Top Poe Splitter Reviews

iCreatin 2-Pack Wall PoE Injector Power Over Ethernet Adapter 802.3af 48V 24W 0.5A for Security IP Cameras IP Phones, 10/100Mbps

• Raspberry Pi 3B+ can work with this poe injector after installed this PoE hat or micro USB PoE Splitter.
• This injector lets you power 802.3af compatible devices, with no additional adapter needed. Just plug the network cable(not included) into your network switch and into the “Data In” port, then plug the cable to your device into the “PoE” port with your existing network cable.
• This Adapter support 10/100/1000Mbps gigabit ethernet connection, RJ45 PoE port using 4,5,7,8 pin as power transfer, Please do not connect any device that does not support the “PoE” port, this will damage your device.
• This is an 802.3af compatible device, but it does NOT include the 802.3af/802.3at compliant detection feature. It supplies power NO MATTER WHAT, so don’t plug the “PoE” side into anything that isn’t ready for it.
• Compatible all 802.3af PoE power device as IP Phone, IP camera, Gateway , Switch, or More…...

PoE Ethernet Power Supply 4 Port POE DC 12V-48V Power Adapter Injector for IP Camera 802.3af/802.3at Device

• Made of plastic material, sturdy and durable to use. Conform to international safety product standards and is safe to use..
• This PoE injector is compatible with IEEE802.3af/at network devices. Apply for IEEE802.3af/at standard POE powered devices.
• This Non standard passive PoE injector is a simple and convenient equipment for PoE or Non PoE devices via an Ethernet cable.
• This device does not have auto detection function and directly supply power to the network devices by force as soon as you connect them, powered device or poe splitter must conform to standard IEEE 802.3af/at, the same time your powered device must support poe pin 4/5(+), 7/8(-) midspan..
• Please select according your device power consumption, in order to ensure stable running, the total power consumption must be lower than the total power supply.Tip: the power voltage should not be over DC48V..

8 Port PoE Injector All in One DC12V-48V 8 Interfaces Passive Adapter Power Over Ethernet Module Injector

• [HIGH QUALITY ]---It does not have auto detection function and directly supply power to the network devices by force as soon as you connect them，all products are rigorously certified.
• [ DURABLE QUALITY]---Apply for IEEE802.3af/at standard POE powered devices other brands IP cameras, or being equipped together with IEEE802.3af/802.3at standard poe splitter for non POE devices. durable quality.
• [MATERIALS]---With high quality materials,This Non standard passive injector is a simple and convenient equipment for PoE or Non PoE devices via an Ethernet cable..
• [SAFE]---Conform to international safety product standards and safe,Suitable for widely used.
• [STABLE]---Made of plastic material, sturdy and durable to use.the performance is stable and reliable.

YIDUOYUNCAI 11Port PoE Switch,8 Port 100Mbps PoE+2*1000Mbps Uplink Port and1Gigabit SFP Slot,150W,802.3af/at,Metal Fanless,Unmanaged Plug and Play

• 【Active poe switch with 802.3af/at compliant】poe switches support poe devices and non-poe devices, but when connecting passive poe device or non-poe device, the switch can only transmit data and cannot power your device, so the connected device needs to be separately powered. Or you can use it with active poe splitter..
• 【AI PD Detection】The poe port will intelligently judge whether the device connected to the port needs power supply. If it is a non-poe device that does not need power supply, the switch will not supply power to these devices and will not damage the device..
• 【Built-in power supply】The power supply is located in the poe switch body and integrated with the switch. It is simple and light. After connecting to our AC Power Cable, the switch can transmit power to the equipment connected to the switch..
• 【Plug and Play】Easy setup with no software installation or configuration needed.
• 【Network cable short-circuit protection mechanism】POE switch is stable and has strong anti-interference ability, protect the fault caused by the short circuit of the network port.Short Circuit, Over Current and Over Voltage Protection..
• 【Fanless design】The fanless design makes poe switch work without any noise..

ANVISION 2-Pack Active 12V PoE Splitter Adapter Plug 5.5mm x 2.5mm IEEE 802.3af Compliant 10/100Mbps for IP Camera AP Voip Phone and More

• Input Voltage: DC 44-56V from poe switch or poe injector.
• Output Power: DC 12V 15.4W Max., Data Rate: 10/100Mbps.
• Full IEEE 802.3af compliant, DC Jack: 5.5mm x 2.5mm, output cable length: 200mm.
• Works with IP camera, Voip phone, AP and other 12V Non-PoE devices.
• 2-Years warranty and unlimited technical support, Package content: 2x PoE splitter.

Goalake 6 Port Gigabit Ethernet Unmanaged PoE+ Switch, 4 Gigabit PoE+ @52W Built-in Power, 1 Gigabit Uplink + 1 Gigabit SFP Slot, 802.3af/at, VLAN Mode, 4kV Lightning Protection, AI Detection

• ...ctive poe switch with 802.3af/at compliant】Goalake poe switches support poe devices and non-poe devices, But when connecting passive poe device or non-poe device,the switch can only transmit data and cannot power your device,so the connected device needs to be separately powered. Or you can use it with active poe splitter..
• 【4 gigabit poe switch@52W 】PoE switch with 4 1000M PoE port + 1 1000M Uplink port,1 x 1G SFP,4×PoE ports providing up to 30W per port, total PoE budget 52W.1 gigabit ethernet Uplink Port for connecting NVR and Internet , etc...
• 【4KV Lightning Protection】Goalake PoE switch have professional lightning protection design-up 4KV port and power supply thunder prevents, with two levels of protection design respectively, effectively restrain the power of lightning from cable, which equivalent to give the entire network monitoring system with a security fence..
• 【AI Watchdog function of poe port】When the data or electrical transmission between the poe port and the terminal device is abnormal, the corresponding poe port of the device will automatically detect the problem and restart the connection..
• 【AI PD Detection】The poe port will intelligently judge whether the device connected to the port needs power supply. If it is a no....

AuviPal 802.3af/at Compliant PoE Splitter (2 Pack), PoE to Micro USB 5V Power and 100Mbps Ethernet Adapter for Raspberry Pi, Fire TV Ethernet Adapter, Chromecast, Wyze Cam v2, Arlo 2 Pro, NanoPi

• Deliver DC 5V 2.4A Power and up to ultra-fast 100M Ethernet data for raspberry pi simultaneously, No need for a nearby AC outlet anymore..
• Original from AuviPal with 10/100Mbps wired fast speeds which gives you a full speed of your internet, Ideal for providing both power and Ethernet for Raspberry Pi 1B, 1B+, 2B, 3B, Not for latest model 3B+, Please search "B07PNQC25X" on amazon for 3B+..
• It utilizes the optimal PoE module solution with Isolation transformer + Standard PD (Powered Devices) chip. Run your Raspberry Pi more stable and safer when compared with others cheap non-isolated transformer and diode PD module..
• PoE HAT Alternative - a cost savings way to achieve POE function for your Raspberry Pi instead of buying an overpriced PoE HAT, What’s more, no need to dismount raspberry pi case or add-on screen anymore by using AuviPal PoE Splitter..
• Fully complies with IEEE 802.3af/at standard, Work with all IEEE 802.3af/at compliant PoE switch and PoE Injector (Not included). Plug and play, no extra effort or configuration required, Set it up in seconds..

2Pack RJ45 Ethernet Splitter Cable Network Adapter 1 Male to 2 Female, Suitable Super Cat5, Cat5e, Cat6, Cat7 Connector LAN Ethernet Cables Internet Adapter, Black

• 【Ethernet 1 to 2 Splitter Cable Multi-Functions】You can easily convert the RJ45 connection to two RJ45 sockets, allowing two computers to share high-speed DSL, cable modem and Ethernet ports without the need for a router..
• 【Widely Compatible】Ethernet Splitter 1 2 Suitable for RJ45 device interface, Compatible with Cat7/6/5/5e, for ADSL, Hubs, Switch, TV, Set-top Box, Router, POE Camera, Computer..
• 【Durable and Good Material】a 2mm thick PCB board is embedded in the conductive circuit to avoid damage to the conductor and leakage. Ensure a longer service life..
• 【Lossless anti-interference】The eight-core pure copper gold-plated pin and Crystal protective cover, 100m stable transmission, metal shielding, non-interference and lossless anti-interference..
• 【Recautions for use】RJ45 Ethernet Splitter does not support two devices to surf the Internet at the same time! Only one device can be connected to the Internet at a time..

Passive Gigabit POE Injector/Splitter, V+ 3,4,5,6 ; V- 1,2,7,8, CAT5 Rated Shielded RJ45 Female connectors (Black), Wire Terminal Connector, All Black Color

TEROW 12 Port Gigabit PoE Switch | Unmanaged Ethernet Switch with 8 Port PoE(30W Each)+2 Uplink+2 SFP Slots Ethernet Splitter with IEEE 802.3af/at | Plug & Play | Fanless Housing | Sturdy Metal

• ..., the port will automatically fuse to protect the safe operation of the switch and other port equipment, and the power supply will be restored after the danger is eliminated..
• 【Built in 120W Power】The unmanaged network switch has a built-in 120W power supply, and each PoE port can provide 30W power. The ethernet splitter supports 12-port full Gigabit transmission speed, including 8 10/100/1000M POE ports, 2 Gigabit uplink ports and 2 SFP ports. It has extremely fast data processing capabilities and supports 100M remote transmission..
• 【Plug & Play】Simple set up with no software to install or configuration needed. Each port supports MDI/MDIX auto-flip and duplex/rate auto-negotiation. And with no configuration necessary making it perfect for home/small office and small-medium businesses. We will provide you with unconditional refund within 30 days to let you have better shopping experience. If you have any questions, please feel free to contact us..

XM1000pro

• 【PoE & IP OVER COAX CONVERTER】LINOVISION’s POE IP Over Coax converter can be used to upgrade analog system to IP surveillance system while using existing coaxial cable. Compatible with RG59, RG6 cables. Supports POE standards 802.3af (PoE) and 802.3at (PoE+). EOC Receiver should be powered by POE switch or POE injector while Transmitter should be connected with POE devices or NON-POE devices.
• 【LONG REACH POE TRANSMISSION】Up to 100Mbps in 300m (1000ft) RG59 cable transmission, max 1000m (3000ft) distance in 10Mbps, working with CCA/CCU RG59/RG6 cable. Support POE power transmission with load capacity 11W over 300m (1000ft) transmission, working with POE IP camera, VoIP phone, POE WiFi AP.
• 【INDUSTRIAL DESIGN WITH BUILT-IN HEAT SINK】Industrial design, with built-in heat sink, ensure super reliability and hassle free transmission. Indoor use ONLY. Plug-and-play, configuration free, makes installation simplest. Small design (3.1"x2.0"x0.9") and light weight.
• 【POINT TO POINT CONNECTION ONLY】Act as MoCA (Multimedia over Coax) in point-to-point connection, transmit video/audio/data/control signal over coaxial cable.
• 【WORRY FREE】1 year warranty, US local technical support + Global after-hour support..

TRENDnet Powerline 500 AV Nano Adapter Kit, Includes 2 x TPL-406E Adapters, Cross Compatible With Powerline 600-500-200, Windows 10, 8.1, 8, 7, Vista, XP, Plug & Play Install, White, TPL-406E2K

• GIGABIT PORTS: 1 x Gigabit Ethernet port and 1 x PoE+ Gigabit Ethernet port. Integrated power supply..
• PoE POWER SUPPLY: This gigabit PoE+ injector supplies a PoE device with PoE (15.4W) or PoE+ (30W) power..
• INSTALLATION FLEXIBILITY: This PoE+ injector has a wall-mountable design that accommodates most installations scenarios..
• GIGABIT SPEEDS: Full Duplex 2Gbps Ethernet speeds with this PoE+ injector..
• PoE DISTANCE: This Gigabit PoE Injector provides a PoE+ network connection up to 100 meters (328 ft.).
• AUTO SENSING TECHNOLOGY: Auto-sensing technology delivers up to 30W to an 802.3at PoE+ device with backwards compatibility for 802.3af PoE (15.4W) devices..

【Upgraded】LINOVISION POE Over Coax EOC Converter IP Over Coax Max 3000ft Power and Data Transmission Over Regular RG59 Coaxial Cable for Upgrading Analog Surveillance System to IP Surveillance System

• 【PoE & IP OVER COAX CONVERTER】LINOVISION’s POE IP Over Coax converter can be used to upgrade analog system to IP surveillance system while using existing coaxial cable. Compatible with RG59, RG6, RG11 cables. Supports POE standards 802.3af (PoE) and 802.3at (PoE+). EOC Receiver MUST be powered by POE switch or POE injector while Transmitter should be connected with POE devices or NON-POE devices.
• 【POE & IP OVER TWIST PAIR CONVERTER】 Each pair of EOC(Ethernet over Coax) Converter is equipped with 2 BNC to Twist Pair connectors, which enables POE over Twist Pair transmission. 100Mbps bandwidth over 330ft regular twist pair cables while 10Mbps over 1485ft for both POE or NON-POE devices. It’s ideal for the CCTV system in elevator cart..
• 【INDUSTRIAL DESIGN WITH BUILT-IN HEAT SINK】Industrial design, with built-in heat sink, ensure super reliability and hassle free transmission. Indoor use ONLY. Plug-and-play, configuration free, makes installation simplest. Small design (3.1"x2.0"x0.9") and light weight..
• 【POINT TO POINT CONNECTION ONLY】Act as MoCA (Multimedia over Coax) in point-to-poi....