Top Poe Fan Of Knives Reviews

UCTRONICS Raspberry Pi Rackmount Complete Enclosure Version 2.0 with PoE Functionality, Front Removable 19\ 1U Rack Mount with Captive Screws, Supports Up to 5 RPis

  • We've upgraded! The metal housing has added load-bearing bearings so that the housing is no longer flimsy! Note: Please be sure to check the Buy One Get One Free to get the side bracket so that the whole project works perfectly..
  • What's the difference? Uses Captive loose-off screws for true no-installation, no screwdriver is needed to introduce your module into the enclosure..
  • Easier setup: Screens and power buttons come pre-assembled, saving more setup time and allowing you to focus on your cluster build project..
  • No fear of noise - We replaced the previous noisy PoE hat fan with a new, more durable, and long-lasting ball-bearing fan, no more a noise nuisance..
  • REROUTING with PoE - It's come with mounting plates and rerouting boards with PoE function for Pi 4B, which also moves all of the I/O ports and SD card slot to the front, and adds a push-button switch to control the Pi easily.（not compatible with Poe + switch）.
Check Stock

LoveRPi Power-Over-Ethernet (PoE) HAT Kit for Raspberry Pi 3 Model B+ with Black Case

  • ...clean and reliable power to the latest Pi 3 Model B+ by removing the problematic MicroUSB plug altogether! Power-over-Ethernet is both simple, power efficient, and cost effective compared to having multiple power adapters..
  • BUILT FOR CLUSTER NODES: Simplify cable management and expand your on-premise cloud with POE! Power five, ten, twenty Raspberry Pi 3 Model B+ boards through a single POE switch. This PoE HAT was designed to exceed the power delivery standards set by the official Raspberry Pi PoE HAT and other products available on the market..
  • POWER OVER ETHERNET SWITCH REQUIRED: Network switch must be compliant with IEEE 802.3af PoE standard. PoE power output must be within the budget of the switch when powering multiple boards. PoE switch and Raspberry Pi 3 Model B+ sold separately..
  • ANODIZED HEATSINK AND VENTILATED CASE WITH COOLING FAN INCLUDED: Raspberry Pi 3 Model B+ gets very hot and active cooling is the only way to prevent temperatures from exceeding 150°F! This kit includes everything you need to keep your PoE powered board operating at maximum performance. Raspberry Pi 3 Model B+ sold separately!.
  • NOT COMPATIBLE WITH RASPBERRY PI 4 OR RASPBERRY PI 3 MODEL B AND OLDER MODELS: Previous Raspberry Pi boards do not feature the onboard PoE ....
Check Stock

48 Port Gigabit PoE Switch Unmanaged with 48 Port IEEE802.3af/at PoE+@400W, 2 x 1G SFP, NICGIGA 50 Port Network Power Over Ethernet Switch, Desktop/Rackmount

  • 48-port Gigabit PoE+ switch with 48 PoE+ 10/100/1000 Mbps RJ45 ports, 2 Gigabit uplink SFP ports. SFP ports can provide more bandwidth and connect different devices such as routers, NVRs, etc..
  • Supporting IEEE 802.3af/at, each port provides up to 30W of power and a total PoE power budget of 400W. Widely used in HD IP cameras, IP phones, wireless access points, computer network equipment and other scenarios. 【Please note: not support passive PoE.】.
  • 4KV lightning protection design can protect products and equipment from damage even in bad weather. With industrial-grade fan and metal shell to ensure good heat dissipation and stability of the device. Supports desktop and rack mounting (built-in mounting ears)..
  • Unmanaged plug and play, support power detection function, automatic detection of PD devices, compatible with non-POE devices to provide data connection, no software or configuration required, support automatic MDI/MDIX and non-blocking data forwarding..
  • Every NICGIGA PoE switch is rigorously tested for reliability, quality and performance. We provide a one-year warranty and lifetime technical support for the entire product..
Check Stock

Zyxel 8-Port Gigabit Ethernet Layer 2 Managed PoE+ Switch with 180 Watt Budget and 2 Gigabit Combo Ports and Hybrid Cloud Mode [GS2220-10HP]

  • Fully managed layer 2 switching solution. 8 port PoE+ GbE 100/1000 Mbps + 2 port GbE combo (SFP/RJ-45) (10 ports total)..
  • 180W PoE+ (802.3af/ 802.3at) power budget with intuitive 5-segment PoE indicator which gives quick view of current PoE usage..
  • NebulaFlex Pro gives you the flexibility to switch between standalone and intuitive Nebula cloud managed mode with 1-Year Pro Pack bundled..
  • L2 multicast, IGMP snooping, MVR and voice VLAN for convergence. Enhanced network protection with IP source guard, DHCP Snooping, ARP inspection, CPU protection..
  • Fan-less design delivers silent operation..
Check Stock

UCTRONICS PoE HAT for Raspberry Pi 4 with Case, 802.3at Power Over Ethernet Expansion Board for Pi 4 B Board, with Cooling Fan

  • Perfect for Pi 4: This PoE HAT can be used with Raspberry Pi 3 model B+ and Raspberry Pi 4 model B (not included). Please contact us if you received wrong pieces, we will send you a new case kit ASAP..
  • Higher Output Power: DC 5V (3A Max) / 12V (2A Max) via on-board terminal block.
  • Over-temperature Protection: The 25mm×25mm brushless cooling fan will turn automatically when the temperature of the processor is high..
  • Well-ventilated Case: Cut-outs for every port of Pi 4 board and PoE hat, easy to access to all ports as well as supplying well-ventilated environment..
  • NOTE: PSE (Power Supply Equipment) is needed to supply PoE signal to the Raspberry Pi, such as a PoE switch or injector..
Check Stock

UCTRONICS PoE HAT for Raspberry Pi 4B/3B+, Power Over Ethernet (PoE) Support 802.3af PoE Network Standard, Compatible with Pi 4B / 3B+

  • For Pi 4 and 3 B+: This PoE HAT can be used to deliver clean and reliable power to the raspberry pi 3 model B+ and raspberry pi 4 model B (not included). Note: It's not recommend to use RJ45 with aluminum foil shielding to connect the PoE Hat to the PoE switch..
  • Update: This lastest UC-858 mini PoE HAT Compatible with 48V non-standard switches so it can supports more brands of switches..
  • Smaller Size: 65*44*13mm, nearly half the official size, save more space for your other hardware, can be held in the most case for Raspberry Pi..
  • Well-ventilated Environment Recommended: It’s normal to become hot when the HAT operating. Please make sure the adequate air circulation to help it dissipate heat to ensure stable operation. If used with Pi 4, you can search ASIN B07WMNXB4V to get the case with the fan..
Check Stock

MokerLink 18 Port Gigabit PoE Switch, 16 Gigabit PoE+ Ports, 2 Gigabit Uplink, 250W IEEE802.3af/at, Metal Rackmount Unmanaged Plug and Play Ethernet Switch

  • 18 Gigabit Ethernet Ports: Includes 16 Gigabit POE+ ports and 2 Gigabit UpLink. All port support 10/100/1000Mbps, high speed transmission.
  • 2 uplink, can be more flexible to connect to different network devices, such as routers, NVRs, servers, etc..
  • High POE Power: Maximum support 250W high output power, built-in power supply makes installation easier. Support IEEE 802.3af/at, each port max power supply reached 30W. *Please note: not support passive 24V PoE.*.
  • Unmanaged Plug & Play: Support Power Detection function, automatically detect devices, can be compatible with non-POE devices to provide data connectivity. Plug and Play, just plug in the power cord, connect the ethernet cable directly to the device, can be used without configuration..
  • Extend function: The traffic are isolated from PoE Port 1-16,just only communicate with the uplink port 17/18, reduce network congestion, increase bandwidth utilization and improve network security.
  • Widely Used: Small and compact size design. Durable Metal housing. LED indicator lights. Industrial fan ensure good heat dissipation. Widely used in home and business network, such as IP cameras, Wireless Access Point, Computer Networks devices, etc..
Check Stock

UCTRONICS Ultimate Rack with PoE Functionality for Raspberry Pi 4, 19\ 1U Rackmount with PoE HAT, All IO on One Side, OLED Display, Power Switch, and Cooling Fan

  • Improvement - PoE Functionality: The adapter board was turned to reroute all those ports into a full-functioning Power Over Ethernet HAT, and it’s compatible with any PoE switches.（not compatible with Poe + switch）.
  • VISIBLE: A 0.91 inch OLED screen, the first line shows the IP address, and he second line loops through three rows: the CPU temp & usage, SD card space usage and memory usage. You can also program it to show something else..
  • Re-locate: Remove all of the I/O ports and SD card slot to the front to access easily, and the push-button switch allows you to do a shutdown without having to command it from the OS or unplugging the power cable..
  • Effective Cooling: The rerouting boards assembled with a cooling fan, which provides powerful heat dissipation to keep the Rpi from overheating..
  • Note: The PoE HAT output is 5V 2.5A, Please be careful not to take on too much load. And it doesn't support QC protocol..
Check Stock

Piranha Decoration Corpse Flower Decor Chomper Cannibal Plant Sculpture Horror Piranha Decoration Luxury Prop Display Halloween Horror Decor A Without Basin

  • From Icons, Edgar Allan Poe w/ Skull, as a stylized POP vinyl from Funko!.
  • Stylized collectable stands 3 ¾ inches tall, perfect for any Icons fan!.
  • Collect and display all Icons POP! Vinyls!.
  • Funko POP! is the 2017 Toy of the Year and People's Choice award winner.
Check Stock

Waveshare Mini-Computer Add-ons Based on Raspberry Pi Compute Module CM3 / CM3L / CM3+ / CM3+L Comes with PoE Expansion Board

  • The Add-Ons Include: Expansion Board, Metal Case, Power Supply, And Cooling Fan. Easily Make A Mini-Computer If You Happen To Get A Compute Module.
  • Compute Module PoE Board: Dual CSI Camera Ports, PoE (Power Over Ethernet) Feature, Versatile Peripheral Interfaces.
  • Ingenious Cut-Out, Highly Matching The Master Board, Along With Clear Labels, Easy To Use.
  • Comes With Cooling Fan, Allows Being Controlled By Software Via GPIO, Or Being Powered Directly From 5V Supply.
  • Smooth And Clean Metal Bottom Surface, With Mounting Holes On Both Sides, Suitable For Industrial Applications.
Check Stock

Ubiquiti Networks US-8-60W-5 Unifi Switch (5-Pack)

  • The UniFi Switch delivers the forwarding capacity to simultaneously process traffic on all ports at line rate without any packet loss | Up to 3 fan levels.
  • Product dimensions – 19.09” L x 14.75” W x 1.72” H | Ports quantity – 48 | Background noise level – 27.5 dB | Power method – 100-240VAC/50-60 Hz | Weight – 13.5 lbs. | Max power consumption – 500W | Operating temperature – 23 to 104° F.
  • The UniFi Switch features auto-sensing IEEE 802.3af/at PoE to power multiple devices on the network | Switching Capacity – 140 Gbps.
  • Two SFP ports support uplinks of up to 1 Gbps | For high-capacity uplinks, each 48-port model includes two SFP+ ports for uplinks of up to 10 Gbps.
  • Each switch port offers custom settings: port name, PoE, network/VLAN configuration, and operation mode (switching, mirroring, or aggregate) - as well as 802.1X Authentication and Radius VLAN support.
Check Stock

The Official Bob Ross Coloring Book: The Colors of the Four Seasons

  • 27 PIECE BUNDLE INCLUDES: (14) 37ml tubes of oil paint, (12) brushes and painting knives, (1) Velono roll-up case..
  • BOB ROSS OIL PAINT: Colors included (37ml each) are Alizarin Crimson, Bright Red, Cadmium Yellow, Dark Sienna, Indian Yellow, Midnight Black, Mountain Mixture, Phthalo Blue, Phthalo Green, Prussian Blue, Sap Green, Titanium White, Van Dyke Brown and Yellow Ochre.
  • BOB ROSS PAINT BRUSHES AND KNIVES: #3 Fan Blender, #6 Fan Blender, Half Size Round, 1" Round Foliage Brush, #5 Detail Knife, #10 Painting Knife, 2" Blender, #2 Script Liner, #6 Filbert, 2" Background, 1" Oval Bristle, and 1" Landscape Brush..
  • VELONO ROLL-UP CASE: Protect your investment! This durable roll-up case provides a convenient way to store and protect your brushes and painting knives..
  • PLEASE NOTE: The manufacturer is switching to metal paint tubes. Some tubes in this set will be in the new packaging..
Check Stock

Ubiquiti UniFi Switch - 24 Ports Managed (US-24-250W),White

  • The UniFi Switch delivers the forwarding capacity to simultaneously process traffic on all ports at line rate without any packet loss | Up to 3 fan levels.
  • Product dimensions – 19.09” L x 11.24” W x 1.72” H | Ports quantity – 24 | Background noise level – 27.5 dB | Power method – 100-240VAC/50-60 Hz | Weight – 10.4 lbs. | Max power consumption – 250W | Operating temperature – 23 to 104° F.
  • The UniFi Switch features auto-sensing IEEE 802.3af/at PoE to power multiple devices on the network | Switching Capacity – 52 Gbps.
  • Two SFP ports support uplinks of up to 1 Gbps | For high-capacity uplinks, each 48-port model includes two SFP+ ports for uplinks of up to 10 Gbps.
  • Each switch port offers custom settings: port name, PoE, network/VLAN configuration, and operation mode (switching, mirroring, or aggregate) - as well as 802.1X Authentication and Radius VLAN support.
Check Stock