Top Plasma Bracket Manufacturer Reviews

Mount-It! Dual Screen TV Ceiling Mount for 37\ to 70\ TVs, Telescoping Adjustable Height Pole, Ceiling Bracket Fits Vaulted and Sloped Ceilings (MI-510)

• DOUBLE FLAT SCREEN MOUNT - Install 2 flat panel TVs back-to-back, securely supports up to 99 lbs for each individual side of the TV bracket..
• HEIGHT ADJUSTABLE - the extending center pole can be adjusted 22 inches to 35.8 inches from the ceiling bracket to the center of the TV..
• TILT AND SWIVEL - The entire ceiling mount can swivel +/- 180 degrees and each side individually tilts +5/-20 degrees to create the perfect viewing angle..
• VESA COMPATIBLE - Fits most LCD, LED, and Plasma flat screens up to 70" with 200x200, 300x200, 300x300, 400x200, 400x400, 600x400 (mm) mounting patterns..
• EASY TO INSTALL - The adjustable ceiling bracket works with flat, vaulted, or sloping ceilings, and ceiling kit comes with a universal hardware kit..

PowerBridge Solutions TWO-CK-TVML DIY-Series Dual Outlet Cable Management System with Flat Screen LED TV Mount for Large 32-Inch to 65-Inch Television Screens

• Dual outlet - in-wall cable management system for wall mounted flat screen LED, LCD, and Plasma Televisions, includes wall mount for your TV.
• The included in-wall 6-foot PowerConnect cable and 6-foot power cord is Code Compliant. Does not include HDMI cables or other low voltage Audio Visual....
• No more messy cables hanging down the wall between the TV and the floor. No electrician needed with snap together power connectors..
• Tilting low profile TV wall mount bracket for 32-65 inch TVs - up to 15 degrees of tilt for LED, LCD, OLED and Plasma flat screen TVs with VESA....
• Top rated product with simple easy DIY installation..

Rfiver Swivel Floor TV Stand with Mount, Wood Base and 2 Flexible Media Shelves for 40 43 49 50 55 60 65 70 75 77 Inch Flat Screens/Curved TVs, Height Adjustable Corner TV Stand for Bedroom and Office

• ...VD player or gaming systems. To keep your place tidy, it features a wire management solution to organize and conceal the wires or cables in the back of the stand..
• 【5 YEARS WORRY-FREE WARRANTY】To ensure your satisfaction, all of Rfiver products are guaranteed by 5-year manufacturer warranty. And our local customer service team is prepared to answer any of your questions and solve your problems with prompt reply..

Dyllica 9-8213 Plasma Start Cartridge 9-8277 for Thermal Dynamics CutMaster 52 Consumables SL60 SL100 Plasma Part Consumables 1pc

• 【Dyllica Brand Plasma Start Cartridge】The plasma Start Cartridge 9-8277 is made by Dyllica Brand.
• It can be used as plasma aftermarket parts which can install on DYThermal Dynamics SL60 SL100 plasma torch.
• 【Plasma Consumables Type & Ref Number】Plasma Start Cartridge, item ref number is 9-8213 / 9-8277.
• 【As SL60 Plasma Consumables Usage】The 9-8213 /9-8277 Plasma Start Cartridge can install on DYThermal Dynamics SL60 torch with Cutmaster 38 / 52 / 12 / 20 /25 plasma cutter machine.
• 【As SL100 Plasma Consumables Usage】The 9-8213 /9-8277 Plasma Start Cartridge also can install on DYThermal Dynamics SL100 torch with Cutmaster 102 / 152 / 40 plasma cutter machine.
• 【As SL60QL Plasma Consumables Usage】The 9-8213 /9-8277 Plasma Start Cartridge also can install on DYThermal DynamicsSL60QL torch with Cutmaster 58 / 60i plasma cutter machine.

Fully Adjustable - TV Wall Mount Bracket for Sharp LC-40LE810UN 40 Inch LCD HDTV Television

Fully Adjustable - TV Wall Mount Bracket for Panasonic TH-50PX80U 50' Inch Plasma HDTV Television

5Rcom Universal TV Floor Stand with 2 Shelves for 27 32 37 42 47 50 55 65 inch Tall LCD LED Flat or Curved Screens TVs Skinny TV Stand with Swivel Mount and Height Adjustable, Black

• ✌HEIGHT ADJUSTMENT -- There are simply 6 levels height adjustment of the swivel mount to meet your different TV size or seating height requirements, this slim tv stand height from 39" to 51" off the floor, making your TV always at eye level for better view. Sturdy steel design is backed with a 10 Year Manufacturer Warranty. If you encounter a problem, our customer service team in the United States will help you 7 days a week, and we will reply to you within 12 hours..
• ✌EASY TO PUT TOGETHER -- The swivel floor tv stand is easy to assemble with the easy-to-understand directions and all necessary hardwares. No trouble assembling this entertainment center. In addition, cable management is included for tidy and clean cable management..

Mount-It! Long Arm TV Wall Mount with 26 Inch Extension Swing Out Full Motion Design for Corner Installation Fits 40 50 55 60 65 70 Inch Flat Screen TVs 220 Lb Capacity

• Universal TV wall mounting bracket with adjustable arms that fits most of 42-70" LCD/LED/Plasma TVs on the market (even up to some 80 inch TVs) up to....
• 26 Inches of long extension makes it ideal for corner installations of larger TVs. Compatible with Samsung, Sony, LG, Sharp, Insignia, Vizio, Haier,....
• Tilt, Swivel, Articulate, Extend, Collapse with this universal TV wall mounting bracket. Full motion capability makes is ideal for corner....
• Continuous Tilt Feature (up to 15 degrees up or down) for Better Viewing Angle and Reduced Glare. Large open wall plate design assures easy access to....
• Weight rated to 220 lbs. This bracket is one of the strongest single arm swivel brackets available on Amazon. Install your precious TV with....

WeldingStop 770496 770723 Electrode Tip for Hobart Plasma Cutter Airforce 250ci HP-25 and AirForce 500i HP-50 Torch

• These hobart plasma cutter consumables are fitting in AirForce 250ci plasma cutter HP-25 torch and AirForce 500i cutter HP-50 plasma torch.
• Ref. code of AirForce 250ci plasma cutter is 500534, HP-25 torch is 232647.
• Ref. code of AirForce 500i plasma cutter is 500548, HP-50 torch is 244121.
• The hobart 770723 plasma cutter parts kit including 5pcs electrodes and 5pcs tips, which are compatible with hobart plasma 250ci and hobart plasma 500i plasma cutter machine.
• Every package including 10pcs airforce 250ci plasma consumables or airforce 500i plasma consumables which are made by WS.
• All the hobart plasma cutter accessories are Replacement Parts, NOT Hobart Original Consumables.

WeldingStop 770496 Electrode and Tip Kit for Hobart AirForce 250ci 500i HP-25 HP-50 Plasma Torch 4-Pack

• These hobart plasma cutter consumables are fitting in AirForce 250ci plasma cutter HP-25 torch and AirForce 500i cutter HP-50 plasma torch.
• Ref. code of AirForce 250ci plasma cutter is 500534, HP-25 torch is 232647.
• Ref. code of AirForce 500i plasma cutter is 500548, HP-50 torch is 244121.
• The hobart 770496 plasma cutter parts kit including 2pcs electrodes and 2pcs tips, which are compatible with hobart plasma 250ci and hobart plasma 500i plasma cutter machine.
• Every package including 4pcs airforce 250ci plasma consumables or airforce 500i plasma consumables which are made by WS.
• All the hobart plasma cutter accessories are Replacement Parts, NOT Hobart Original Consumables.

SL40 Plasma Torch Electrode 9-0096 fit SL40 Plasma Torch Thermal Dynamics Cutmaster 42 Plasma Cutter Consumables 10pcs

• Plasma consumable type--SL40 plasma torch Electrode Tip kit, Rated cutting current 40amp plasma tip.
• SL40 plasma torch consumables Ref code—9-0096 9-0094.
• The SL40 plasma tip can fit Thermal Dynamics Cutmaster 42 (1-4200，1-4200-7，7-0040) Plasma Cutter SL40 Torch (Ref. Code 7-0040).
• The 9-0096 9-0094 plasma nozzle can also fit Thermal Dynamics Cutmaster 12+ / Cutmaster 12 Plus (1-4200-4) Plasma Cutter SL40 plasma cutting torch (Ref. Code 7-0040).
• The plasma tip are replacement parts which produced according to the standard size by WeldingStop, and not original.

Arlington TVBR2505K Flat Panel TV Cable Organizer 2-Gang Kit with Recessed Power Solution

• Recessed bracket sits behind the wall to help you hide wires.
• Designed for power and low voltage wiring-perfect for lcd, led, plasma tv in black.
• Wires stay hidden behind wall, mounting wings hold boxes securely against wall when screws are tightened.

WeldingStop 9-0094 9-0096 SL40 Torch Plasma Electrode Tip fit Thermal Dynamics Cutmaster 42/12+ Plasma Cutter SL40 Plasma Torch Consumables 10pcs

• Plasma consumable type--SL40 plasma torch Electrode Tip kit, Rated cutting current 40amp plasma tip.
• SL40 plasma torch consumables Ref code—9-0096 9-0094.
• The SL40 plasma tip can fit Thermal Dynamics Cutmaster 42 (1-4200，1-4200-7，7-0040) Plasma Cutter SL40 Torch (Ref. Code 7-0040).
• The 9-0096 9-0094 plasma nozzle can also fit Thermal Dynamics Cutmaster 12+ / Cutmaster 12 Plus (1-4200-4) Plasma Cutter SL40 plasma cutting torch (Ref. Code 7-0040).
• The plasma tip are replacement parts which produced according to the standard size by WeldingStop, and not original.