Top Parting Grooving Reviews

THINBIT SFT12R 1/2\ Right Hand, Straight, Flushtop toolholder. Use with Grooving, Threading, face Grooving and Parting Inserts

  • See Downloads section below item photos for detailed product information, technical information and compatible inserts..
  • Original THINBIT toolholder designed for manual, benchtop and jeweler lathes. Toolholder includes: C Clamp, S3808 Screw, P0308 Pin and W1005 Wrench..
  • This toolholder is compatible with grooving, threading, face grooving and parting inserts..
  • Use inserts beginning with 'S'. Use with Right Hand and centered inserts..
Check Stock

THINBIT SFT38R 3/8\ Right Hand, Straight, Flushtop toolholder. Use with Grooving, Threading, face Grooving and Parting Inserts

  • See Downloads section below item photos for detailed product information, technical information and compatible inserts..
  • Original THINBIT toolholder designed for manual, benchtop and jeweler lathes. Toolholder includes: A Clamp, S5608 Screw, P0308 Pin and W1005 Wrench..
  • This toolholder is compatible with grooving, threading, face grooving and parting inserts..
  • Use inserts beginning with 'S'. Use with Right Hand and centered inserts..
Check Stock

THINBIT LGS12R 1/2 inch, Right Hand Orientation, Straight toolholder. Use with Grooving, face Grooving, Threading and Parting Inserts.

  • See Downloads section below item photos for detailed product information, technical information and compatible inserts..
  • Designed for CNC, Swiss and conventional machines. Toolholder includes: X Clamp, S3808 Screw, W1005 Wrench and P0206 Pin..
  • This toolholder is compatible with grooving, face grooving, threading and parting inserts..
Check Stock

THINBIT LGS58R 5/8 inch, Right Hand Orientation, Straight toolholder. Use with Grooving, face Grooving, Threading and Parting Inserts.

  • See Downloads section below item photos for detailed product information, technical information and compatible inserts..
  • Designed for CNC, Swiss and conventional machines. Toolholder includes: X Clamp, S3808 Screw, W1005 Wrench and P0206 Pin..
  • This toolholder is compatible with grooving, face grooving, threading and parting inserts..
Check Stock

Sandvik Coromant RF123H13-2525B-220BM Steel CoroCut 41641 Shank Tool for Face Grooving Holder, 0.51\ Maximum Depth of Cut (Pack of 1)

  • CoroCut 1-2 25 mm square shank external machining-shank tools.
  • Square shank parting grooving face grooving holder CoroCut tool holder.
Check Stock

ISCAR DGR2202C-6D IC328 Carbide Parting Inserts Cutter Tools Cutting Holder Grooving Inserts CNC

  • A thin PVD coated TiCN layer on a tough substrate, for milling, parting, and grooving mainly steel and stainless steel at low to medium cutting speeds especially in unstable machining conditions.
  • Grade or Coating Type: PVD / Coating Layers: TiCN.
  • ISO Range - P/M/K(P25-P40)(M30-M40) / ISO Range - N/S/H (S20-S30).
  • Iscar DO Grip inserts are first choice for soft materials, parting of tubes, small diameters, and thin-walled parts.
Check Stock

OSCARBIDE 1/2\Indexable Grooving Parting Holder QA08R-20 Heavy Duty Nickel Plated Right -Hand Lathe Cut Off Tool with Carbide Insert GTN-2, 1 Piece

  • Size：Shank Size (B x H): 1/2" x 1/2" Overall Length (L): 4.5".
  • GTN-2 insert stop assures accuracy of center height and precise depth of cut.
  • Simple set-up with one piece integral shank holder adapts easily to any machine type and turret configuration.
  • Opening of wide grooves by plunging and side turning,wedge clamping of insert provides superior stability in close quarters face grooving cuts.
  • For external parting & grooving, profile/copy turning.
Check Stock

OSCARBIDE 1/2\ Indexable Lathe Grooving Parting Holder with 10 Pieces GTN-2(QC1402) Heavy Duty Nickel Plated QA08R-20 Right -Hand Cut Off Tool Carbide Inserts

  • Size：Shank Size (B x H): 1/2" x 1/2" Overall Length (L): 4.5".
  • GTN-2 insert stop assures accuracy of center height and precise depth of cut.
  • Simple set-up with one piece integral shank holder adapts easily to any machine type and turret configuration.
  • Opening of wide grooves by plunging and side turning,wedge clamping of insert provides superior stability in close quarters face grooving cuts.
  • For external parting & grooving, profile/copy turning.
Check Stock

THINBIT 3 Pack SGI033D2 0.033\ Width 0.099\ Depth, Uncoated Carbide, Sharp Corner, Grooving Insert for Steel, Cast Iron and Stainless Steel with Interrupted Cuts

  • See Downloads section below item photos for detailed product information, technical information and compatible toolholders..
  • Perfect for o-rings, snap rings and piston rings. Cuts within 1/16" of collet face or shoulder of larger diameter..
  • Designed for plunge grooving up to .099" deep. Can also be used for parting stock up to .198"..
  • Uncoated DURA-MAX 2000 carbide grooving insert for steel, cast iron and stainless steel with interrupted cuts..
Check Stock

THINBIT 3 Pack SGI025D2 0.025\ Width 0.075\ Depth, Uncoated Carbide, Sharp Corner, Grooving Insert for Steel, Cast Iron and Stainless Steel with Interrupted Cuts

  • See Downloads section below item photos for detailed product information, technical information and compatible toolholders..
  • Perfect for o-rings, snap rings and piston rings. Cuts within 1/16" of collet face or shoulder of larger diameter..
  • Designed for plunge grooving up to .075" deep. Can also be used for parting stock up to .150"..
  • Uncoated DURA-MAX 2000 carbide grooving insert for steel, cast iron and stainless steel with interrupted cuts..
Check Stock

THINBIT 3 Pack SGI040D2 0.040\ Width 0.100\ Depth, Uncoated Carbide, Sharp Corner, Grooving Insert for Steel, Cast Iron and Stainless Steel with Interrupted Cuts

  • See Downloads section below item photos for detailed product information, technical information and compatible toolholders..
  • Perfect for o-rings, snap rings and piston rings. Cuts within 1/16" of collet face or shoulder of larger diameter..
  • Designed for plunge grooving up to .100" deep. Can also be used for parting stock up to .200"..
  • Uncoated DURA-MAX 2000 carbide grooving insert for steel, cast iron and stainless steel with interrupted cuts..
Check Stock

OSCARBIDE 3/8\x1/2\Indexable Grooving Parting Holder Nickel Plated Heavy Duty QA06R-20J Right -Hand Lathe Cut Off Tool with GTN-2 Carbide Insert, 1pcs

  • Size：Shank Size (B x H): 1/2"X3/8: Overall Length (L):3.5".
  • GTN-2 insert stop assures accuracy of center height and precise depth of cut.
  • Simple set-up with one piece integral shank holder adapts easily to any machine type and turret configuration.
  • Opening of wide grooves by plunging and side turning,wedge clamping of insert provides superior stability in close quarters face grooving cuts.
  • For external parting & grooving, profile/copy turning.
Check Stock

THINBIT 3 Pack SGI039D5 0.039\ Width 0.100\ Depth, Uncoated Carbide, Sharp Corner, Grooving Insert for Non-Ferrous Alloys, Aluminium and Plastic Without Interrupted Cuts

  • See Downloads section below item photos for detailed product information, technical information and compatible toolholders..
  • Perfect for o-rings, snap rings and piston rings. Cuts within 1/16" of collet face or shoulder of larger diameter..
  • Designed for plunge grooving up to .100" deep. Can also be used for parting stock up to .200"..
  • Uncoated DURA-MAX 5000 carbide grooving insert for non-ferrous alloys, aluminium and plastic without interrupted cuts..
Check Stock