Top Poe Midspan Injector Reviews

Gigabit PoE Splitter 12V 2A Output with IEEE 802.3af/at Standard Compliant 10,100,1000Mbps Power Over Ethernet Splitter Adapter for Security Camera CCTV Surveillance 5.5×2.1mm DC Plug Cable(PS5712TG)

  • Instantly add PoE to your network switch or router. This small, compact mountable PoE injector screws into the wall near an outlet or to the underside of desks, reducing clutter and offering versatility for your setup..
  • Power IP security cameras, VoIP desktop phones, WiFi access points, and other devices that accept passive 802.3af using a data network cable and this passive Power over Ethernet adapter / single port injector..
  • This midspan injector includes a UL certified 48 volt, 15 watt DC power supply to power devices labeled ‘802.3af’. Delivers power up to 328 ft from the injector site. Compatible PoE devices must have a wattage of 15w or less..
  • Plug and play. Our single port PoE adapter transmits 10/100/1000 Gigabit data, delivering lightning fast wired speeds with no loss of signal quality via one Data In port and one Data + Power Out port..
  • All of our PoE products are backed by a One Year replacement warranty and a 30 Day, no questions asked, return policy. Expert help is only a phone call away. Please call 512 479 0317 for assistance..
Check Stock

PoE Texas GPOE-8A | 8 Port Gigabit Passive 802.3af PoE Injector Without Power Supply

  • Instantly upgrade your network to PoE using this unmanaged PoE midspan injector with 8 PoE ports.
  • 10/100/1000 Gigabit Data capability with transparent VLAN passthrough.
  • Passive Mode A power and data delivery compatible with IEEE 802.3af devices like Cameras, IP phones, Wireless Access Points and More.
  • Power Supply NOT included - Use with a 48-56v DC power supply for IEEE 802.3af applications.
  • Backed by our 1 year manufacturer warranty - For expert technical support from Austin, TX please call 512 479 0317.
Check Stock

PoE Texas 12 Port Gigabit PoE Injector with 48 Volt 60 Watt Power Supply for 802.3af Devices

  • Instantly upgrade your network to PoE - Unmanaged PoE midspan injector with 12 PoE ports.
  • 10/100/1000 Gigabit Data capability with transparent VLAN passthrough.
  • Power and data delivery options for Mode A or Mode B compatible with IEEE 802.3af devices.
  • Includes 48 volt 60 watt UL approved power supply for a shared budget of 60 watts.
  • Backed by 1 year warranty - For expert technical support from Austin Texas, please call 512 479 0317.
Check Stock

PoE Texas GPOE-6AB | 6-Port Gigabit Poe Injector for 802.3af or 24 Volt Passive Devices | Power Supplies Available Seperately

  • Instantly upgrade your network switch or router to PoE using this 6 Port PoE midspan injector.
  • Use to power IP Phones, Access Points, IP cameras that require 10/100 or Gigabit Data.
  • Passive “always on” power and data delivery options for Mode A or Mode B compatible with IEEE 802.3af or 24 volt passive PoE devices.
  • Power Supply NOT included - use with a UL certified 24v 48v or 56v power supply.
  • Backed by 1 year warranty - For expert technical support from Austin, TX please call 512 479 0317.
Check Stock

PoE Texas GPOE-16A-48v240w | Gigabit 16 Port Passive Power Over Ethernet Injector for PoE Cameras IP Phones WiFi Access Points and More | Includes 48 Volt Power Supply 240 watts

  • Instantly upgrade your network to PoE - Unmanaged PoE midspan injector with 16 PoE ports.
  • 10/100/1000 Gigabit Data capability with transparent VLAN passthrough.
  • 30 Watt Mode A power (0.65 mA) and data delivery compatible with IEEE 802.3af/at devices.
  • Includes two 48 volt 120 watt UL approved power supplies for a shared budget of 240 watts.
  • Backed by 1 year warranty - For expert technical support from Austin, TX please call 512 479 0317.
Check Stock

PoE Texas | 24 Port Passive PoE Injector with 48V 120W Power Supply for 802.3af Devices - 10/100 Fast Ethernet Capability

  • Instantly upgrade your network to PoE using this 24 Port, 1U Rack mount Power over Ethernet midspan injector.
  • Use to power 802.3af compliant IP Phones, Cameras, WiFi Access Points and more.
  • Passive “Always-on” Power with Mode B operation.
  • Includes a 48 volt, 2.5 amp, 120 watt UL/FCC/CE approved power supply - or use the direct wire terminals with a larger DC power supply to expand your power budget.
  • Backed by our 1 year manufacturer warranty - For expert technical support from Austin, TX please call 512 479 0317.
Check Stock

TRENDnet 65W 4-Port Gigabit PoE+ Injector, TPE-147GI, 4 x Gigabit Ports(Data in), 4 x gigabit PoE Ports(Data + PoE Out), Multi-Port PoE+ Injector up to 100m(328 ft.), Add PoE+ Power to Non-PoE Switch

  • GIGABIT PORTS 4 x gigabit ports (data in) and 4 x gigabit PoE ports (data + PoE out).
  • EASY INSTALLATION No configuration needed simply connect a PoE network devices to this 4-port PoE+ injector.
  • 4-PORT POE TRENDnet’s 65W 4-Port Gigabit PoE+ Injector supplies up to 30W of power to four PoE (IEEE 802 3af) or PoE+ (IEEE 802 3at) devices at industry PoE standards for greater device interoperability.
  • POE DISTANCE The multi-port gigabit PoE+ injector provides four PoE network connections up to 100m (328 ft ) away from the 4-port PoE injector.
  • FANLESS DISTANCE The fanless design of the gigabit PoE+ Injector eliminates operating noise and lowers energy consumption.
Check Stock

TRENDnet Powerline 500 AV Nano Adapter Kit, Includes 2 x TPL-406E Adapters, Cross Compatible With Powerline 600-500-200, Windows 10, 8.1, 8, 7, Vista, XP, Plug & Play Install, White, TPL-406E2K

  • GIGABIT PORTS: 1 x Gigabit Ethernet port and 1 x PoE+ Gigabit Ethernet port. Integrated power supply..
  • PoE POWER SUPPLY: This gigabit PoE+ injector supplies a PoE device with PoE (15.4W) or PoE+ (30W) power..
  • INSTALLATION FLEXIBILITY: This PoE+ injector has a wall-mountable design that accommodates most installations scenarios..
  • GIGABIT SPEEDS: Full Duplex 2Gbps Ethernet speeds with this PoE+ injector..
  • PoE DISTANCE: This Gigabit PoE Injector provides a PoE+ network connection up to 100 meters (328 ft.).
  • AUTO SENSING TECHNOLOGY: Auto-sensing technology delivers up to 30W to an 802.3at PoE+ device with backwards compatibility for 802.3af PoE (15.4W) devices..
Check Stock

Psiber Data LM26 LanMaster 26 Link Tester

  • Scans all pins and displays PoE power including volts, watts, cable pair location, and end/midspan.
  • Locate active network devices and display capabilities (includes VoIP phones, IP cameras, access points, switches, NIC cards).
  • Displays the advertised data switch speed (10/100/1000) and duplex.
  • Power Pass Thru and two RJ45 jacks allows the Power Panel to be connected inline, allowing PoE power to be passed to the PoE device so it can be tested.
  • Placed inline between two devices, the power draw of the device can be measured in watts helping to prevent too much power draw - the number one reason for IP/PoE network failure.
Check Stock

PoE Texas 24 Multi Port IEEE 802.3at PoE+ Injector - Gigabit Data Active Power Over Ethernet for High Powered Devices 30W PoE Injector for WiFi Access Point & More with 2X 56V 120W Power Supplies

  • Power IP cameras, desktop phones, WiFi Access Points (WAPs) and more. This 802.3af/at compliant multi port PoE injector takes power from a DC source and adds it to a Cat5, Cat5e, or Cat6 ethernet cable to power your PoE Devices..
  • Instantly upgrade your network gigabit switch to IEEE 802.3at PoE+. No need to purchase a larger 24 port switch. You can rely on your smaller, more cost-effective PoE switch and simply add Power + Data using the 802.3at PoE injector..
  • Active PoE means the right power at the right time. An active PoE injector negotiates with the powered device to deliver the voltage needed, so there are no concerns about accidentally burning out lower powered or non-PoE devices..
  • Plug and play. Our 24 port PoE adapter / injector transmits 10/100/1000 gigabit data, delivering lightning fast wired speeds with no loss of signal quality, up to 328 feet. Input voltage range: 48-56 Volts DC. 30 Watt output per port. Kit includes two 120 watt power supplies for a total budget of 240 watts..
  • All of our PoE power injector products are backed by a One Year replacement warranty and a 30 Day, no questions asked, return policy. Expert help is only a phone call away. Please call 512 479 0317 for assistance..
Check Stock

Sophos APX 120 Indoor Access Point and 2YR Central Wireless Standard

  • Sophos APX 320X Outdoor Access Point - 2x2 MIMO, dual radio, dual 5 GHz capable, 4 x external omni-directional antenna included, further sector and directional antenna options available for separate purchase. Includes mounting bracket and clamps for wall and/or pole mount. 5-Year warranty, no extended warranty available..
  • Power adapter/PoE Injector not included, PoE Injector available for separate purchase. 11.5W max. power consumption (802.3af PoE Injector required)..
  • NOTE: Management in Sophos Central only upon launch..
Check Stock

Tripp Lite Gigabit PoE+ Midspan Active Injector - IEEE 802.3at / 802.3af, 30W, 1 Port, Power Over Ethernet (NPOE-30W-1G),black

  • ADDS POE DEVICES TO YOUR LAN WITHOUT A POE SWITCH: PoE+ injector uses existing Cat5e/6/6a cable to supply power to a PoE device connected to a non-PoE switch..
  • EXPAND YOUR WIRELESS NETWORK: The NPOE-30W-1G delivers both power and data to any IEEE 802.3at (PoE+) or IEEE 802.3af (PoE) device up to 100 meters (328 feet) away..
  • SAVES YOU TIME AND MONEY: This compact PoE plus injector delivers 10/100/1000 Mbps of data and up to 30 watts of power using existing Cat5e/6/6a cables. That means, in addition to not buying a new PoE network switch, you also don’t need to install new AC power lines and electrical outlets..
  • SIMPLE PLUG-AND-PLAY: Quick and easy plug-and-play installation with no configuration necessary. Compact, hand-sized plastic housing ready for mounting on any smooth surface..
Check Stock

iCreatin 2-Pack Wall PoE Injector Power Over Ethernet Adapter 802.3af 48V 24W 0.5A for Security IP Cameras IP Phones, 10/100Mbps

  • Raspberry Pi 3B+ can work with this poe injector after installed this PoE hat or micro USB PoE Splitter.
  • This injector lets you power 802.3af compatible devices, with no additional adapter needed. Just plug the network cable(not included) into your network switch and into the “Data In” port, then plug the cable to your device into the “PoE” port with your existing network cable.
  • This Adapter support 10/100/1000Mbps gigabit ethernet connection, RJ45 PoE port using 4,5,7,8 pin as power transfer, Please do not connect any device that does not support the “PoE” port, this will damage your device.
  • This is an 802.3af compatible device, but it does NOT include the 802.3af/802.3at compliant detection feature. It supplies power NO MATTER WHAT, so don’t plug the “PoE” side into anything that isn’t ready for it.
  • Compatible all 802.3af PoE power device as IP Phone, IP camera, Gateway , Switch, or More…...
Check Stock