. Total....
  • Applicable Range: A Used with AP, IP camera, IP telephone and the other network equipments in the situation of the lack of power line or far away from....
  • Network Medium: Cat5 or better UTP cables(less than 120m).
  • PoE input-1 RJ45 port, PoE output: 4 RJ45 port.
  • PoE Standard: IEEE 802.3at (power-in),IEEE 802.3af(power-out).
  • PoE Port Power: input power-25.5Watts,output power-24Watts.
  • NOTE: 1. Using high quality transmission cable can transmit up to 100~120m. With poor cable, transmission may not able to reach 80meters. 2.If the....
Check Stock

TRENDnet 16-Port Gigabit PoE+ Switch, 16 x Gigabit PoE+ Ports, 246W PoE Power Budget, 32 Gbps Switching Capacity, Desktop Switch, Ethernet Network Switch, Metal, Lifetime Protection, Black, TPE-TG160g

  • ETHERNET PORT INTERFACE: 16 x Gigabit PoE+ ports..
  • POE POWER BUDGET & SWITCH CAPACITY: The large 246 W PoE power budget supports up to 30 Watts of PoE power per port and all Gigabit ports produce a 32 Gbps switching capacity and supports Jumbo Frames up to 10 K.
  • POE CAMERA FLEXIBILITY: The 16-Port Gigabit PoE+ Network Switch recognizes non-PoE, PoE (15. 4 W), and PoE+ (30 W) cameras (or other PoE devices) and supplies the required amount of power automatically.
  • RACK MOUNTABLE: This network switch is equipped with a rack mountable rugged metal enclosure with an included rack mount kit and rack mount brackets included for installation..
  • OPERATING TEMPERATURE: This 16 port gigabit PoE+ Ethernet switch is rated with an operating temperature range of 0 – 45 °C (32 - 113 °F)..
  • TRENDnet LIFETIME PROTECTION: All metal TRENDnet switches are backed by our lifetime TRENDnet Manufacturer Protection..
Check Stock

PoE Texas 24 Multi Port PoE+ Injector with 48v 240w Power Supplies - 10/100/1000 Gigabit Passive Power Over Ethernet Means Versatility - 30W PoE Injector for WiFi Access Point PTZ Camera IP Phone

  • Save big on network upgrades and installations using this 24 port gigabit midspan PoE injector. Use it to power up to 24 IP cameras, desktop phones, WiFi Access Points, or other low voltage devices through a network data cable..
  • Instantly upgrade your network gigabit switch to PoE/PoE+. No need to purchase a larger 24 port switch. You can rely on your smaller, more cost-effective PoE switch and simply add Power + Data using the 802.3at PoE injector..
  • With this passive PoE Injector, you can add power to your data cable for a fraction of the cost of upgrading to a PoE capable network switch. Passive PoE power is ‘Always On’ with power delivery on Mode B pins (-4,5 +7,8)..
  • Plug and play. Our 24 port PoE adapter / injector transmits 10/100/1000 gigabit data, delivering lightning fast wired speeds with no loss of signal quality, up to 328 feet. Input voltage range: 48-56 Volts DC. 30 Watt output per port..
  • All of our PoE power injector products are backed by a One Year replacement warranty and a 30 Day, no questions asked, return policy. Expert help is only a phone call away. Please call 512 479 0317 for assistance..
Check Stock

PoE Texas 24 Multi Port IEEE 802.3at PoE+ Injector - Gigabit Data Active Power Over Ethernet for High Powered Devices 30W PoE Injector for WiFi Access Point & More with 2X 56V 120W Power Supplies

  • Power IP cameras, desktop phones, WiFi Access Points (WAPs) and more. This 802.3af/at compliant multi port PoE injector takes power from a DC source and adds it to a Cat5, Cat5e, or Cat6 ethernet cable to power your PoE Devices..
  • Instantly upgrade your network gigabit switch to IEEE 802.3at PoE+. No need to purchase a larger 24 port switch. You can rely on your smaller, more cost-effective PoE switch and simply add Power + Data using the 802.3at PoE injector..
  • Active PoE means the right power at the right time. An active PoE injector negotiates with the powered device to deliver the voltage needed, so there are no concerns about accidentally burning out lower powered or non-PoE devices..
  • Plug and play. Our 24 port PoE adapter / injector transmits 10/100/1000 gigabit data, delivering lightning fast wired speeds with no loss of signal quality, up to 328 feet. Input voltage range: 48-56 Volts DC. 30 Watt output per port. Kit includes two 120 watt power supplies for a total budget of 240 watts..
  • All of our PoE power injector products are backed by a One Year replacement warranty and a 30 Day, no questions asked, return policy. Expert help is only a phone call away. Please call 512 479 0317 for assistance..
Check Stock