Top Parallel Clamps Reviews

Fulton Spring Clamp Pliers with 13 Spring Clamps and Hip Clip Made in the USA

  • If you have ever attempted to firmly secure and clamp mitered corners then you know what kind of a challenge it can be to say the least. You could always try those large, cumbersome and very expensive parallel clamps to try and work each corner just right to hold your mitered corners together. That too can be extremely challenging and not to mention very costly..
  • The Fulton Miter Spring Clamps are the ideal and cost effective way to quickly and easily clamp mitered corners without all of the hassle you typically have with other clamps. The Spring Miter Clamps are made from a high strength steel. The clamps can be applied using your hand to squeeze the clamp to open the sharp, pointed tips or you can use the Miter Spring Pliers to make it super easy to to spread the tips apart..
  • Once you have the clamp tips spread apart, simply place the spring clamp onto the mitered corner you need to secure, then release the clamp so the tips pierce into the wood and keep your stock in place. Depending on the size of your project, you may need to use more than one spring clamp on each corner to hold your stock in place..
  • Unlike other available spring clamps, the Fulton Miter Spring Clamps don’t cut into your stock piece. The uniquely designed tips are designed to pie....
Check Stock

Pony Tools 3202-HT 6 Pack 2in. Spring Clamp, Orange

  • These Pony Spring Clamps are perfect for gluing models, crafts, and other projects that require one-handed clamping.
  • The instant opening and closing feature allows you to apply and remove them from your work quickly.
  • Soft, pivoting jaw pads keep work pieces protected and allow the clamps to hold oddly-shaped objects more easily.
  • The jaws and handles are made with glass filled nylon and the heavy-duty tempered steel spring allows pressure adjustments to be made from 1 to 50 pounds of clamping force.
  • Handle contours enable comfortable use. Non-slip jaws become parallel at maximum opening capacities.
Check Stock

HANZE 2 Pcs Butterfly Frame Hinge Clamp DIY Hobby Tool for Silk Screen Printing

  • ♚ Used for fixing screen version when printing . It can be fixed on any operation table, or it can be used to Make the operation table. It is easy and convenient to operate.
  • ♛ Easy to install.Take two points on the straight line, install the butterfly clips, and Install one or several pairs in parallel as needed..
  • ♜ Durable and rustproof.These clamps also feature positive locking for perfect registration..
  • ♝ For Starters, new beginners learn how to screen printing..
  • ♞ These clamps also feature positive locking for perfect registration with 4 screws..
Check Stock

POWERTEC 71368 Woodworking Parallel Clamps 24-Inch | Jaw Bar Clamp Spreader Tool | 2PK

  • Includes: (two) piece 24-inch parallel jaw Clamp set.
  • Application: using a deep 3-3/4” throat depth for optimized pressure distribution and a powerful clamping force of over 880lbs, these parallel jaw bar clamps will make your woodworking, furniture and table top glue-ups much easier.
  • Premium design: Each clamp features an ergonomic soft grip handle, cold Steel rail, three removable jaw pads that are non-marring and possess Rapid action movement, and an easily convertible Clamp spreader tool.
  • 90 Degree angle: Clamp provides high precision clamping at 90 Degree angles, keeping your material and work pieces square and free from movement.
  • Versatility: Whether your project requires evenly applied clamping pressure, A secure locking system, or even the use of a quick bar clamp spreader – You’ll have a firm grip of it all with this convenient tool.
Check Stock

JORGENSEN 8036 Cabinet Master 36 Inch 90 Degree Parallel Steel Bar Clamp

  • These 90-degree parallel steel bar clamps have more benefits and enhanced features than any clamp on the market today.
  • This product is easy to use easy to install and highly durable.
  • Multiple clutch disks are made from hardened and plated round edge high carbon steel to give greater support along the 1-3/16" x 3/8" steel bar.
  • Clamping faces are 3-3/4 inch height and 1-7/8 inch width.
  • Ideal for do-it-your-selfers, hobbyist, carpenters, cabinet makers, woodworkers, metalworkers and professional trades people of all types.
  • Pony Tools Inc. (founded 1903) is the manufacturer of the bar clamps and they are made with U.S. and foreign parts in our Chicago factory.
Check Stock

Bessey KR3.550 50-Inch K Body REVO Fixed Jaw Parallel Clamp, 2-Pack

  • Perfect Parallel jaw design for, 90-Degree clamping of materials, glue-ups of materials, general purpose clamping of wood, composites, plastics, light metals, and mixed materials, can be attached to work surfaces using TK-6 clamps.
  • 3-3/4-Inch throat depth, with 3 removable jaws pads designed to protect material surfaces, two rail protector pads designed to keep clamped material from contacting rail surfaces. Rail protector pads snap off when not needed..
  • 1,500 lb clamping force, with ergonomic designed 2 component molded soft grip handle.
  • rapid action jaw opening and closing, simple raise handle away from steel rail and slide moveable jaw to desired point, reverse movable jaw for spreading.
  • cold drawn steel alloy rail with six serrated edges for secure, slip pro0f clamping, K Body REVO clamps sit flush on work surface for easy set ups.
Check Stock

IRWIN Tools Record Wooden Handscrew Clamp, 4 1/2-inch Jaw Opening (226800)

  • Jaws adjust to any angle for clamping non-parallel surface and odd shapes..
  • Easy to adjust the angles of the jaws to fit odd-shaped work pieces..
  • Wooden clamps grip securely without marring work piece surfaces..
  • 12” jaw length for maximum surface coverage..
Check Stock

HHIP 3406-1032 50L x 20W x 14H mm Triple\V\ Steel V-Block Set

  • Dimension - 2-3/8 x 2-3/8 x 2 --- 90 degree v-block pair with clamps..
  • Material - Made of hardened steel,Hardness: hrc 58 to 60..
  • Square and parallel to accuracy - 0.0002..
Check Stock

Anytime Tools 8 pc V-Block & Clamp Double Sided 90° Machinist Tool

  • Kit Includes 2 pairs 1-1/4" x 1-1/4" x 1-5/8" & 1-1/2" x 1-1/2" x 2".
  • V-Blocks made of chrome steel and hardened to Rockwell 60C and ground..
  • All sides are ground square and parallel to each other..
Check Stock

Rubber Flex Coupling Parallel 2” Tubular x 2\ Tubular

  • FLEXIBLE RUBBER. Flexible rubber parallel coupling that fits with steel piping, copper, cast iron, plastic, copper and lead..
  • HIGHLY DURABLE. Sealed leak-proof flexible connectors with stainless steel clamps that will last.
  • MANY APPLICATIONS. Applications include non-pressure drain, waste, and vent piping systems and sewer systems indoors and outdoors.
  • CERTIFIED AND UPC APPROVED. Conforms to ASTM C1173, CSA B602, Certified and UPC Approved, Rated for underground use..
Check Stock

Rubber Flexible Coupling Parallel 1-1/2 inch x 1-1/2 inch

  • Flexible rubber parallel coupling that fits with steel piping, copper, cast iron, plastic, copper and lead.
  • Applications include non-pressure drain, waste, and vent piping systems and sewer systems indoors and outdoors.
  • Sealed leak-proof flexible connectors with stainless steel clamps that will last.
  • Double fitting size: 1-1/2” x 1-1/2”.
  • Conforms to ASTM C1173, CSA B602, Certified and UPC Approved, Rated for underground use.
Check Stock

Foot Hammock Under Desk Foot Rest | Adjustable Office Footrest with Headphones Holder | Desk Hammock Durable Screw in Rubber Clamps | Black

  • SUITABLE FOR ALL DESKS: The Foot desk hammock is suitable for most desk types with or without a side apron. Table top Thickness :.
  • Upgraded CLAMPS: The fixed rubber footed clamps can be adjusted to your most comfortable position without worrying about your foot hammock sliding or falling down. It can also act as a headphones holder/ handbag/backpack holder for an even versatile experience..
  • DURABILITY BREATHABLE FABRIC: The Footrest under Desk Hammock is made by 100% premium quality cotton fabric with 4 layers, adopting breathable material brings your feet soft and cool feeling without worrying about sweating or other discomfort..
  • PORTABLE AND ADJUSTABLE: There are two ways to using relax your legs and feet. Low down just for a slight lift during work hours or high up parallel to your thighs when you really want your legs up during lunch. You will love it better than the make shift chair.
  • NO RISKS - LIFETIME GUARANTEE and MONEY BACK policy, no questions asked. GET your underdesk foot hammock!.
Check Stock

DEWALT Scroll Saw, Variable-Speed, 1.3 Amp (DW788), Yellow, 20-Inch

  • Double parallel link arm design dramatically reduces vibration and noise for extremely accurate cuts.
  • Exclusive tool free blade clamps allow blade changes in seconds. Depth of Cut (inches): 2 inch.
  • On off switch, electronic variable speed, flexible dust blower, and blade tensioning lever all located on front upper arm.
  • Arm design pivots from back of the saw to front, shortening the arm movement for smoother, quieter operation.
  • Arm lifts so blade can be easily threaded through the material for inside cuts.
Check Stock